AutoDefects
Français

Peugeot Expert / Traveller 2021 : fiabilité

36 % de défaillances mécaniques en moins que la catégorie

5 121 contrôles MOT de Peugeot Expert / Traveller immatriculées pour la première fois en 2021 : 5,0 % recalées pour un défaut mécanique ; la médiane de la catégorie au même âge et kilométrage est de 7,9 %.

Taux de défaillance mécanique
5,0%
Médiane de la catégorie, même âge et kilométrage
7,9%
Recalés (toute raison)
15,0%
contrôles MOT
5 121
Rappels
8

Ce qui lâche selon le kilométrage

KilométrageContrôlesDéfaillance mécaniqueMédiane catégorie
0-50k km2 2242,7%4,8%
50-100k km2 0686,2%9,7%
100-150k km6417,3%11,6%
150k+ km18812,8%13,1%

Ce qui lâche sur cette année

OrganeDéfaillance mécanique
Suspension et roues0,5%
Freins3,0%
Moteur, échappement et émissions1,1%
Direction0,1%
Carrosserie, châssis et corrosion0,6%
Ceintures et airbags0,4%
Éclairage et électricité (usure)7,2%
Pneus (usure)2,3%
Essuie-glaces et pare-brise (usure)4,6%
Divers et plaques (usure)0,1%

Rappels officiels

Rappels publiés par la NHTSA (États-Unis) et l’EU Safety Gate qui citent ce modèle. Vérifiez par VIN si une voiture précise est concernée.

  • EU Safety Gate2020–2022

    The fixing bolts and the hinge on the vehicle’s front control arms may break due to corrosion. This can cause the vehicle to steer in an unpredictable way, increasing the risk of injuries.

    SR/03233/25 ↗
  • EU Safety Gate2008–2023

    The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started,…

    Texte complet

    The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started, to an acceleration power's loss and to the engine suddenly cutting out while driving. This increases the risk of accidents and injuries.

    SR/01450/25 ↗
  • EU Safety Gate2008–2022

    A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.

    A12/01870/23 ↗
  • EU Safety Gate2020, 2021

    AdBlue liquid injection may fall below adequate levels at extreme low temperatures (-15°C) when tank and fluid temperature are similarly low. Prolonged exposure to low temperatures may cause AdBlue to freeze, preventing…

    Texte complet

    AdBlue liquid injection may fall below adequate levels at extreme low temperatures (-15°C) when tank and fluid temperature are similarly low. Prolonged exposure to low temperatures may cause AdBlue to freeze, preventing the system from heating it quickly enough, which may result in excessive emission levels. This poses a risk to the environment.

    A12/00224/23 ↗
  • EU Safety GateGrave2020–2022

    Due to the contact of the fuel line with the bodywork and plastic parts, there may be a possibility of a fuel leak at the rear of the vehicle. This could lead to loss of contact with the road or road users near the…

    Texte complet

    Due to the contact of the fuel line with the bodywork and plastic parts, there may be a possibility of a fuel leak at the rear of the vehicle. This could lead to loss of contact with the road or road users near the vehicle could slip, increasing the risk of an accident.

    A12/01832/22 ↗
  • EU Safety Gate2021

    The notch locking mechanism of the headrest to the seat may be missing. As a result, the front headrests would not be locked and may eject in the event of a collision, increasing the risk of injury.

    A12/00875/22 ↗
Afficher 2 rappels de plus
  • EU Safety Gate2021

    The manufacturer's VIN (Vehicle Identification Number) label displays an incorrect weight. This may lead to an accident if more than the maximum allowable weight is towed.

    A12/00411/22 ↗
  • EU Safety Gate2021

    The centring pin for the rear suspension spring may not be properly welded. This could lead to the rear suspension spring being detached, increasing the risk of an accident. The product does not meet the requirements…

    Texte complet

    The centring pin for the rear suspension spring may not be properly welded. This could lead to the rear suspension spring being detached, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01239/21 ↗