Vans
Ford Transit Custom / Tourneo Custom reliability
In 156,185 UK MOT tests, 8.6% of Ford Transit Custom / Tourneo Custom cars failed for a mechanical or structural defect. The median van of the same age and mileage: 11.5%.
- Best years
- 2018, 2019, 2020
- Years with most failures
- 2022
- Weak spot at high mileage
- Nothing stands out against the class
- Official recalls
- 19 recalls, 12 serious
- Mechanical failure rate
- 8.6%
- Class median, same age and mileage
- 11.5%
- MOT tests
- 156,185
- US owner complaints
- 0
MOT results by test year
The whole fleet of this model at each year’s MOT, against its class at the same age and mileage. Shows whether the model keeps its standing as it ages.
| MOT year | Tests | Mechanical fail | Class median | Any fail |
|---|---|---|---|---|
| 2024 | 156,185 | 8.6% | 11.5% | 22.5% |
| 2023 | 110,599 | 8.2% | 10.7% | 21.2% |
Failure rate by year of first registration
Mechanical failure rate at the 2024 MOT, by the year the car was first registered, against the median of its class at the same age and mileage.
| Year | Tests | Mechanical fail | Class median | Any fail | Recalls |
|---|---|---|---|---|---|
| 2024 | 84 | 2.4% | 1.2% | 6.0% | 6 |
| 2023 | 224 | 1.3% | 3.0% | 5.4% | 4 |
| 2022 | 1,393 | 6.3% | 4.9% | 16.9% | 2 |
| 2021 | 44,302 | 7.6% | 8.9% | 23.7% | 4 |
| 2020 | 35,678 | 8.2% | 10.3% | 21.8% | 6 |
| 2019 | 44,384 | 8.5% | 13.0% | 21.4% | 6 |
| 2018 | 29,115 | 10.6% | 15.0% | 23.4% | 1 |
| 2017 | 300 | 17.0% | 18.5% | 28.3% | 2 |
| 2016 | 305 | 18.7% | 22.4% | 28.2% | 1 |
| 2015 | 202 | 28.2% | 24.8% | 36.1% | 0 |
| 2014 | 116 | 29.3% | 28.3% | 37.9% | 0 |
| 2013 | 53 | 26.4% | 31.8% | 41.5% | 0 |
What fails, by mileage
Share of MOT tests that failed on each system. Wear items (bulbs, tyres, wipers, plates) are excluded from the reliability score.
(…) = Class median, same age and mileage
Pre-purchase checklist for the mechanic
Built from the systems where this model fails more often than its class at 100,000 km and above, and from open recalls.
- Recalls: 5 serious recalls name this model — ask for proof the work was done
- SR/02824/26 · 2024–2026 · A touch condition between the diesel fuel tank and the DCIV bulkhead bracket bolt may cause damage to the fuel tank over time and fuel to…
- SR/02314/26 · 2023–2025 · Cracks in the fuel line could lead to a fuel leak above the exhaust after-treatment systems. If the leaking fuel comes into contact with…
- SR/02057/26 · 2023–2026 · During installation of the high-security locks, metal shavings from the B-pillar may have damaged the seatbelt. This could reduce the…
- SR/00540/26 · 2025 · The weld seam on the seat frame is defective. In the event of an accident, a defective weld seam may result in insufficient restraining…
- SR/00252/26 · 2025 · The driver-side airbag inflator could rupture during deployment and not fully inflate. In addition, the release of high-pressured gas may…
Check a specific car by its VIN on the official sites: NHTSA (US) · DVSA (UK)
Official recalls
Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.
A touch condition between the diesel fuel tank and the DCIV bulkhead bracket bolt may cause damage to the fuel tank over time and fuel to leak onto hot engine or exhaust components. As a result, the leaking fuel may…
SR/02824/26 ↗Full text
A touch condition between the diesel fuel tank and the DCIV bulkhead bracket bolt may cause damage to the fuel tank over time and fuel to leak onto hot engine or exhaust components. As a result, the leaking fuel may ignite and result in a fire.
Excessive gas emission has been identified in the affected 12V batteries. In the absence of a vent tube, hazardous gases such as hydrogen sulphide may enter the driver compartment from under the front seat, posing a…
SR/00932/26 ↗Full text
Excessive gas emission has been identified in the affected 12V batteries. In the absence of a vent tube, hazardous gases such as hydrogen sulphide may enter the driver compartment from under the front seat, posing a risk of injuries.
Cracks in the fuel line could lead to a fuel leak above the exhaust after-treatment systems. If the leaking fuel comes into contact with hot components, it could ignite and cause a vehicle fire.
SR/02314/26 ↗During installation of the high-security locks, metal shavings from the B-pillar may have damaged the seatbelt. This could reduce the restraining effectiveness of the seatbelt in the event of an accident, increasing the…
SR/02057/26 ↗Full text
During installation of the high-security locks, metal shavings from the B-pillar may have damaged the seatbelt. This could reduce the restraining effectiveness of the seatbelt in the event of an accident, increasing the risk of injury.
The weld seam on the seat frame is defective. In the event of an accident, a defective weld seam may result in insufficient restraining effect of the seatbelt, increasing the risk of injuries.
SR/00540/26 ↗The driver-side airbag inflator could rupture during deployment and not fully inflate. In addition, the release of high-pressured gas may propel pieces of the inflator and airbag module into the occupant compartment.…
SR/00252/26 ↗Full text
The driver-side airbag inflator could rupture during deployment and not fully inflate. In addition, the release of high-pressured gas may propel pieces of the inflator and airbag module into the occupant compartment. This could increase the risk of injury.
Show 13 more recalls
A wiring harness comes into contact with the brake lines. This may lead to wear, corrosion and a leak in the brake lines and to reduced braking performance, which may lead to an increased risk of accidents.
SR/02877/25 ↗The rear shock absorbers could break and impair driving stability, which could damage the rear brake line and/or cause a release of the coil spring. This increases the risk of accidents and injuries.
SR/03607/25 ↗A bent anode plate on the high-voltage battery cells could lead to a short circuit, consequently leading to engine failure and the shutdown of the battery, increasing the risk of fire.
SR/03119/25 ↗One or more bolts on the bottom cover of the power distribution board can break and may lead to various electrical malfunctions. This can lead to the vehicle catching fire due to an increased resistance.
SR/02574/25 ↗Some seat screws may not be properly tightened, leading the seat to become loose. This can make the restraining devices less effective, increasing the risk of injury.
SR/02169/25 ↗A faulty part within the high-voltage battery cells could cause the battery to short-circuit and cause a fire.
A12/02543/23 ↗Due to an error in the assembly process, there might be a single, loose screw in the steering support.The loose screw could cause a sudden, temporary blocking of the steering while the vehicle is in motion, increasing…
A12/00853/21 ↗Full text
Due to an error in the assembly process, there might be a single, loose screw in the steering support.The loose screw could cause a sudden, temporary blocking of the steering while the vehicle is in motion, increasing the risk of an accident.
The weld penetration on the left-hand lower control arm does not meet specification.As a result, cracks can be formed on the control arm, increasing the risk of an accident.
A12/01358/20 ↗The lower control arms fitted to vehicles may have missing or partial welds. As a result, the control arms could break, increasing the risk of an accident.
A12/01205/20 ↗The fuse for the electronic Run On Water Pump (ROWP) is inadequate and will not prevent it from overheating in case of failure.This will lead to the melting of the pump body and wiring, increasing the risk of fire.
A12/00937/20 ↗The twin battery positive cable might have been wrongly fitted.Consequently, it could loose itself leading to a loss of engine power or even a localised overheating and melting of components, increasing the risk of…
A12/00508/20 ↗Full text
The twin battery positive cable might have been wrongly fitted.Consequently, it could loose itself leading to a loss of engine power or even a localised overheating and melting of components, increasing the risk of accident or the vehicle catching fire.
The shoulder height adjuster bolt on the driver-side's front seatbelt may be incorrectly torqued. As a result, in the event of an accident, the seatbelt anchorage bolt may separate from the seatbelt shoulder height…
A12/0353/19 ↗Full text
The shoulder height adjuster bolt on the driver-side's front seatbelt may be incorrectly torqued. As a result, in the event of an accident, the seatbelt anchorage bolt may separate from the seatbelt shoulder height adjuster, leading to injuries.
null The vehicles pose the risk of injuries because they have been fitted with a brake pedal pin retaining "R" clip which does not meet material specification. Spring tension of the clip will be reduced. As a result,…
A12/0290/13 ↗Full text
null The vehicles pose the risk of injuries because they have been fitted with a brake pedal pin retaining "R" clip which does not meet material specification. Spring tension of the clip will be reduced. As a result, there is the possibility that the clip could come off, allowing the brake pedal to detach from the brake booster push rod. This would result in loss of brake actuation and could lead to an accident.