Peugeot Expert / Traveller reliability
In 55,456 UK MOT tests, 21.0% of Peugeot Expert / Traveller cars failed for a mechanical or structural defect. The median van of the same age and mileage: 21.7%.
- Best years
- 2019, 2020, 2021
- Years with most failures
- 2016
- Weak spot at high mileage
- Body, chassis and corrosion
- Official recalls
- 68 recalls, 22 serious
- Mechanical failure rate
- 21.0%
- Class median, same age and mileage
- 21.7%
- First MOT (3 years old), 2021
- 5.0% (7.9%)
- MOT tests
- 55,456
- US owner complaints
- 0
MOT results by test year
The whole fleet of this model at each year’s MOT, against its class at the same age and mileage. Shows whether the model keeps its standing as it ages.
| MOT year | Tests | Mechanical fail | Class median | Any fail |
|---|---|---|---|---|
| 2024 | 55,456 | 21.0% | 21.7% | 32.5% |
| 2023 | 54,080 | 22.1% | 22.1% | 34.1% |
Failure rate by year of first registration
Mechanical failure rate at the 2024 MOT, by the year the car was first registered, against the median of its class at the same age and mileage.
| Year | Tests | Mechanical fail | Class median | Any fail | Recalls |
|---|---|---|---|---|---|
| 2022 | 545 | 2.0% | 2.3% | 3.5% | 9 |
| 2021 | 5,121 | 5.0% | 7.9% | 15.0% | 8 |
| 2020 | 4,223 | 5.9% | 9.4% | 17.0% | 8 |
| 2019 | 6,527 | 7.7% | 11.9% | 19.3% | 13 |
| 2018 | 5,372 | 12.4% | 14.6% | 24.9% | 17 |
| 2017 | 4,742 | 15.1% | 18.5% | 26.3% | 19 |
| 2016 | 4,044 | 26.4% | 22.0% | 41.0% | 31 |
| 2015 | 4,844 | 24.9% | 23.5% | 35.7% | 16 |
| 2014 | 3,384 | 25.9% | 27.5% | 36.8% | 8 |
| 2013 | 1,985 | 33.5% | 30.7% | 47.1% | 7 |
| 2012 | 2,296 | 34.6% | 32.5% | 45.5% | 6 |
| 2011 | 2,307 | 33.1% | 33.1% | 47.1% | 5 |
| 2010 | 1,962 | 36.1% | 34.9% | 49.5% | 5 |
| 2009 | 1,684 | 37.3% | 35.9% | 48.7% | 4 |
| 2008 | 2,198 | 39.5% | 37.5% | 50.2% | 4 |
| 2007 | 1,894 | 39.3% | 36.9% | 49.5% | 0 |
| 2006 | 887 | 40.4% | 38.3% | 49.7% | 0 |
| 2005 | 592 | 40.5% | 40.6% | 50.0% | 0 |
| 2004 | 300 | 41.0% | 38.6% | 50.3% | 0 |
Most common MOT failures
The defects testers recorded most often on this model, in DVSA’s own wording (English), per 1,000 MOT tests.
What fails, by mileage
Share of MOT tests that failed on each system. Wear items (bulbs, tyres, wipers, plates) are excluded from the reliability score.
(…) = Class median, same age and mileage
Pre-purchase checklist for the mechanic
Built from the systems where this model fails more often than its class at 100,000 km and above, and from open recalls.
- Body and chassis: inspect sills, subframes, jacking points and the floor for corrosion and previous repairs.
- Recalls: 5 serious recalls name this model — ask for proof the work was done
- SR/01586/26 · 2025, 2026 · The starter body may contact the battery’s positive cable due to insufficient cable protection. This could cause an electric arc or short…
- SR/00360/26 · 2025 · Vehicles fitted with a DV5R engine may experience a fuel leak. The non-conformity of the round shape on the cone of the common rail may…
- SR/03915/25 · 2022–2051 · A hydrogen leak can occur between the tank’s outer cover and the protective lining. If the vehicle’s hydrogen sensors detect the leak while…
- A12/03244/24 · 2024 · Radio screens can be insufficiently fixed in place. In the event of an accident, the screen can come loose and cause injuries to the…
- A12/01790/24 · 2023, 2024 · The ground connections can come loose, which can result in the loss of several vehicle functions and lead to unintentional acceleration or…
Check a specific car by its VIN on the official sites: NHTSA (US) · DVSA (UK)
Official recalls
Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.
The starter body may contact the battery’s positive cable due to insufficient cable protection. This could cause an electric arc or short circuit, leading to smoke from the engine compartment and a fire.
SR/01586/26 ↗The DV5R engine may experience a loss of power due to slippage of the water pump pulley. This slippage can cause misalignment of the timing belt, potentially resulting in engine shutdown. The sprocket of the water pump…
SR/00970/26 ↗Full text
The DV5R engine may experience a loss of power due to slippage of the water pump pulley. This slippage can cause misalignment of the timing belt, potentially resulting in engine shutdown. The sprocket of the water pump pulley may detach from the shaft, which can lead to the loss of parts on the road and increase the risk of accidents and injuries.
Vehicles fitted with a DV5R engine may experience a fuel leak. The non-conformity of the round shape on the cone of the common rail may cause the nut to loosen, resulting in the possibility of fuel leaking between the…
SR/00360/26 ↗Full text
Vehicles fitted with a DV5R engine may experience a fuel leak. The non-conformity of the round shape on the cone of the common rail may cause the nut to loosen, resulting in the possibility of fuel leaking between the nut and the thread, leading to fuel vapours and fuel flow into the hot exhaust system. This may lead to a fire under the bonnet.
The vehicles equipped with the DW10F Euro 6.4 engine may have a defect in the system that monitors urea consumption. Because of this issue, the diagnostic test intended to detect problems such as low urea use or a…
SR/04162/25 ↗Full text
The vehicles equipped with the DW10F Euro 6.4 engine may have a defect in the system that monitors urea consumption. Because of this issue, the diagnostic test intended to detect problems such as low urea use or a blocked injector may not run often enough. This increases the risk that the emissions system will not be properly checked, which could lead the vehicle to fall short of the required emissions standards.
A hydrogen leak can occur between the tank’s outer cover and the protective lining. If the vehicle’s hydrogen sensors detect the leak while driving, the fuel-cell system will shut off. The vehicle will then only run in…
SR/03915/25 ↗Full text
A hydrogen leak can occur between the tank’s outer cover and the protective lining. If the vehicle’s hydrogen sensors detect the leak while driving, the fuel-cell system will shut off. The vehicle will then only run in electric (battery) mode, with a very limited range of about 30 km and no ability to recharge hydrogen on board.If the vehicle is parked, the hydrogen sensors do not operate. In this case, hydrogen could build up under the vehicle which increases the risk of hydrogen catching fire.
The rear brake discs do not have sufficient contact with the wheel hub, resulting in an abnormal concentration of stress on them. This might cause cracks and a reduced transmission of torque, resulting in the loosening…
SR/03546/25 ↗Full text
The rear brake discs do not have sufficient contact with the wheel hub, resulting in an abnormal concentration of stress on them. This might cause cracks and a reduced transmission of torque, resulting in the loosening of the wheel bolts, leading to an increased risk of a wheel becoming detached from the vehicle. Moreover, a crack that forms a groove in the surface of a brake disc might impair the braking function, increasing the risk of injuries.
Show 54 more recalls
The fixing bolts and the hinge on the vehicle’s front control arms may break due to corrosion. This can cause the vehicle to steer in an unpredictable way, increasing the risk of injuries.
SR/03233/25 ↗The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…
SR/03153/25 ↗Full text
The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.
The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started,…
SR/01450/25 ↗Full text
The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started, to an acceleration power's loss and to the engine suddenly cutting out while driving. This increases the risk of accidents and injuries.
The shock absorber attached to the body has been mounted with an insufficient tightening torque (measured value: 90 Nm). This can result in the attachment breaking and in a loss of the vehicle's control, increasing the…
SR/01285/25 ↗Full text
The shock absorber attached to the body has been mounted with an insufficient tightening torque (measured value: 90 Nm). This can result in the attachment breaking and in a loss of the vehicle's control, increasing the risk of accident and injuries.
An insufficiently resistant seat fixation on the first- and/or second row can lead to a seat movement in the event of an accident. This increases the risk of injuries to the occupants.
A12/03523/24 ↗Radio screens can be insufficiently fixed in place. In the event of an accident, the screen can come loose and cause injuries to the occupants and/or damage to the airbag when it is deployed.
A12/03244/24 ↗Incorrectly fitted rear axle suspension springs can lead to a loss of vehicle handling and the spring may come free from its support. The spring can fall onto the road whilst driving, posing a risk of accident and…
A12/02736/24 ↗Full text
Incorrectly fitted rear axle suspension springs can lead to a loss of vehicle handling and the spring may come free from its support. The spring can fall onto the road whilst driving, posing a risk of accident and injuries to the following traffic.
The ground connections can come loose, which can result in the loss of several vehicle functions and lead to unintentional acceleration or the vehicle catching fire.
A12/01790/24 ↗A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.
A12/01870/23 ↗AdBlue liquid injection may fall below adequate levels at extreme low temperatures (-15°C) when tank and fluid temperature are similarly low. Prolonged exposure to low temperatures may cause AdBlue to freeze, preventing…
A12/00224/23 ↗Full text
AdBlue liquid injection may fall below adequate levels at extreme low temperatures (-15°C) when tank and fluid temperature are similarly low. Prolonged exposure to low temperatures may cause AdBlue to freeze, preventing the system from heating it quickly enough, which may result in excessive emission levels. This poses a risk to the environment.
Due to the contact of the fuel line with the bodywork and plastic parts, there may be a possibility of a fuel leak at the rear of the vehicle. This could lead to loss of contact with the road or road users near the…
A12/01832/22 ↗Full text
Due to the contact of the fuel line with the bodywork and plastic parts, there may be a possibility of a fuel leak at the rear of the vehicle. This could lead to loss of contact with the road or road users near the vehicle could slip, increasing the risk of an accident.
The rear brake may be defective, leading to reduced service brake performance, increasing the risk of an accident.
A12/01314/22 ↗The high voltage wiring harness may be defective. This could result in an increased risk of fire.
A12/01307/22 ↗Steering box screws of the vehicle may have been improperly tightened, which can lead to a loss of steering control, increasing the risk of an accident.
A12/01223/22 ↗The notch locking mechanism of the headrest to the seat may be missing. As a result, the front headrests would not be locked and may eject in the event of a collision, increasing the risk of injury.
A12/00875/22 ↗Inadequate attachment of a wiring harness can lead to overheating of the rear window, increasing the risk of fire.
A12/00459/22 ↗The manufacturer's VIN (Vehicle Identification Number) label displays an incorrect weight. This may lead to an accident if more than the maximum allowable weight is towed.
A12/00411/22 ↗The centring pin for the rear suspension spring may not be properly welded. This could lead to the rear suspension spring being detached, increasing the risk of an accident. The product does not meet the requirements…
A12/01239/21 ↗Full text
The centring pin for the rear suspension spring may not be properly welded. This could lead to the rear suspension spring being detached, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of…
A12/01184/21 ↗Full text
The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The bolting of the front wheels may be incorrect. As a result, they may become detached whilst the car is being driven, increasing the risk of an accident.
A12/00303/21 ↗The bolting of the front wheels may be incorrect. As a result, they may become detached whilst the car is being driven, increasing the risk of an accident.
A12/00304/21 ↗The seat adjustment mechanism may not be fully operational.As a result, the seats could move in the event of an accident, increasing the risk of injury.
A12/00263/21 ↗The rear brake hoses may have been incorrectly attached and can become damaged. This will impair the braking performance, increasing the risk of an accident.
A12/01139/20 ↗The seat belts have not been attached correctly. This will impair their protective function, increasing the risk of injury in the event of an accident. In addition, incorrectly attached earth cables may cause the…
A12/01041/20 ↗Full text
The seat belts have not been attached correctly. This will impair their protective function, increasing the risk of injury in the event of an accident. In addition, incorrectly attached earth cables may cause the electronic stability program (ESP) to fail and can increase the risk of fire.
The bolts on the safety belts are not correctly screwed. This can impair the safety belts' restraining effect, increasing the risk of injury in the event of an accident.
A12/00874/20 ↗The front wheel arches may be inadequately sealed, allowing moisture to ingress.This can cause electronic components such as the airbags to malfunction.
A12/00875/20 ↗The rear brake callipers can be defective.This will impair the functioning of the parking brake, increasing the risk of an accident.
A12/00877/20 ↗The rear brake hoses may be attached incorrectly and can be damaged.This will impair the braking performance, increasing the risk of an accident.
A12/00855/20 ↗A fuel line may be defective.Consequently, it could leak fuel, which in the presence of an ignition source could lead to a fire or increase the risk of accident to following traffic.
A12/00635/20 ↗Water may leak into the vehicle's interior. Consequently, the proper functioning of the airbags can be impaired, increasing the risk of injury in the event of an accident.
A12/00380/20 ↗The seatbelt buckle of the front outer passenger seat can open inadvertently.This can impair the seatbelt's protective function in the event of an accident, increasing the risk of an injury. Additionally, the ball joint…
A12/00007/19 ↗Full text
The seatbelt buckle of the front outer passenger seat can open inadvertently.This can impair the seatbelt's protective function in the event of an accident, increasing the risk of an injury. Additionally, the ball joint of the wishbone may loosen up.This can impair the vehicle’s directional stability, increasing the risk of an accident.
Тhe seatbelt buckle of the front outer passenger seat can open inadvertently. This can impair the seatbelt's protective function in the event of an accident, increasing the risk of an injury.
A12/1691/19 ↗A plastic component (spacer) included in the exhaust line could damage the Diesel Particle Filter (DPF) under certain conditions, creating small cracks or holes. Depending on the amount of damage, the particulate…
A12/1593/19 ↗Full text
A plastic component (spacer) included in the exhaust line could damage the Diesel Particle Filter (DPF) under certain conditions, creating small cracks or holes. Depending on the amount of damage, the particulate emission level could exceed regulatory limits.
The support for the counterweight located beneath the rear floor may crack over time and break. As a result, the counterweight may become detached from the vehicle and fall off, posing a risk to the following traffic.
A12/1437/19 ↗Excessive loading of the front suspension could result in loosening and eventual separation of the front wishbone lower ball joints. This can impair the vehicle’s directional stability, increasing the risk of an…
A12/0582/19 ↗Full text
Excessive loading of the front suspension could result in loosening and eventual separation of the front wishbone lower ball joints. This can impair the vehicle’s directional stability, increasing the risk of an accident.
The vehicle’s air-conditioning compressor pulley could break and damage other components in the engine compartment. This may increase the risk of an accident.
A12/0570/19 ↗The fastening screws on the transverse link connection to the front wishbone axle could break. This can impair driving stability, increasing the risk of an accident.
A12/0573/19 ↗The fastening elements on the steering mechanism are inadequate. This may result in malfunctioning of the steering system, leading to an accident.
A12/0537/19 ↗The wishbone mounting brackets on the rear suspension system are incorrectly fixed and can break. This can lead to a loss of directional control, increasing the risk of an accident.
A12/0539/19 ↗The cylinder-housing oil gallery plug may not have been correctly tightened. As a consequence oil might leak which presents a skid hazard for following traffic.
A12/1364/18 ↗The van has an incorrect version of the engine's software, leading to errors in the cooling strategy and malfunction of the engine's "high temperature" warning system. This could lead to unnoticed overheating of the…
A12/1359/18 ↗Full text
The van has an incorrect version of the engine's software, leading to errors in the cooling strategy and malfunction of the engine's "high temperature" warning system. This could lead to unnoticed overheating of the engine, which may leak oil and also fail, increasing the risk of accident.
The tow hitch bracket can deform when it is placed under maximum pressure. This may affect the driving behaviour of the vehicle and/or the retention of the trailer, which could lead to accidents.
A12/1320/18 ↗A defect concerning a machined part of the engine could cause a loss of power. As a result the engine could stall or fail.
A12/0092/18 ↗The wiring of the connections for the safety belt pre-tensioners and the side-curtain airbags may be incorrect. In the event of an impact, these mechanisms could consequently be activated on the wrong side.
A12/1814/17 ↗null Because of the incorrect positioning of the power terminal on the starter during assembly, wear of the electric starter cable could occur which could lead to a short-circuit. As a result, it may be impossible to…
A12/1340/17 ↗Full text
null Because of the incorrect positioning of the power terminal on the starter during assembly, wear of the electric starter cable could occur which could lead to a short-circuit. As a result, it may be impossible to start the vehicle.
null The starter relay may be faulty, which could lead to inadvertent movement of the vehicle.
A12/1165/17 ↗null The brackets for the air conditioning compressor have not been assembled properly. As a result, the air conditioning compressor could fall on to the road endangering following vehicles.
A12/0988/17 ↗null A problem with a component of the gearbox actuator could prevent gear changing or cause the driver to change to the wrong gear. This could lead to the vehicle moving in the opposite direction to that intended by…
A12/0479/17 ↗Full text
null A problem with a component of the gearbox actuator could prevent gear changing or cause the driver to change to the wrong gear. This could lead to the vehicle moving in the opposite direction to that intended by the driver.
null Seals are missing on certain bodywork interfaces. As a consequence, water could enter the vehicle compartment and cause the airbag control box to malfunction which could lead to the unforeseen deployment of the…
A12/0471/17 ↗Full text
null Seals are missing on certain bodywork interfaces. As a consequence, water could enter the vehicle compartment and cause the airbag control box to malfunction which could lead to the unforeseen deployment of the airbag.
null The tightening torque of the brake servo to the pedal may be incorrect. This could lead to air getting into the brake servo, making the brake assist system less effective.
A12/0228/17 ↗null One or several wheel fixing nuts may have been incorrectly tightened on one or several wheels. This could lead to fractures appearing on the wheel and the possibility that the wheel could become detached while the…
A12/0230/17 ↗Full text
null One or several wheel fixing nuts may have been incorrectly tightened on one or several wheels. This could lead to fractures appearing on the wheel and the possibility that the wheel could become detached while the vehicle is in motion. If this were to happen, the driver could have difficulty controlling the vehicle.
null Possible incorrect positioning of a fuel pipe seal in the filler cap area could lead to loss of fuel when the tank is filled completely or in the event that the vehicle overturns.
A12/0207/17 ↗null Incorrect tightening of the fixings of the airbag housing and of the electrical chassis of the compartment harness could lead to malfunction of the airbags or to the engine stopping.
A12/0209/17 ↗null Some seals for the bodywork are missing. As a result, water could enter the passenger compartment and cause the airbag control module to malfunction, which could lead to the airbag being deployed unexpectedly.
A12/0211/17 ↗