Peugeot Expert / Traveller 2016: niezawodność
4044 badań MOT egzemplarzy Peugeot Expert / Traveller zarejestrowanych po raz pierwszy w 2016: 26,4% nie przeszło z powodu usterki mechanicznej; mediana klasy w tym samym wieku i z tym samym przebiegiem to 22,0%.
- Usterki mechaniczne
- 26,4%
- Mediana klasy, ten sam wiek i przebieg
- 22,0%
- Negatywne badanie (dowolny powód)
- 41,0%
- badań MOT
- 4044
- Akcje przywoławcze
- 31
Co się psuje w zależności od przebiegu
| Przebieg | Badania | Usterki mechaniczne | Mediana klasy |
|---|---|---|---|
| 0-50k km | 172 | 11,6% | 10,1% |
| 50-100k km | 909 | 18,0% | 17,6% |
| 100-150k km | 1260 | 26,2% | 21,8% |
| 150k+ km | 1703 | 32,5% | 25,7% |
Co się psuje w tym roczniku
Oficjalne akcje przywoławcze
Akcje opublikowane przez NHTSA (USA) i EU Safety Gate, w których wymieniono ten model. Czy dotyczą konkretnego auta, sprawdź po VIN.
The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started,…
SR/01450/25 ↗Pełny tekst
The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started, to an acceleration power's loss and to the engine suddenly cutting out while driving. This increases the risk of accidents and injuries.
A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.
A12/01870/23 ↗Inadequate attachment of a wiring harness can lead to overheating of the rear window, increasing the risk of fire.
A12/00459/22 ↗The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of…
A12/01184/21 ↗Pełny tekst
The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The rear brake hoses may have been incorrectly attached and can become damaged. This will impair the braking performance, increasing the risk of an accident.
A12/01139/20 ↗The rear brake hoses may be attached incorrectly and can be damaged.This will impair the braking performance, increasing the risk of an accident.
A12/00855/20 ↗
Pokaż jeszcze 9 akcji
A fuel line may be defective.Consequently, it could leak fuel, which in the presence of an ignition source could lead to a fire or increase the risk of accident to following traffic.
A12/00635/20 ↗The seatbelt buckle of the front outer passenger seat can open inadvertently.This can impair the seatbelt's protective function in the event of an accident, increasing the risk of an injury. Additionally, the ball joint…
A12/00007/19 ↗Pełny tekst
The seatbelt buckle of the front outer passenger seat can open inadvertently.This can impair the seatbelt's protective function in the event of an accident, increasing the risk of an injury. Additionally, the ball joint of the wishbone may loosen up.This can impair the vehicle’s directional stability, increasing the risk of an accident.
Тhe seatbelt buckle of the front outer passenger seat can open inadvertently. This can impair the seatbelt's protective function in the event of an accident, increasing the risk of an injury.
A12/1691/19 ↗The support for the counterweight located beneath the rear floor may crack over time and break. As a result, the counterweight may become detached from the vehicle and fall off, posing a risk to the following traffic.
A12/1437/19 ↗Excessive loading of the front suspension could result in loosening and eventual separation of the front wishbone lower ball joints. This can impair the vehicle’s directional stability, increasing the risk of an…
A12/0582/19 ↗Pełny tekst
Excessive loading of the front suspension could result in loosening and eventual separation of the front wishbone lower ball joints. This can impair the vehicle’s directional stability, increasing the risk of an accident.
The vehicle’s air-conditioning compressor pulley could break and damage other components in the engine compartment. This may increase the risk of an accident.
A12/0570/19 ↗The fastening screws on the transverse link connection to the front wishbone axle could break. This can impair driving stability, increasing the risk of an accident.
A12/0573/19 ↗The fastening elements on the steering mechanism are inadequate. This may result in malfunctioning of the steering system, leading to an accident.
A12/0537/19 ↗The wishbone mounting brackets on the rear suspension system are incorrectly fixed and can break. This can lead to a loss of directional control, increasing the risk of an accident.
A12/0539/19 ↗