Peugeot Expert / Traveller 2020: Zuverlässigkeit
4.223 MOT-Prüfungen von Peugeot Expert / Traveller mit Erstzulassung 2020: 5,9% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 9,4%.
- Technische Mängelquote
- 5,9%
- Klassenmedian, gleiches Alter und gleiche Laufleistung
- 9,4%
- Durchgefallen (jeder Grund)
- 17,0%
- MOT-Prüfungen
- 4.223
- Rückrufe
- 8
Was nach Laufleistung ausfällt
| Laufleistung | Prüfungen | Technische Mängel | Klassenmedian |
|---|---|---|---|
| 0-50k km | 1.181 | 3,4% | 4,2% |
| 50-100k km | 1.810 | 5,9% | 10,5% |
| 100-150k km | 891 | 7,9% | 12,2% |
| 150k+ km | 341 | 10,3% | 14,2% |
Was bei diesem Baujahr ausfällt
Amtliche Rückrufe
Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.
The fixing bolts and the hinge on the vehicle’s front control arms may break due to corrosion. This can cause the vehicle to steer in an unpredictable way, increasing the risk of injuries.
SR/03233/25 ↗The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started,…
SR/01450/25 ↗Volltext
The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started, to an acceleration power's loss and to the engine suddenly cutting out while driving. This increases the risk of accidents and injuries.
A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.
A12/01870/23 ↗AdBlue liquid injection may fall below adequate levels at extreme low temperatures (-15°C) when tank and fluid temperature are similarly low. Prolonged exposure to low temperatures may cause AdBlue to freeze, preventing…
A12/00224/23 ↗Volltext
AdBlue liquid injection may fall below adequate levels at extreme low temperatures (-15°C) when tank and fluid temperature are similarly low. Prolonged exposure to low temperatures may cause AdBlue to freeze, preventing the system from heating it quickly enough, which may result in excessive emission levels. This poses a risk to the environment.
Due to the contact of the fuel line with the bodywork and plastic parts, there may be a possibility of a fuel leak at the rear of the vehicle. This could lead to loss of contact with the road or road users near the…
A12/01832/22 ↗Volltext
Due to the contact of the fuel line with the bodywork and plastic parts, there may be a possibility of a fuel leak at the rear of the vehicle. This could lead to loss of contact with the road or road users near the vehicle could slip, increasing the risk of an accident.
The bolting of the front wheels may be incorrect. As a result, they may become detached whilst the car is being driven, increasing the risk of an accident.
A12/00303/21 ↗
2 weitere Rückrufe anzeigen
The bolting of the front wheels may be incorrect. As a result, they may become detached whilst the car is being driven, increasing the risk of an accident.
A12/00304/21 ↗The seat adjustment mechanism may not be fully operational.As a result, the seats could move in the event of an accident, increasing the risk of injury.
A12/00263/21 ↗