Peugeot Expert / Traveller 2020: reliability
4,223 MOT tests of Peugeot Expert / Traveller cars first registered in 2020: 5.9% failed for a mechanical defect; the class median at the same age and mileage is 9.4%.
- Mechanical failure rate
- 5.9%
- Class median, same age and mileage
- 9.4%
- Failed MOT (any reason)
- 17.0%
- MOT tests
- 4,223
- Recalls
- 8
What fails, by mileage
| Mileage | Tests | Mechanical fail | Class median |
|---|---|---|---|
| 0-50k km | 1,181 | 3.4% | 4.2% |
| 50-100k km | 1,810 | 5.9% | 10.5% |
| 100-150k km | 891 | 7.9% | 12.2% |
| 150k+ km | 341 | 10.3% | 14.2% |
What fails on this year
Official recalls
Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.
The fixing bolts and the hinge on the vehicle’s front control arms may break due to corrosion. This can cause the vehicle to steer in an unpredictable way, increasing the risk of injuries.
SR/03233/25 ↗The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started,…
SR/01450/25 ↗Full text
The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started, to an acceleration power's loss and to the engine suddenly cutting out while driving. This increases the risk of accidents and injuries.
A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.
A12/01870/23 ↗AdBlue liquid injection may fall below adequate levels at extreme low temperatures (-15°C) when tank and fluid temperature are similarly low. Prolonged exposure to low temperatures may cause AdBlue to freeze, preventing…
A12/00224/23 ↗Full text
AdBlue liquid injection may fall below adequate levels at extreme low temperatures (-15°C) when tank and fluid temperature are similarly low. Prolonged exposure to low temperatures may cause AdBlue to freeze, preventing the system from heating it quickly enough, which may result in excessive emission levels. This poses a risk to the environment.
Due to the contact of the fuel line with the bodywork and plastic parts, there may be a possibility of a fuel leak at the rear of the vehicle. This could lead to loss of contact with the road or road users near the…
A12/01832/22 ↗Full text
Due to the contact of the fuel line with the bodywork and plastic parts, there may be a possibility of a fuel leak at the rear of the vehicle. This could lead to loss of contact with the road or road users near the vehicle could slip, increasing the risk of an accident.
The bolting of the front wheels may be incorrect. As a result, they may become detached whilst the car is being driven, increasing the risk of an accident.
A12/00303/21 ↗
Show 2 more recalls
The bolting of the front wheels may be incorrect. As a result, they may become detached whilst the car is being driven, increasing the risk of an accident.
A12/00304/21 ↗The seat adjustment mechanism may not be fully operational.As a result, the seats could move in the event of an accident, increasing the risk of injury.
A12/00263/21 ↗