AutoDefects
English

Vans

Mercedes-Benz Vito / V-Class reliability

In 103,729 UK MOT tests, 22.1% of Mercedes-Benz Vito / V-Class cars failed for a mechanical or structural defect. The median van of the same age and mileage: 25.4%.

82of 100High reliability13% fewer mechanical failures than the class
Best years
2010, 2012, 2013
Years with most failures
2020
Weak spot at high mileage
Nothing stands out against the class
Official recalls
47 recalls, 17 serious
Mechanical failure rate
22.1%
Class median, same age and mileage
25.4%
First MOT (3 years old), 2021
9.3% (9.3%)
MOT tests
103,729
US owner complaints
0

MOT results by test year

The whole fleet of this model at each year’s MOT, against its class at the same age and mileage. Shows whether the model keeps its standing as it ages.

MOT yearTestsMechanical failClass medianAny fail
2024103,72922.1%25.4%31.5%
2023105,00421.9%25.4%32.0%

Failure rate by year of first registration

Mechanical failure rate at the 2024 MOT, by the year the car was first registered, against the median of its class at the same age and mileage.

This modelClass median
0%15%30%2004: 34.9%2004 Class median: 37.6%042005: 36.0%2005 Class median: 40.6%2006: 33.5%2006 Class median: 39.8%062007: 32.7%2007 Class median: 37.6%2008: 31.4%2008 Class median: 38.1%082009: 29.6%2009 Class median: 37.0%2010: 27.8%2010 Class median: 36.1%102011: 28.1%2011 Class median: 34.7%2012: 27.2%2012 Class median: 34.1%122013: 25.1%2013 Class median: 31.6%2014: 23.8%2014 Class median: 29.4%142015: 21.7%2015 Class median: 26.3%2016: 20.2%2016 Class median: 23.6%162017: 18.7%2017 Class median: 20.1%2018: 15.8%2018 Class median: 15.4%182019: 13.6%2019 Class median: 14.2%2020: 13.2%2020 Class median: 10.6%202021: 9.3%2021 Class median: 9.3%2022: 5.8%2022 Class median: 5.6%222023: 3.0%2023 Class median: 3.2%2024: 0.0%2024 Class median: 1.2%24
YearTestsMechanical failClass medianAny failRecalls
2024760.0%1.2%0.0%1
20233053.0%3.2%9.2%1
20226065.8%5.6%11.7%1
20215,4969.3%9.3%21.2%8
20205,17013.2%10.6%24.7%14
201911,63513.6%14.2%22.7%20
20188,72315.8%15.4%23.6%10
201711,20718.7%20.1%26.1%11
20167,48520.2%23.6%28.2%10
20155,98921.7%26.3%30.9%11
20145,37123.8%29.4%34.2%12
20135,53425.1%31.6%34.1%4
20124,93427.2%34.1%36.7%2
20113,95328.1%34.7%38.7%2
20104,50627.8%36.1%39.7%1
20094,46429.6%37.0%39.8%1
20084,73931.4%38.1%42.4%1
20074,62432.7%37.6%42.3%1
20063,85433.5%39.8%44.0%2
20052,20436.0%40.6%45.8%2
20041,07034.9%37.6%42.9%1
Older years (7)
YearTestsMechanical failClass medianAny failRecalls
200347936.5%38.9%43.8%1
200248336.2%37.9%44.1%1
200126436.0%35.0%44.3%0
200014742.2%33.6%46.9%0
199915639.7%34.8%48.1%0
199818237.4%33.0%50.0%0
19977147.9%33.9%52.1%0

Most common MOT failures

The defects testers recorded most often on this model, in DVSA’s own wording (English), per 1,000 MOT tests.

Defect (DVSA wording)SystemPer 1,000 tests
Coil spring: fractured or brokenSuspension and wheels41.8
Rbt (sp): efficiency below requirementsBrakes40.4
tread depth below requirements of 1.6mmTyres (wear)35.1
ball joint excessively wornSuspension and wheels31.7
Wipers: does not clear the windscreen effectivelyWipers and windscreen (wear)31.3
Position lamp: not workingLights and electrics (wear)28.6
Headlamp: not working on dipped beamLights and electrics (wear)27.4
Malfunction indicator lamp: inoperative or indicates a malfunctionEngine, exhaust and emissions26.6
Stop lamp: not workingLights and electrics (wear)26.1
Parking brake performance: inoperative on one sideBrakes25
Washers: provides insufficient washer liquidWipers and windscreen (wear)23.9
Brake pads: less than 1.5 mm thickBrakes22.5
Rbt (sp): efficiency less than 50% of the required valueBrakes22.5
Component mounting prescribed areas: prescribed area excessively corroded significantly reducing structural strengthSuspension and wheels20
Rigid brake pipes: excessively corrodedBrakes19.2

What fails, by mileage

Share of MOT tests that failed on each system. Wear items (bulbs, tyres, wipers, plates) are excluded from the reliability score.

System0-50k km50-100k km100-150k km150k+ km
Mechanical fail5.7% (5.8)12.9% (13.2)18.6% (20.1)26.2% (30.9)
Tests4,77514,27617,70766,971
Suspension and wheels2.0% (1.3)4.6% (4.7)8.0% (9.4)12.5% (16.2)
Brakes2.6% (2.8)6.5% (6.5)8.7% (8.2)13.8% (13.8)
Engine, exhaust and emissions1.0% (1.2)2.4% (2.1)3.9% (3.2)5.7% (5.6)
Steering0.1% (0.2)0.2% (0.6)0.6% (1.6)2.0% (3.2)
Body, chassis and corrosion0.5% (0.9)1.1% (2.9)2.2% (5.5)4.9% (9.2)
Seat belts and airbags0.3% (0.6)0.7% (0.7)1.3% (1.2)2.3% (2.4)
Lights and electrics (wear)3.4% (5.6)6.3% (10.5)9.0% (16.6)15.3% (22.7)
Tyres (wear)5.9% (3.2)6.7% (5.1)7.1% (5.7)6.4% (6.6)
Wipers and windscreen (wear)4.6% (4.5)5.3% (5.9)5.3% (6.5)6.1% (7.9)
Other and plates (wear)0.2% (0.2)0.4% (0.2)0.3% (0.4)0.5% (0.5)

(…) = Class median, same age and mileage

Pre-purchase checklist for the mechanic

Built from the systems where this model fails more often than its class at 100,000 km and above, and from open recalls.

  1. Recalls: 5 serious recalls name this model — ask for proof the work was done
    • SR/02897/25 · 2002–2006 · If the front passenger airbag is deployed as a result of an accident, the gas generator housing may burst or components of the gas…
    • A12/00435/24 · 2011, 2012 · The battery may fail to work, resulting in a loss of power transmission without warning, creating a risk of fire and accidents (injuries).
    • A12/00568/23 · · The steering wheel airbag actuator can deteriorate over time. In the event of an accident, this may cause fragments of the front airbag to…
    • A12/01424/22 · · The airbag gas generator may be affected by chemical changes due to degradation over time due to heat cycling and exposure to moisture. In…
    • A12/01042/22 · 2019–2021 · The controllable coolant pump may have a leak between the coolant and vacuum circuit via negative pressure and allow coolant to enter it.…

    Check a specific car by its VIN on the official sites: NHTSA (US) · DVSA (UK)

Official recalls

Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.

  • EU Safety GateSerious2002–2006

    If the front passenger airbag is deployed as a result of an accident, the gas generator housing may burst or components of the gas generator housing may come loose and cause serious or fatal injuries to vehicle…

    Full text

    If the front passenger airbag is deployed as a result of an accident, the gas generator housing may burst or components of the gas generator housing may come loose and cause serious or fatal injuries to vehicle occupants.

    SR/02897/25 ↗
  • EU Safety Gate2023, 2024

    The steering wheel height adjustment may not be correctly fastened. In the case of a frontal crash, the fastening of the steering wheel height adjustment may not withstand the impact. This can have a negative impact on…

    Full text

    The steering wheel height adjustment may not be correctly fastened. In the case of a frontal crash, the fastening of the steering wheel height adjustment may not withstand the impact. This can have a negative impact on the severity of the driver's injuries in the event of an accident.

    SR/00601/25 ↗
  • EU Safety GateSerious2011, 2012

    The battery may fail to work, resulting in a loss of power transmission without warning, creating a risk of fire and accidents (injuries).

    A12/00435/24 ↗
  • EU Safety GateSerious

    The steering wheel airbag actuator can deteriorate over time. In the event of an accident, this may cause fragments of the front airbag to be released from the generator housing, increasing the risk of injury.

    A12/00568/23 ↗
  • EU Safety Gate2020–2022

    The drainage pipe for the fuel filter can rub against the underbody panel while driving. This can lead to diesel leakage, creating a risk of accidents, injuries.

    A12/00382/23 ↗
  • EU Safety GateSerious

    The airbag gas generator may be affected by chemical changes due to degradation over time due to heat cycling and exposure to moisture. In the event of a steering wheel airbag deployment, the excessive internal pressure…

    Full text

    The airbag gas generator may be affected by chemical changes due to degradation over time due to heat cycling and exposure to moisture. In the event of a steering wheel airbag deployment, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants.

    A12/01424/22 ↗
Show 41 more recalls
  • EU Safety GateSerious2019–2021

    The controllable coolant pump may have a leak between the coolant and vacuum circuit via negative pressure and allow coolant to enter it. If the electric switchover valves are exposed to coolant, a continuous increase…

    Full text

    The controllable coolant pump may have a leak between the coolant and vacuum circuit via negative pressure and allow coolant to enter it. If the electric switchover valves are exposed to coolant, a continuous increase in the component part temperature may occur and cause fire. In addition, the brake booster may become damaged over time and reduce brake performance that could lead to an accident.

    A12/01042/22 ↗
  • EU Safety Gate2005–2021

    A coding of a control unit may not match the individual vehicle equipment so that the affected control units may malfunction. As a result, some functions of the electronic stability program control unit may not be fully…

    Full text

    A coding of a control unit may not match the individual vehicle equipment so that the affected control units may malfunction. As a result, some functions of the electronic stability program control unit may not be fully available, thus changing the braking and control behavior, increasing the risk of an accident.

    A12/01072/22 ↗
  • EU Safety Gate2014–2020

    Incorrect image (frozen picture) information may be displayed by the rear view camera at low temperatures. As a result, the driver will not have an accurate and reliable view of the areas behind the vehicle on the…

    Full text

    Incorrect image (frozen picture) information may be displayed by the rear view camera at low temperatures. As a result, the driver will not have an accurate and reliable view of the areas behind the vehicle on the display screen when reversing, which could increase the risk of an accident

    A12/00872/22 ↗
  • EU Safety GateSerious2020, 2021

    The coolant pump, which is controlled via vacuum, may have a leak between the coolant and vacuum circuits so the coolant may enter the vacuum circuit. If the electric switchover valves are exposed to coolant, due to an…

    Full text

    The coolant pump, which is controlled via vacuum, may have a leak between the coolant and vacuum circuits so the coolant may enter the vacuum circuit. If the electric switchover valves are exposed to coolant, due to an electrochemical reaction, this can lead to a continuous increase in the temperature of the component part, which could cause fire.

    A12/00826/22 ↗
  • EU Safety GateSerious2021

    Due to a production fault, the functioning of the side airbags may be impaired.This will increase the risk of injury in the event of an accident.

    A12/01356/21 ↗
  • EU Safety Gate2018–2020

    The parameters of the gear recognition sensor may be incorrect.As a result, the reversing light may be deactivated inadvertently, increasing the risk of an accident.

    INFO/00154/21 ↗
  • EU Safety Gate2019

    Due to inadequate welding, the transverse control arm may break.As a result, the vehicle’s braking and steering capability may be impaired, increasing the risk of an accident.

    A12/01136/21 ↗
  • EU Safety Gate2013–2021

    The functioning of the emergency call system may in some cases be impaired. The communication module software will be updated on affected vehicles.

    INFO/00131/21 ↗
  • EU Safety Gate2019–2021

    Under certain conditions there may be a gear recognition malfunction, causing the reversing light to stop working.

    INFO/00127/21 ↗
  • EU Safety Gate2021

    A brake caliper bracket on the front axle is not sufficiently stable.This may lead to reduced service brake performance, increasing the risk of an accident.

    A12/00821/21 ↗
  • EU Safety Gate2020

    The bolted connection of the center support to the roof rail may become loose.As a result, the roof load could become detached while the vehicle is in motion or in the event of a crash, leading to increased risk of…

    Full text

    The bolted connection of the center support to the roof rail may become loose.As a result, the roof load could become detached while the vehicle is in motion or in the event of a crash, leading to increased risk of injury and posing a threat to other road users.

    A12/00774/21 ↗
  • EU Safety Gate2020

    The seat frame of the passenger seat may not have been welded correctly. This could increase the risk of injury in the event of an accident.

    A12/00480/21 ↗
  • EU Safety Gate2020

    The functioning of the belt tensioners may be impaired over the lifetime of the vehicle. This could increase the risk of injury in the event of an accident.

    A12/00442/21 ↗
  • EU Safety GateSerious2020

    The wading depth is incorrectly stated in the instructions for use. As a result, the vehicle could be used in inappropriate wading depth conditions, leading to electrical faults and increased risk of fire.

    A12/00410/21 ↗
  • EU Safety Gate2013–2015

    Incorrect mass values on the vehicle registration certificate may lead to overloading of the vehicle. As a result, the front and rear axles can be damaged.

    A12/01278/20 ↗
  • EU Safety Gate2020

    The left-hand side seat frame may not have been tightened with the required torque. This could lead to increased risk of injury in the event of an accident.

    A12/01121/20 ↗
  • EU Safety Gate2018, 2019

    The fuel return line may be damaged by contact with the underbody panelling. As a result, fuel may leak onto the road, posing a risk to the following traffic.

    A12/00838/20 ↗
  • EU Safety Gate2019, 2020

    Defective production of the passenger seat may lead to reduced seat strength.

    A12/00739/20 ↗
  • EU Safety Gate2019

    The headrests and headrest fixing rods in the rear of the vehicle may be defective.This will impair their protective function, increasing the risk of injury in the event of an accident.

    A12/00238/20 ↗
  • EU Safety Gate2019

    The head restraints may be defective. This may impair their protective function, increasing the risk of injury in the event of an accident.

    A12/00215/20 ↗
  • EU Safety Gate2019

    The upholstery of the headrests may become detached. This could increase the risk of injury in the event of an accident.

    A12/00095/19 ↗
  • EU Safety Gate2019

    A solenoid valve in the brake fluid circuit could jam. Consequently, brake fluid would outflow to the ABS storage chamber. This might impair the braking capacity of the vehicle, as well as the functioning of the ABS and…

    Full text

    A solenoid valve in the brake fluid circuit could jam. Consequently, brake fluid would outflow to the ABS storage chamber. This might impair the braking capacity of the vehicle, as well as the functioning of the ABS and ESP, increasing the risk of accident.

    A12/00013/19 ↗
  • EU Safety Gate2019

    The content of a labelling attached to the vehicle referencing its weight and dimensions is inaccurate. As a result, the vehicle could be overloaded, thereby limiting its stability and increasing the risk of an accident.

    A12/1851/19 ↗
  • EU Safety GateSerious2014–2019

    The coverings on the seat boxes with an integrated back-up battery may be missing. This will increase the risk of a short circuit or fire in case objects made of electroconductive (e.g. metal) materials are placed in…

    Full text

    The coverings on the seat boxes with an integrated back-up battery may be missing. This will increase the risk of a short circuit or fire in case objects made of electroconductive (e.g. metal) materials are placed in the seat boxes.

    A12/1752/19 ↗
  • EU Safety Gate2019

    The user's instruction manual might correspond to a different series and be incorrect or incomplete (in example, missing description of the Active Break Assist or absent warning against installation of rear-facing child…

    Full text

    The user's instruction manual might correspond to a different series and be incorrect or incomplete (in example, missing description of the Active Break Assist or absent warning against installation of rear-facing child seats in the front passenger seat). Consequently, the user could misuse the vehicle, which could lead the Active Break Assist to be incorrectly triggered or a rear-facing child seat to be installed in the front seat, increasing the risk of injuries.

    A12/1810/19 ↗
  • EU Safety GateSerious2018, 2019

    Due to incorrectly fitted brake pipes, brake fluid may leak out. This can result in increased stopping distance and to increased risk of fire due to brake fluid getting into contact with hot components.

    A12/1375/19 ↗
  • EU Safety Gate2019

    The screw connections of front swivel seat consoles could be defective. This may lead to an increased risk of injury in the event of an accident.

    A12/1304/19 ↗
  • EU Safety Gate2019

    The springs on the rear axle are inadequate for the vehicle type. This could lead to loss of control over the vehicle when it is fully loaded, increasing the risk of an accident.

    A12/1013/19 ↗
  • EU Safety GateSerious2019

    The passenger airbag cover on the instrument panel is inadequate. In the event of an accident, the airbag cover could break away, potentially fragmenting and causing injuries.

    A12/0629/19 ↗
  • EU Safety Gate2017, 2018

    There is a possibility of red rust corrosion on metallic components of the roof frame reinforcement and the connecting elements in the rear part of the roof bed. This could lead to weakening of the roof structure and…

    Full text

    There is a possibility of red rust corrosion on metallic components of the roof frame reinforcement and the connecting elements in the rear part of the roof bed. This could lead to weakening of the roof structure and thus of the overall stability of the body.

    A12/0609/19 ↗
  • EU Safety GateSerious2013–2018

    A faulty "Passenger Airbag Off" light could lead to a faulty passenger presence detector going unnoticed. In the event of an accident, this could increase the risk of injury for the passenger.

    A12/1288/18 ↗
  • EU Safety Gate2018

    Components are missing from the door handles. The doors could open in the event of a side collision.

    A12/0802/18 ↗
  • EU Safety GateSerious2014–2017

    The cabling under the front swivel seats can get caught causing damage to the cabling. This could result in the unintended deployment of the thorax airbag when the seat is rotated causing injuries to the occupant.

    A12/1874/17 ↗
  • EU Safety GateSerious2014–2017

    null The steering column is not sufficiently earthed. As a result, in the event of an electrostatic discharge, the driver's airbag may be triggered when not required. This could cause an accident.

    A12/1735/17 ↗
  • EU Safety Gate2017

    null The retaining rings of the wheel bearings on the front axle may not have been correctly locked into position. This may lead to a wheel being lost.

    A12/1621/17 ↗
  • EU Safety Gate2017

    null A section of one brake line may have a narrowed cross section. This could have an adverse effect on the brake dynamics and driving stability which could increase the risk of an accident.

    A12/1432/17 ↗
  • EU Safety Gate2014–2017

    null Missing welding points on the rear cross-bar may increase the risk of injury for passengers in the event of an accident.

    A12/1061/17 ↗
  • EU Safety GateSerious2016

    null The incorrect update of the control units may result in malfunctioning of the airbag control device, the Electronic Stability Programme or the distance control system.

    A12/0622/17 ↗
  • EU Safety GateSerious2014–2016

    null The connection between the high-pressure pipe from the fuel rail and the high-pressure pump may loosen. If fuel leaks onto the road as a result, it could increase the risk of accidents for following vehicles.

    A12/0648/16 ↗
  • EU Safety GateSerious2014, 2015

    null A cut-out in the vehicle floor may be missing meaning that the tail pipe of the warm-air auxiliary heating has not been fitted correctly. Exhaust gases from the auxiliary heating may consequently not be evacuated…

    Full text

    null A cut-out in the vehicle floor may be missing meaning that the tail pipe of the warm-air auxiliary heating has not been fitted correctly. Exhaust gases from the auxiliary heating may consequently not be evacuated correctly and might to some extent penetrate the vehicle interior leading to a risk of carbon monoxide poisoning of the passengers. There is also a risk of the underbody panelling catching fire.

    A12/0283/16 ↗
  • EU Safety Gate2014

    null The gasket seal for the engine's chain tensioner may display incorrect settling behaviour. Over time, this may result in the chain tensioner detaching from the threaded hole on the cylinder head and the leakage of…

    Full text

    null The gasket seal for the engine's chain tensioner may display incorrect settling behaviour. Over time, this may result in the chain tensioner detaching from the threaded hole on the cylinder head and the leakage of engine oil. The loss of large amounts of engine oil may contaminate the road, leading to a possible hazard for traffic following behind.

    A12/2169/14 ↗