AutoDefects
Español

Peugeot Expert / Traveller 2021: fiabilidad

36 % menos fallos mecánicos que su clase

5121 inspecciones MOT de Peugeot Expert / Traveller matriculados por primera vez en 2021: el 5,0 % no pasó por un defecto mecánico; la mediana de su clase con la misma edad y kilometraje es del 7,9 %.

Tasa de fallo mecánico
5,0%
Mediana de la clase, misma edad y kilometraje
7,9%
No pasó la MOT (cualquier motivo)
15,0%
inspecciones MOT
5121
Llamadas a revisión
8

Qué falla según el kilometraje

KilometrajeInspeccionesFallo mecánicoMediana de la clase
0-50k km22242,7%4,8%
50-100k km20686,2%9,7%
100-150k km6417,3%11,6%
150k+ km18812,8%13,1%

Qué falla en este año

SistemaFallo mecánico
Suspensión y ruedas0,5%
Frenos3,0%
Motor, escape y emisiones1,1%
Dirección0,1%
Carrocería, bastidor y corrosión0,6%
Cinturones y airbags0,4%
Luces y electricidad (desgaste)7,2%
Neumáticos (desgaste)2,3%
Escobillas y parabrisas (desgaste)4,6%
Otros y matrículas (desgaste)0,1%

Llamadas a revisión oficiales

Campañas publicadas por la NHTSA (EE. UU.) y el EU Safety Gate que citan este modelo. Comprueba por VIN si afecta a un coche concreto.

  • EU Safety Gate2020–2022

    The fixing bolts and the hinge on the vehicle’s front control arms may break due to corrosion. This can cause the vehicle to steer in an unpredictable way, increasing the risk of injuries.

    SR/03233/25 ↗
  • EU Safety Gate2008–2023

    The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started,…

    Texto completo

    The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started, to an acceleration power's loss and to the engine suddenly cutting out while driving. This increases the risk of accidents and injuries.

    SR/01450/25 ↗
  • EU Safety Gate2008–2022

    A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.

    A12/01870/23 ↗
  • EU Safety Gate2020, 2021

    AdBlue liquid injection may fall below adequate levels at extreme low temperatures (-15°C) when tank and fluid temperature are similarly low. Prolonged exposure to low temperatures may cause AdBlue to freeze, preventing…

    Texto completo

    AdBlue liquid injection may fall below adequate levels at extreme low temperatures (-15°C) when tank and fluid temperature are similarly low. Prolonged exposure to low temperatures may cause AdBlue to freeze, preventing the system from heating it quickly enough, which may result in excessive emission levels. This poses a risk to the environment.

    A12/00224/23 ↗
  • EU Safety GateGrave2020–2022

    Due to the contact of the fuel line with the bodywork and plastic parts, there may be a possibility of a fuel leak at the rear of the vehicle. This could lead to loss of contact with the road or road users near the…

    Texto completo

    Due to the contact of the fuel line with the bodywork and plastic parts, there may be a possibility of a fuel leak at the rear of the vehicle. This could lead to loss of contact with the road or road users near the vehicle could slip, increasing the risk of an accident.

    A12/01832/22 ↗
  • EU Safety Gate2021

    The notch locking mechanism of the headrest to the seat may be missing. As a result, the front headrests would not be locked and may eject in the event of a collision, increasing the risk of injury.

    A12/00875/22 ↗
Mostrar 2 llamadas más
  • EU Safety Gate2021

    The manufacturer's VIN (Vehicle Identification Number) label displays an incorrect weight. This may lead to an accident if more than the maximum allowable weight is towed.

    A12/00411/22 ↗
  • EU Safety Gate2021

    The centring pin for the rear suspension spring may not be properly welded. This could lead to the rear suspension spring being detached, increasing the risk of an accident. The product does not meet the requirements…

    Texto completo

    The centring pin for the rear suspension spring may not be properly welded. This could lead to the rear suspension spring being detached, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01239/21 ↗