Vans
Citroën Berlingo reliability
In 188,545 UK MOT tests, 24.7% of Citroën Berlingo cars failed for a mechanical or structural defect. The median van of the same age and mileage: 23.9%.
- Best years
- —
- Years with most failures
- 2018, 2021, 2022
- Weak spot at high mileage
- Steering, Seat belts and airbags
- Official recalls
- 24 recalls, 8 serious
- Mechanical failure rate
- 24.7%
- Class median, same age and mileage
- 23.9%
- MOT tests
- 188,545
- US owner complaints
- 0
MOT results by test year
The whole fleet of this model at each year’s MOT, against its class at the same age and mileage. Shows whether the model keeps its standing as it ages.
| MOT year | Tests | Mechanical fail | Class median | Any fail |
|---|---|---|---|---|
| 2024 | 188,545 | 24.7% | 23.9% | 41.3% |
| 2023 | 188,793 | 24.6% | 23.9% | 41.5% |
Failure rate by year of first registration
Mechanical failure rate at the 2024 MOT, by the year the car was first registered, against the median of its class at the same age and mileage.
| Year | Tests | Mechanical fail | Class median | Any fail | Recalls |
|---|---|---|---|---|---|
| 2022 | 399 | 6.5% | 4.2% | 22.3% | 4 |
| 2021 | 12,538 | 9.8% | 8.4% | 28.8% | 5 |
| 2020 | 12,709 | 9.7% | 9.7% | 28.6% | 5 |
| 2019 | 15,735 | 12.3% | 11.8% | 28.1% | 8 |
| 2018 | 13,891 | 16.8% | 13.9% | 37.4% | 6 |
| 2017 | 13,822 | 20.2% | 18.0% | 40.0% | 6 |
| 2016 | 14,410 | 22.3% | 21.6% | 40.3% | 6 |
| 2015 | 15,224 | 25.5% | 23.9% | 43.4% | 2 |
| 2014 | 14,410 | 28.8% | 27.3% | 45.9% | 1 |
| 2013 | 12,475 | 29.9% | 29.5% | 46.4% | 0 |
| 2012 | 9,808 | 32.7% | 31.8% | 48.0% | 0 |
| 2011 | 8,018 | 33.8% | 32.9% | 48.4% | 0 |
| 2010 | 7,453 | 34.3% | 34.4% | 48.5% | 0 |
| 2009 | 8,167 | 35.2% | 35.1% | 49.9% | 0 |
| 2008 | 5,630 | 36.8% | 36.2% | 50.2% | 0 |
| 2007 | 5,291 | 34.3% | 35.1% | 47.2% | 0 |
| 2006 | 5,102 | 36.0% | 37.3% | 48.1% | 0 |
| 2005 | 3,793 | 38.9% | 39.0% | 50.4% | 0 |
| 2004 | 3,510 | 37.2% | 37.3% | 49.1% | 0 |
What fails, by mileage
Share of MOT tests that failed on each system. Wear items (bulbs, tyres, wipers, plates) are excluded from the reliability score.
(…) = Class median, same age and mileage
Pre-purchase checklist for the mechanic
Built from the systems where this model fails more often than its class at 100,000 km and above, and from open recalls.
- Steering: check for play in the rack, track rod ends and column, power-steering leaks and noise on full lock.
- Seat belts and airbags: check every belt retracts and latches, and that the airbag/SRS light goes out after start.
- Recalls: 5 serious recalls name this model — ask for proof the work was done
- SR/01175/26 · 2025 · In vehicles fitted with a DV5 diesel engine, the NOx sensor may not have been properly tightened during installation. This may allow…
- SR/00368/26 · 2025 · Vehicles fitted with a DV5R engine may experience a fuel leak. The non-conformity of the round shape on the cone of the common rail may…
- SR/00173/26 · 2023–2025 · The wheel bolts may loosen or detach, resulting in wheel detachment and increasing the risk of accidents and injuries.
- A12/00042/22 · 2017–2021 · The electrical supply to and software for the additional heating is not correctly designed and the heater can shut off too soon when the…
- A12/00344/20 · 2018, 2019 · The front passenger seatbelt is defective. As a result, its restraining function will be impaired, increasing the risk of injury in the…
Check a specific car by its VIN on the official sites: NHTSA (US) · DVSA (UK)
Official recalls
Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.
In vehicles fitted with a DV5 diesel engine, the NOx sensor may not have been properly tightened during installation. This may allow exhaust gases to enter the engine compartment and could result in visible exhaust…
SR/01175/26 ↗Full text
In vehicles fitted with a DV5 diesel engine, the NOx sensor may not have been properly tightened during installation. This may allow exhaust gases to enter the engine compartment and could result in visible exhaust fumes around the engine area, overheating of nearby components, a risk of fire, and increased NOx emissions.
Vehicles without a bulkhead were manufactured and supplied with a single instead of a double seatback. There is a risk of excessive movement of the seatback in the event of a rear-end collision, which could result in…
SR/01176/26 ↗Full text
Vehicles without a bulkhead were manufactured and supplied with a single instead of a double seatback. There is a risk of excessive movement of the seatback in the event of a rear-end collision, which could result in the driver being thrown out and injuries.
The DV5R engine may experience a loss of power due to slippage of the water pump pulley. This slippage can cause misalignment of the timing belt, potentially resulting in engine shutdown. The sprocket of the water pump…
SR/00969/26 ↗Full text
The DV5R engine may experience a loss of power due to slippage of the water pump pulley. This slippage can cause misalignment of the timing belt, potentially resulting in engine shutdown. The sprocket of the water pump pulley may detach from the shaft, which can lead to the loss of parts on the road and increase the risk of accidents and injuries.
Vehicles fitted with a DV5R engine may experience a fuel leak. The non-conformity of the round shape on the cone of the common rail may cause the nut to loosen, resulting in the possibility of fuel leaking between the…
SR/00368/26 ↗Full text
Vehicles fitted with a DV5R engine may experience a fuel leak. The non-conformity of the round shape on the cone of the common rail may cause the nut to loosen, resulting in the possibility of fuel leaking between the nut and the thread, leading to fuel vapours and fuel flow into the hot exhaust system. This may lead to a fire under the bonnet.
The wheel bolts may loosen or detach, resulting in wheel detachment and increasing the risk of accidents and injuries.
SR/00173/26 ↗The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…
SR/03151/25 ↗Full text
The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.
Show 18 more recalls
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…
SR/02655/25 ↗Full text
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.
The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started,…
SR/01423/25 ↗Full text
The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started, to an acceleration power's loss and to the engine suddenly cutting out while driving. This increases the risk of accidents and injuries.
When there is a specific error in the vacuum circuit and after 6 seconds with the brake applied, the electronic control unit send an "Invalid Value" to the hydraulic brake compensation (HBC). This can cause the HBC to…
A12/03181/24 ↗Full text
When there is a specific error in the vacuum circuit and after 6 seconds with the brake applied, the electronic control unit send an "Invalid Value" to the hydraulic brake compensation (HBC). This can cause the HBC to stop functioning, leading to a reduction in braking efficiency. This increases the risk of accidents and injuries.
A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.
A12/01876/23 ↗The electrical supply to and software for the additional heating is not correctly designed and the heater can shut off too soon when the vehicle is switched off. This can lead to fuel remaining in the heater, producing…
A12/00042/22 ↗Full text
The electrical supply to and software for the additional heating is not correctly designed and the heater can shut off too soon when the vehicle is switched off. This can lead to fuel remaining in the heater, producing smoke and fuel leaks increasing the risk of fire.
The software in the calculator, used only in after-sales operations and for a limited period (October 2020 to January 2021), was incorrect. This may lead to Nitrogen Oxides (NOx) emissions above the regulatory limits.…
A12/00103/22 ↗Full text
The software in the calculator, used only in after-sales operations and for a limited period (October 2020 to January 2021), was incorrect. This may lead to Nitrogen Oxides (NOx) emissions above the regulatory limits. Excessive NOx emissions pose a risk to the environment.
The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of…
A12/01186/21 ↗Full text
The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The clipping of the control button of the hand-brake restraint system might be incorrect.Consequently, the hand-brake might not be correctly engaged when used, leading to the vehicle to spontaneously move when parked,…
A12/00788/21 ↗Full text
The clipping of the control button of the hand-brake restraint system might be incorrect.Consequently, the hand-brake might not be correctly engaged when used, leading to the vehicle to spontaneously move when parked, increasing the risk of accident or injuries to by-passers.
The track rods may be damaged when they are under load. This may result in a loss of driving stability, increasing the risk of an accident.
A12/01160/20 ↗The front passenger seatbelt is defective. As a result, its restraining function will be impaired, increasing the risk of injury in the event of an accident.
A12/00344/20 ↗The steering column is not manufactured according to specifications.This may result in steering failure and loss of control over the vehicle, increasing the risk of an accident.
A12/00034/20 ↗Possible misalignment of the ratchet on the handbrake lever latching mechanism. As a result the handbrake may not engage or could disengage by itself, increasing the risk of an accident.
A12/0925/19 ↗Certain airbag control units might have received a shock during transportation to the vehicle assembly plant, which might cause an internal fault. In the event of an accident, the airbags might not work correctly.
A12/0778/18 ↗null Premature ageing of the tyres could lead to loss of tyre pressure.
A12/0898/17 ↗null A problem with a component of the gearbox actuator could prevent gear changing or cause the driver to change to the wrong gear. This could lead to the vehicle moving in the opposite direction to that intended by…
A12/0481/17 ↗Full text
null A problem with a component of the gearbox actuator could prevent gear changing or cause the driver to change to the wrong gear. This could lead to the vehicle moving in the opposite direction to that intended by the driver.
null A non-conformity in the bonnet catch could lead to the bonnet opening during driving which could lead to an accident.
A12/1391/16 ↗null The driver's airbag may not deploy properly in the event of an accident due to the possible failure of one of its components.
A12/1011/16 ↗null The front seat-belt upper fixing mechanism bolts may become loose and, in extreme cases, may break therefore not providing protection in the event of a collision.
A12/0003/13 ↗