Peugeot Expert / Traveller 2021: niezawodność
5121 badań MOT egzemplarzy Peugeot Expert / Traveller zarejestrowanych po raz pierwszy w 2021: 5,0% nie przeszło z powodu usterki mechanicznej; mediana klasy w tym samym wieku i z tym samym przebiegiem to 7,9%.
- Usterki mechaniczne
- 5,0%
- Mediana klasy, ten sam wiek i przebieg
- 7,9%
- Negatywne badanie (dowolny powód)
- 15,0%
- badań MOT
- 5121
- Akcje przywoławcze
- 8
Co się psuje w zależności od przebiegu
| Przebieg | Badania | Usterki mechaniczne | Mediana klasy |
|---|---|---|---|
| 0-50k km | 2224 | 2,7% | 4,8% |
| 50-100k km | 2068 | 6,2% | 9,7% |
| 100-150k km | 641 | 7,3% | 11,6% |
| 150k+ km | 188 | 12,8% | 13,1% |
Co się psuje w tym roczniku
Oficjalne akcje przywoławcze
Akcje opublikowane przez NHTSA (USA) i EU Safety Gate, w których wymieniono ten model. Czy dotyczą konkretnego auta, sprawdź po VIN.
The fixing bolts and the hinge on the vehicle’s front control arms may break due to corrosion. This can cause the vehicle to steer in an unpredictable way, increasing the risk of injuries.
SR/03233/25 ↗The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started,…
SR/01450/25 ↗Pełny tekst
The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started, to an acceleration power's loss and to the engine suddenly cutting out while driving. This increases the risk of accidents and injuries.
A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.
A12/01870/23 ↗AdBlue liquid injection may fall below adequate levels at extreme low temperatures (-15°C) when tank and fluid temperature are similarly low. Prolonged exposure to low temperatures may cause AdBlue to freeze, preventing…
A12/00224/23 ↗Pełny tekst
AdBlue liquid injection may fall below adequate levels at extreme low temperatures (-15°C) when tank and fluid temperature are similarly low. Prolonged exposure to low temperatures may cause AdBlue to freeze, preventing the system from heating it quickly enough, which may result in excessive emission levels. This poses a risk to the environment.
Due to the contact of the fuel line with the bodywork and plastic parts, there may be a possibility of a fuel leak at the rear of the vehicle. This could lead to loss of contact with the road or road users near the…
A12/01832/22 ↗Pełny tekst
Due to the contact of the fuel line with the bodywork and plastic parts, there may be a possibility of a fuel leak at the rear of the vehicle. This could lead to loss of contact with the road or road users near the vehicle could slip, increasing the risk of an accident.
The notch locking mechanism of the headrest to the seat may be missing. As a result, the front headrests would not be locked and may eject in the event of a collision, increasing the risk of injury.
A12/00875/22 ↗
Pokaż jeszcze 2 akcji
The manufacturer's VIN (Vehicle Identification Number) label displays an incorrect weight. This may lead to an accident if more than the maximum allowable weight is towed.
A12/00411/22 ↗The centring pin for the rear suspension spring may not be properly welded. This could lead to the rear suspension spring being detached, increasing the risk of an accident. The product does not meet the requirements…
A12/01239/21 ↗Pełny tekst
The centring pin for the rear suspension spring may not be properly welded. This could lead to the rear suspension spring being detached, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.