Peugeot Expert / Traveller 2020: надійність
4 223 техоглядів Peugeot Expert / Traveller першої реєстрації 2020 року: 5,9% не пройшли через механічний дефект; медіана класу того ж віку й пробігу — 9,4%.
- Відмови через механіку
- 5,9%
- Медіана класу, той самий вік і пробіг
- 9,4%
- Не пройшли MOT (будь-яка причина)
- 17,0%
- техоглядів MOT
- 4 223
- Відкликання
- 8
Що ламається залежно від пробігу
| Пробіг | Техогляди | Механічні відмови | Медіана класу |
|---|---|---|---|
| 0-50k km | 1 181 | 3,4% | 4,2% |
| 50-100k km | 1 810 | 5,9% | 10,5% |
| 100-150k km | 891 | 7,9% | 12,2% |
| 150k+ km | 341 | 10,3% | 14,2% |
Що ламається в цьому році випуску
Офіційні відкликання
Відкликання, опубліковані NHTSA (США) та EU Safety Gate, у яких названо цю модель. Чи стосується це конкретного авто, перевіряйте за VIN.
The fixing bolts and the hinge on the vehicle’s front control arms may break due to corrosion. This can cause the vehicle to steer in an unpredictable way, increasing the risk of injuries.
SR/03233/25 ↗The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started,…
SR/01450/25 ↗Повний текст
The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started, to an acceleration power's loss and to the engine suddenly cutting out while driving. This increases the risk of accidents and injuries.
A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.
A12/01870/23 ↗AdBlue liquid injection may fall below adequate levels at extreme low temperatures (-15°C) when tank and fluid temperature are similarly low. Prolonged exposure to low temperatures may cause AdBlue to freeze, preventing…
A12/00224/23 ↗Повний текст
AdBlue liquid injection may fall below adequate levels at extreme low temperatures (-15°C) when tank and fluid temperature are similarly low. Prolonged exposure to low temperatures may cause AdBlue to freeze, preventing the system from heating it quickly enough, which may result in excessive emission levels. This poses a risk to the environment.
Due to the contact of the fuel line with the bodywork and plastic parts, there may be a possibility of a fuel leak at the rear of the vehicle. This could lead to loss of contact with the road or road users near the…
A12/01832/22 ↗Повний текст
Due to the contact of the fuel line with the bodywork and plastic parts, there may be a possibility of a fuel leak at the rear of the vehicle. This could lead to loss of contact with the road or road users near the vehicle could slip, increasing the risk of an accident.
The bolting of the front wheels may be incorrect. As a result, they may become detached whilst the car is being driven, increasing the risk of an accident.
A12/00303/21 ↗
Показати ще 2 відкликань
The bolting of the front wheels may be incorrect. As a result, they may become detached whilst the car is being driven, increasing the risk of an accident.
A12/00304/21 ↗The seat adjustment mechanism may not be fully operational.As a result, the seats could move in the event of an accident, increasing the risk of injury.
A12/00263/21 ↗