AutoDefects
English

Vans

Peugeot Boxer reliability

In 53,525 UK MOT tests, 17.8% of Peugeot Boxer cars failed for a mechanical or structural defect. The median van of the same age and mileage: 21.0%.

82of 100High reliability15% fewer mechanical failures than the class
Best years
2010, 2011, 2013
Years with most failures
—
Weak spot at high mileage
Nothing stands out against the class
Official recalls
9 recalls, 3 serious
Mechanical failure rate
17.8%
Class median, same age and mileage
21.0%
First MOT (3 years old), 2021
6.3% (7.4%)
MOT tests
53,525
US owner complaints
0

MOT results by test year

The whole fleet of this model at each year’s MOT, against its class at the same age and mileage. Shows whether the model keeps its standing as it ages.

MOT yearTestsMechanical failClass medianAny fail
202453,52517.8%21.0%27.4%
202353,56316.9%20.3%26.1%

Failure rate by year of first registration

Mechanical failure rate at the 2024 MOT, by the year the car was first registered, against the median of its class at the same age and mileage.

This modelClass median
0%10%19%2004: 24.5%2004 Class median: 25.9%042005: 24.1%2005 Class median: 26.3%2006: 22.8%2006 Class median: 24.0%062007: 19.3%2007 Class median: 24.8%2008: 17.1%2008 Class median: 24.8%082009: 17.3%2009 Class median: 25.1%2010: 12.0%2010 Class median: 21.6%102011: 13.0%2011 Class median: 20.8%2012: 14.0%2012 Class median: 21.8%122013: 13.7%2013 Class median: 21.2%2014: 15.0%2014 Class median: 20.3%142015: 15.0%2015 Class median: 17.8%2016: 11.4%2016 Class median: 16.9%162017: 12.4%2017 Class median: 15.1%2018: 7.1%2018 Class median: 10.4%182019: 7.3%2019 Class median: 9.0%2020: 6.1%2020 Class median: 6.8%202021: 6.3%2021 Class median: 7.4%2022: 3.6%2022 Class median: 4.6%222023: 2.8%2023 Class median: 2.5%
YearTestsMechanical failClass medianAny failRecalls
20232512.8%2.5%11.2%1
20222223.6%4.6%11.3%1
20211,7036.3%7.4%15.1%2
20201,5216.1%6.8%15.5%1
20191,8327.3%9.0%17.0%2
20181,8987.1%10.4%14.3%1
20173,14412.4%15.1%19.8%1
20163,18011.4%16.9%19.7%1
20153,15015.0%17.8%23.1%2
20142,67615.0%20.3%24.8%2
20132,49613.7%21.2%22.8%1
20122,33814.0%21.8%22.4%1
20112,12213.0%20.8%21.6%1
20101,98512.0%21.6%20.3%1
20091,83417.3%25.1%28.5%1
20082,21917.1%24.8%26.8%1
20072,37419.3%24.8%31.3%0
20062,60422.8%24.0%33.4%0
20052,49024.1%26.3%35.2%0
20042,37124.5%25.9%36.1%0
Older years (10)
YearTestsMechanical failClass medianAny failRecalls
20031,98025.0%27.2%35.2%0
20021,56628.5%27.0%38.6%0
20011,28432.4%26.9%42.9%0
20001,30228.9%26.4%40.6%0
19991,24529.9%26.6%40.2%0
19981,15930.8%28.1%41.4%0
199798732.4%30.3%42.4%0
199671230.6%29.3%40.5%0
199581434.6%32.8%44.5%0
19945149.0%30.1%58.8%0

Most common MOT failures

The defects testers recorded most often on this model, in DVSA’s own wording (English), per 1,000 MOT tests.

Defect (DVSA wording)SystemPer 1,000 tests
Component mounting prescribed areas: prescribed area excessively corroded significantly reducing structural strengthSuspension and wheels69.6
Wipers: does not clear the windscreen effectivelyWipers and windscreen (wear)50.9
Integral vehicle structure condition: corroded to the extent that the rigidity of the assembly is significantly reducedBody, chassis and corrosion36.3
Position lamp: not workingLights and electrics (wear)28.6
Service brake performance: excessively bindingBrakes27
Headlamp aim: too lowLights and electrics (wear)23.4
Rbt (sp): efficiency below requirementsBrakes22.7
Stop lamp: not workingLights and electrics (wear)21.4
Horn: not workingLights and electrics (wear)18.5
Chassis condition: or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mountingBody, chassis and corrosion18
Headlamp aim: projected beam image is obviously incorrectLights and electrics (wear)17.1
Headlamp aim: too highLights and electrics (wear)17.1
Outline marker lamp: not workingLights and electrics (wear)16.9
Rear fog lamp: not workingLights and electrics (wear)16.8
Chassis condition: corroded to the extent that the rigidity of the assembly is significantly reducedBody, chassis and corrosion16.6

What fails, by mileage

Share of MOT tests that failed on each system. Wear items (bulbs, tyres, wipers, plates) are excluded from the reliability score.

System0-50k km50-100k km100-150k km150k+ km
Mechanical fail6.3% (10.0)17.2% (21.5)27.1% (28.3)30.4% (31.9)
Tests15,81019,8908,8698,956
Suspension and wheels1.4% (1.3)6.3% (4.7)12.5% (9.4)14.9% (16.2)
Brakes2.0% (2.8)7.9% (6.5)12.5% (8.2)15.2% (13.8)
Engine, exhaust and emissions1.1% (1.2)2.0% (2.1)3.6% (3.2)5.6% (5.6)
Steering0.3% (0.2)0.7% (0.6)1.6% (1.6)2.8% (3.2)
Body, chassis and corrosion0.9% (0.9)4.8% (2.9)8.9% (5.5)8.7% (9.2)
Seat belts and airbags1.5% (0.6)1.4% (0.7)2.2% (1.2)2.5% (2.4)
Lights and electrics (wear)7.3% (5.6)12.4% (10.5)17.5% (16.6)20.4% (22.7)
Tyres (wear)1.3% (3.2)2.3% (5.1)3.2% (5.7)3.5% (6.6)
Wipers and windscreen (wear)3.8% (4.5)5.8% (5.9)7.6% (6.5)6.5% (7.9)
Other and plates (wear)0.2% (0.2)0.2% (0.2)0.3% (0.4)0.5% (0.5)

(…) = Class median, same age and mileage

Pre-purchase checklist for the mechanic

Built from the systems where this model fails more often than its class at 100,000 km and above, and from open recalls.

  1. Recalls: 3 serious recalls name this model — ask for proof the work was done
    • SR/03073/26 · 2025, 2026 · On vehicles with a 2.2L diesel engine, insufficient tightening of the fuel pressure damper may create a gap in the assembly and cause…
    • SR/00548/26 · 2025 · There is an insufficient connection between the fuel return pipe and the valve which could lead to a fuel leak. The possibility of fuel…
    • A12/00243/24 · 2023 · Hydraulic oil may leak from the high-pressure line. This could lead to reduced steering assistance, requiring increased force to turn the…

    Check a specific car by its VIN on the official sites: NHTSA (US) · DVSA (UK)

Official recalls

Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.

  • EU Safety GateSerious2025, 2026

    On vehicles with a 2.2L diesel engine, insufficient tightening of the fuel pressure damper may create a gap in the assembly and cause diesel to leak from the fuel system. If the leaking fuel comes into contact with an…

    Full text

    On vehicles with a 2.2L diesel engine, insufficient tightening of the fuel pressure damper may create a gap in the assembly and cause diesel to leak from the fuel system. If the leaking fuel comes into contact with an ignition source, it could ignite and cause a fire.

    SR/03073/26 ↗
  • EU Safety Gate2024, 2025

    Due to a mistranslation of the configuration data between two production systems, the vehicle’s body control module (BCM) may not be correctly configured to detect indicator light failures. If an indicator bulb fails,…

    Full text

    Due to a mistranslation of the configuration data between two production systems, the vehicle’s body control module (BCM) may not be correctly configured to detect indicator light failures. If an indicator bulb fails, the BCM may not detect the fault and the warning signal may not illuminate, reducing communication with other road users and increasing the risk of an accident.

    SR/02028/26 ↗
  • EU Safety GateSerious2025

    There is an insufficient connection between the fuel return pipe and the valve which could lead to a fuel leak. The possibility of fuel coming into contact with hot parts cannot be ruled out, which could cause the…

    Full text

    There is an insufficient connection between the fuel return pipe and the valve which could lead to a fuel leak. The possibility of fuel coming into contact with hot parts cannot be ruled out, which could cause the vehicle to catch fire.

    SR/00548/26 ↗
  • EU Safety Gate1928–1957

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…

    Full text

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.

    SR/03153/25 ↗
  • EU Safety GateSerious2023

    Hydraulic oil may leak from the high-pressure line. This could lead to reduced steering assistance, requiring increased force to turn the steering wheel while driving. Moreover, leaking hydraulic oil could splash onto…

    Full text

    Hydraulic oil may leak from the high-pressure line. This could lead to reduced steering assistance, requiring increased force to turn the steering wheel while driving. Moreover, leaking hydraulic oil could splash onto the exhaust system, increasing the risk of fire.

    A12/00243/24 ↗
  • EU Safety Gate2008–2022

    A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.

    A12/01870/23 ↗
Show 3 more recalls
  • EU Safety Gate2021

    The limited functioning of one of the seat support braces increases the risk of injury in the event of an accident.

    A12/01556/21 ↗
  • EU Safety Gate2019

    The stub axles may be defective and could fracture. This will change the vehicle’s steering and driving characteristics, increasing the risk of an accident.

    A12/00528/21 ↗
  • EU Safety Gate2014, 2015

    null An error in the ignition locking system may cause failure of the various electrical systems and of the dashboard instruments which can lead to an accident.

    A12/0198/16 ↗