AutoDefects
English

Vans

Volkswagen Caddy reliability

In 148,370 UK MOT tests, 21.5% of Volkswagen Caddy cars failed for a mechanical or structural defect. The median van of the same age and mileage: 26.0%.

85of 100High reliability17% fewer mechanical failures than the class
Best years
2012, 2016, 2021
Years with most failures
—
Weak spot at high mileage
Nothing stands out against the class
Official recalls
16 recalls, 6 serious
Mechanical failure rate
21.5%
Class median, same age and mileage
26.0%
First MOT (3 years old), 2021
6.3% (8.3%)
MOT tests
148,370
US owner complaints
0

MOT results by test year

The whole fleet of this model at each year’s MOT, against its class at the same age and mileage. Shows whether the model keeps its standing as it ages.

MOT yearTestsMechanical failClass medianAny fail
2024148,37021.5%26.0%31.5%
2023147,78120.6%25.3%31.4%

Failure rate by year of first registration

Mechanical failure rate at the 2024 MOT, by the year the car was first registered, against the median of its class at the same age and mileage.

This modelClass median
0%15%31%2004: 34.3%2004 Class median: 39.8%042005: 34.6%2005 Class median: 41.9%2006: 34.1%2006 Class median: 40.1%062007: 32.5%2007 Class median: 37.8%2008: 30.9%2008 Class median: 38.3%082009: 31.4%2009 Class median: 36.9%2010: 31.7%2010 Class median: 35.9%102011: 27.6%2011 Class median: 34.4%2012: 26.6%2012 Class median: 33.7%122013: 24.8%2013 Class median: 30.8%2014: 22.9%2014 Class median: 28.5%142015: 19.9%2015 Class median: 24.4%2016: 17.3%2016 Class median: 22.1%162017: 15.9%2017 Class median: 18.0%2018: 11.7%2018 Class median: 14.0%182019: 10.6%2019 Class median: 12.0%2020: 7.9%2020 Class median: 9.3%202021: 6.3%2021 Class median: 8.3%2022: 7.2%2022 Class median: 5.2%222023: 10.0%2023 Class median: 3.7%
YearTestsMechanical failClass medianAny failRecalls
202311010.0%3.7%19.1%3
20222377.2%5.2%21.5%3
20214,7716.3%8.3%16.9%2
20206,6547.9%9.3%19.3%1
201910,69110.6%12.0%21.4%1
201810,80411.7%14.0%21.1%3
201711,77815.9%18.0%26.5%2
201613,01317.3%22.1%29.6%3
201511,93319.9%24.4%30.5%3
201411,79422.9%28.5%33.0%3
201312,32924.8%30.8%34.5%7
20129,67626.6%33.7%35.7%5
201111,87527.6%34.4%36.7%4
20108,99431.7%35.9%41.2%6
20096,58931.4%36.9%40.8%5
20085,38330.9%38.3%40.1%5
20074,39732.5%37.8%41.2%3
20062,90934.1%40.1%42.7%3
20051,94034.6%41.9%41.4%2
20041,17034.3%39.8%42.8%1
Older years (9)
YearTestsMechanical failClass medianAny failRecalls
200329342.3%39.3%46.8%1
200225135.5%38.4%43.4%0
200114047.1%36.3%50.7%0
200019234.4%34.5%44.3%0
199915335.3%34.9%39.9%0
19986931.9%34.0%42.0%0
19925525.5%36.1%38.2%0
19915527.3%38.6%34.6%0
19906426.6%28.7%34.4%0

Most common MOT failures

The defects testers recorded most often on this model, in DVSA’s own wording (English), per 1,000 MOT tests.

Defect (DVSA wording)SystemPer 1,000 tests
Pins and bushes: pin or bush excessively wornSuspension and wheels57.8
tread depth below requirements of 1.6mmTyres (wear)43.3
Pins and bushes: pin or bush excessively wornSuspension and wheels38.7
Brake pads: less than 1.5 mm thickBrakes31.1
Condition: has ply or cords exposedTyres (wear)29.4
Washers: provides insufficient washer liquidWipers and windscreen (wear)28.4
Wipers: does not clear the windscreen effectivelyWipers and windscreen (wear)28.1
Position lamp: not workingLights and electrics (wear)26.5
Malfunction indicator lamp: inoperative or indicates a malfunctionEngine, exhaust and emissions23.1
Stop lamp: not workingLights and electrics (wear)23.1
Coil spring: fractured or brokenSuspension and wheels22.7
Headlamp aim: too lowLights and electrics (wear)22.3
Joints: constant velocity boot split or insecure, no longer prevents the ingress of dirtBody, chassis and corrosion22.2
Condition: has a cut in excess of the requirements deep enough to reach the ply or cordsTyres (wear)21.4
Linkage ball joint dust cover: ball joint dust cover no longer prevents the ingress of dirtSuspension and wheels21

What fails, by mileage

Share of MOT tests that failed on each system. Wear items (bulbs, tyres, wipers, plates) are excluded from the reliability score.

System0-50k km50-100k km100-150k km150k+ km
Mechanical fail6.2% (6.5)12.2% (14.2)18.4% (22.2)27.1% (33.0)
Tests9,66224,53130,36483,813
Suspension and wheels1.3% (1.3)4.6% (4.7)10.4% (9.4)17.4% (16.2)
Brakes2.3% (2.8)4.7% (6.5)6.3% (8.2)9.4% (13.8)
Engine, exhaust and emissions1.7% (1.2)3.1% (2.1)3.6% (3.2)5.2% (5.6)
Steering0.2% (0.2)0.3% (0.6)0.4% (1.6)1.2% (3.2)
Body, chassis and corrosion0.9% (0.9)1.2% (2.9)2.1% (5.5)5.6% (9.2)
Seat belts and airbags0.5% (0.6)0.7% (0.7)0.9% (1.2)1.2% (2.4)
Lights and electrics (wear)3.5% (5.6)5.9% (10.5)8.6% (16.6)13.0% (22.7)
Tyres (wear)5.0% (3.2)6.4% (5.1)7.6% (5.7)8.2% (6.6)
Wipers and windscreen (wear)3.0% (4.5)4.5% (5.9)5.6% (6.5)7.7% (7.9)
Other and plates (wear)0.1% (0.2)0.2% (0.2)0.4% (0.4)0.5% (0.5)

(…) = Class median, same age and mileage

Pre-purchase checklist for the mechanic

Built from the systems where this model fails more often than its class at 100,000 km and above, and from open recalls.

  1. Recalls: 5 serious recalls name this model — ask for proof the work was done
    • SR/02935/26 · 2013–2024 · Moisture ingress could lead to corrosion of a steering rack bolt, which may result in a fracture of the bolt and a loss of steering…
    • SR/00313/25 · 2024 · Due to an incorrectly screwed rear left brake line, leaks can occur where the brake hose is attached. It can lead to a loss of brake fluid,…
    • A12/02730/24 · 2024 · Leaks can occur where the brake hose is attached because the rear left brake line is improperly screwed. A leak may lead to a slow loss of…
    • A12/02575/24 · 2024 · Due to the incorrect screwing of the rear left brake line, a leak can occur where the brake hose is attached, leading to a slow loss of…
    • A12/01340/23 · 2023 · The seat belts may have been damaged during production, which can reduce their strength in the event of an accident, increasing the risk of…

    Check a specific car by its VIN on the official sites: NHTSA (US) · DVSA (UK)

Official recalls

Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.

  • EU Safety GateSerious2013–2024

    Moisture ingress could lead to corrosion of a steering rack bolt, which may result in a fracture of the bolt and a loss of steering capability, increasing the risk of accidents.

    SR/02935/26 ↗
  • EU Safety GateSerious2024

    Due to an incorrectly screwed rear left brake line, leaks can occur where the brake hose is attached. It can lead to a loss of brake fluid, affecting the braking performance and increasing the risk of accidents and…

    Full text

    Due to an incorrectly screwed rear left brake line, leaks can occur where the brake hose is attached. It can lead to a loss of brake fluid, affecting the braking performance and increasing the risk of accidents and injuries.

    SR/00313/25 ↗
  • EU Safety GateSerious2024

    Leaks can occur where the brake hose is attached because the rear left brake line is improperly screwed. A leak may lead to a slow loss of brake fluid, affecting the braking performance, increasing the risk of accidents…

    Full text

    Leaks can occur where the brake hose is attached because the rear left brake line is improperly screwed. A leak may lead to a slow loss of brake fluid, affecting the braking performance, increasing the risk of accidents and injuries.

    A12/02730/24 ↗
  • EU Safety GateSerious2024

    Due to the incorrect screwing of the rear left brake line, a leak can occur where the brake hose is attached, leading to a slow loss of brake fluid. Braking performance can be affected, increasing the risk of accidents…

    Full text

    Due to the incorrect screwing of the rear left brake line, a leak can occur where the brake hose is attached, leading to a slow loss of brake fluid. Braking performance can be affected, increasing the risk of accidents and injuries.

    A12/02575/24 ↗
  • EU Safety GateSerious2023

    The seat belts may have been damaged during production, which can reduce their strength in the event of an accident, increasing the risk of injury.

    A12/01340/23 ↗
  • EU Safety Gate2022, 2023

    Due to bulges or tears on the inner side of the tyre, a gradual or sudden loss of pressure may occur. This can affect driving stability, increasing the risk of an accident.

    A12/01226/23 ↗
Show 10 more recalls
  • EU Safety Gate2021, 2022

    A wheel control arm may be faulty and can fail to work properly. The corresponding wheel can bend sideways, making steering very difficult, increasing the risk of an accident.

    A12/01732/22 ↗
  • EU Safety Gate2006–2018

    Cars initially used for internal purposes of Volkswagen AG might not have been correctly modified before they were sold to the general public. There is a possibility that certain safety systems of these cars are not…

    Full text

    Cars initially used for internal purposes of Volkswagen AG might not have been correctly modified before they were sold to the general public. There is a possibility that certain safety systems of these cars are not correctly modified for street use.

    A12/00220/20 ↗
  • EU Safety Gate2008–2016

    Cars initially used for internal purposes of Volkswagen AG might not have been correctly modified before they were sold to the general public. There is a possibility that certain safety systems of these cars are not…

    Full text

    Cars initially used for internal purposes of Volkswagen AG might not have been correctly modified before they were sold to the general public. There is a possibility that certain safety systems of these cars are not correctly modified for street use.

    A12/00221/20 ↗
  • EU Safety Gate2018

    The fastening of the active headrest may be defective. In the event of an accident, the headrest may become detached from the back of the seat, increasing the risk of injury to the person occupying the seat.

    A12/0774/18 ↗
  • EU Safety Gate2008–2010

    null The earth connection of the ABS/ESP system may be interrupted as a result of thermomechanical overload. This would lead to the failure of the ABS/ESP system and the risk of an accident.

    A12/0909/17 ↗
  • EU Safety Gate2010–2013

    null If mechanical damage occurs to the varnish layer of the gas tank, it could lead to the outer shell of the gas tank no longer having the required corrosion protection. With ongoing corrosion over an extended period…

    Full text

    null If mechanical damage occurs to the varnish layer of the gas tank, it could lead to the outer shell of the gas tank no longer having the required corrosion protection. With ongoing corrosion over an extended period of time, the residual wall thickness of the gas tank could become too low and the gas tank could burst.

    A12/0300/17 ↗
  • EU Safety Gate2005–2010

    null Corrosion on the front gas tank may reduce the thickness of the gas tank wall. Insufficient thickness of the tank wall poses the risk that the gas tank may burst.

    A12/1312/16 ↗
  • EU Safety Gate2012, 2013

    null There may be a defect in the earth connection of the electrical system control unit in the sill area. In the worst-case scenario, the engine could start by itself when the remote-control unit is operated, which…

    Full text

    null There may be a defect in the earth connection of the electrical system control unit in the sill area. In the worst-case scenario, the engine could start by itself when the remote-control unit is operated, which would make the vehicle move forward if the engine is in gear.

    A12/0027/16 ↗
  • EU Safety GateSerious2013

    null The airbag may deploy incorrectly as a result of defective welding of the gas generator.

    A12/1493/15 ↗
  • EU Safety Gate2003–2013

    null A ball stud holding the gas-pressure spring on the rear door may work loose and in the worst case become detached. If this occurs, the door could fall off.

    A12/0389/14 ↗