AutoDefects
English

Peugeot Expert / Traveller 2021: reliability

36% fewer mechanical failures than the class

5,121 MOT tests of Peugeot Expert / Traveller cars first registered in 2021: 5.0% failed for a mechanical defect; the class median at the same age and mileage is 7.9%.

Mechanical failure rate
5.0%
Class median, same age and mileage
7.9%
Failed MOT (any reason)
15.0%
MOT tests
5,121
Recalls
8

What fails, by mileage

MileageTestsMechanical failClass median
0-50k km2,2242.7%4.8%
50-100k km2,0686.2%9.7%
100-150k km6417.3%11.6%
150k+ km18812.8%13.1%

What fails on this year

SystemMechanical fail
Suspension and wheels0.5%
Brakes3.0%
Engine, exhaust and emissions1.1%
Steering0.1%
Body, chassis and corrosion0.6%
Seat belts and airbags0.4%
Lights and electrics (wear)7.2%
Tyres (wear)2.3%
Wipers and windscreen (wear)4.6%
Other and plates (wear)0.1%

Official recalls

Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.

  • EU Safety Gate2020–2022

    The fixing bolts and the hinge on the vehicle’s front control arms may break due to corrosion. This can cause the vehicle to steer in an unpredictable way, increasing the risk of injuries.

    SR/03233/25 ↗
  • EU Safety Gate2008–2023

    The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started,…

    Full text

    The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started, to an acceleration power's loss and to the engine suddenly cutting out while driving. This increases the risk of accidents and injuries.

    SR/01450/25 ↗
  • EU Safety Gate2008–2022

    A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.

    A12/01870/23 ↗
  • EU Safety Gate2020, 2021

    AdBlue liquid injection may fall below adequate levels at extreme low temperatures (-15°C) when tank and fluid temperature are similarly low. Prolonged exposure to low temperatures may cause AdBlue to freeze, preventing…

    Full text

    AdBlue liquid injection may fall below adequate levels at extreme low temperatures (-15°C) when tank and fluid temperature are similarly low. Prolonged exposure to low temperatures may cause AdBlue to freeze, preventing the system from heating it quickly enough, which may result in excessive emission levels. This poses a risk to the environment.

    A12/00224/23 ↗
  • EU Safety GateSerious2020–2022

    Due to the contact of the fuel line with the bodywork and plastic parts, there may be a possibility of a fuel leak at the rear of the vehicle. This could lead to loss of contact with the road or road users near the…

    Full text

    Due to the contact of the fuel line with the bodywork and plastic parts, there may be a possibility of a fuel leak at the rear of the vehicle. This could lead to loss of contact with the road or road users near the vehicle could slip, increasing the risk of an accident.

    A12/01832/22 ↗
  • EU Safety Gate2021

    The notch locking mechanism of the headrest to the seat may be missing. As a result, the front headrests would not be locked and may eject in the event of a collision, increasing the risk of injury.

    A12/00875/22 ↗
Show 2 more recalls
  • EU Safety Gate2021

    The manufacturer's VIN (Vehicle Identification Number) label displays an incorrect weight. This may lead to an accident if more than the maximum allowable weight is towed.

    A12/00411/22 ↗
  • EU Safety Gate2021

    The centring pin for the rear suspension spring may not be properly welded. This could lead to the rear suspension spring being detached, increasing the risk of an accident. The product does not meet the requirements…

    Full text

    The centring pin for the rear suspension spring may not be properly welded. This could lead to the rear suspension spring being detached, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01239/21 ↗