AutoDefects
Español

Peugeot Expert / Traveller 2015: fiabilidad

6 % más fallos mecánicos que su clase

4844 inspecciones MOT de Peugeot Expert / Traveller matriculados por primera vez en 2015: el 24,9 % no pasó por un defecto mecánico; la mediana de su clase con la misma edad y kilometraje es del 23,5 %.

Tasa de fallo mecánico
24,9%
Mediana de la clase, misma edad y kilometraje
23,5%
No pasó la MOT (cualquier motivo)
35,7%
inspecciones MOT
4844
Llamadas a revisión
16

Qué falla según el kilometraje

KilometrajeInspeccionesFallo mecánicoMediana de la clase
0-50k km1309,2%9,8%
50-100k km125115,4%15,5%
100-150k km135225,2%24,6%
150k+ km211131,4%28,3%

Qué falla en este año

SistemaFallo mecánico
Suspensión y ruedas9,4%
Frenos7,2%
Motor, escape y emisiones3,2%
Dirección1,6%
Carrocería, bastidor y corrosión14,8%
Cinturones y airbags0,6%
Luces y electricidad (desgaste)19,8%
Neumáticos (desgaste)5,8%
Escobillas y parabrisas (desgaste)6,5%
Otros y matrículas (desgaste)0,3%

Llamadas a revisión oficiales

Campañas publicadas por la NHTSA (EE. UU.) y el EU Safety Gate que citan este modelo. Comprueba por VIN si afecta a un coche concreto.

  • EU Safety Gate2008–2023

    The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started,…

    Texto completo

    The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started, to an acceleration power's loss and to the engine suddenly cutting out while driving. This increases the risk of accidents and injuries.

    SR/01450/25 ↗
  • EU Safety Gate2008–2022

    A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.

    A12/01870/23 ↗
  • EU Safety GateGrave2015, 2016

    Inadequate attachment of a wiring harness can lead to overheating of the rear window, increasing the risk of fire.

    A12/00459/22 ↗
  • EU Safety Gate2008–2018

    The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of…

    Texto completo

    The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01184/21 ↗
  • EU Safety GateGrave2015–2019

    The seatbelt buckle of the front outer passenger seat can open inadvertently.This can impair the seatbelt's protective function in the event of an accident, increasing the risk of an injury. Additionally, the ball joint…

    Texto completo

    The seatbelt buckle of the front outer passenger seat can open inadvertently.This can impair the seatbelt's protective function in the event of an accident, increasing the risk of an injury. Additionally, the ball joint of the wishbone may loosen up.This can impair the vehicle’s directional stability, increasing the risk of an accident.

    A12/00007/19 ↗
  • EU Safety GateGrave2015–2019

    Тhe seatbelt buckle of the front outer passenger seat can open inadvertently. This can impair the seatbelt's protective function in the event of an accident, increasing the risk of an injury.

    A12/1691/19 ↗
Mostrar 9 llamadas más
  • EU Safety Gate2014–2016

    The support for the counterweight located beneath the rear floor may crack over time and break. As a result, the counterweight may become detached from the vehicle and fall off, posing a risk to the following traffic.

    A12/1437/19 ↗
  • EU Safety Gate2015–2018

    Excessive loading of the front suspension could result in loosening and eventual separation of the front wishbone lower ball joints. This can impair the vehicle’s directional stability, increasing the risk of an…

    Texto completo

    Excessive loading of the front suspension could result in loosening and eventual separation of the front wishbone lower ball joints. This can impair the vehicle’s directional stability, increasing the risk of an accident.

    A12/0582/19 ↗
  • EU Safety Gate2015–2018

    The vehicle’s air-conditioning compressor pulley could break and damage other components in the engine compartment. This may increase the risk of an accident.

    A12/0570/19 ↗
  • EU Safety Gate2015–2018

    The fastening screws on the transverse link connection to the front wishbone axle could break. This can impair driving stability, increasing the risk of an accident.

    A12/0573/19 ↗
  • EU Safety Gate2015–2018

    The fastening elements on the steering mechanism are inadequate. This may result in malfunctioning of the steering system, leading to an accident.

    A12/0537/19 ↗
  • EU Safety Gate2015–2018

    The wishbone mounting brackets on the rear suspension system are incorrectly fixed and can break. This can lead to a loss of directional control, increasing the risk of an accident.

    A12/0539/19 ↗
  • EU Safety Gate2015, 2016

    null Because of the incorrect positioning of the power terminal on the starter during assembly, wear of the electric starter cable could occur which could lead to a short-circuit. As a result, it may be impossible to…

    Texto completo

    null Because of the incorrect positioning of the power terminal on the starter during assembly, wear of the electric starter cable could occur which could lead to a short-circuit. As a result, it may be impossible to start the vehicle.

    A12/1340/17 ↗
  • EU Safety Gate2008–2016

    null A problem with a component of the gearbox actuator could prevent gear changing or cause the driver to change to the wrong gear. This could lead to the vehicle moving in the opposite direction to that intended by…

    Texto completo

    null A problem with a component of the gearbox actuator could prevent gear changing or cause the driver to change to the wrong gear. This could lead to the vehicle moving in the opposite direction to that intended by the driver.

    A12/0479/17 ↗
  • EU Safety Gate2013–2016

    null Possible incorrect positioning of a fuel pipe seal in the filler cap area could lead to loss of fuel when the tank is filled completely or in the event that the vehicle overturns.

    A12/0207/17 ↗