Furgonetas
Fiabilidad del Citroën Berlingo
En 188.545 inspecciones MOT británicas, el 24,7 % de los Citroën Berlingo no pasó por un defecto mecánico o estructural. La mediana de un furgoneta con la misma edad y kilometraje: 23,9 %.
- Mejores años
- —
- Años con más fallos
- 2018, 2021, 2022
- Punto débil con kilometraje alto
- Dirección, Cinturones y airbags
- Llamadas a revisión oficiales
- 24 llamadas a revisión, 8 graves
- Tasa de fallo mecánico
- 24,7%
- Mediana de la clase, misma edad y kilometraje
- 23,9%
- inspecciones MOT
- 188.545
- Quejas en EE. UU.
- 0
Resultados MOT por año de inspección
Toda la flota de este modelo en la inspección de cada año, frente a su clase con la misma edad y kilometraje. Muestra si el modelo mantiene su nivel al envejecer.
| Año de inspección | Inspecciones | Fallo mecánico | Mediana de la clase | Cualquier fallo |
|---|---|---|---|---|
| 2024 | 188.545 | 24,7% | 23,9% | 41,3% |
| 2023 | 188.793 | 24,6% | 23,9% | 41,5% |
Tasa de fallo por año de primera matriculación
Tasa de fallo mecánico en la MOT de 2024 según el año de primera matriculación, frente a la mediana de su clase con la misma edad y kilometraje.
| Año | Inspecciones | Fallo mecánico | Mediana de la clase | Cualquier fallo | Llamadas |
|---|---|---|---|---|---|
| 2022 | 399 | 6,5% | 4,2% | 22,3% | 4 |
| 2021 | 12.538 | 9,8% | 8,4% | 28,8% | 5 |
| 2020 | 12.709 | 9,7% | 9,7% | 28,6% | 5 |
| 2019 | 15.735 | 12,3% | 11,8% | 28,1% | 8 |
| 2018 | 13.891 | 16,8% | 13,9% | 37,4% | 6 |
| 2017 | 13.822 | 20,2% | 18,0% | 40,0% | 6 |
| 2016 | 14.410 | 22,3% | 21,6% | 40,3% | 6 |
| 2015 | 15.224 | 25,5% | 23,9% | 43,4% | 2 |
| 2014 | 14.410 | 28,8% | 27,3% | 45,9% | 1 |
| 2013 | 12.475 | 29,9% | 29,5% | 46,4% | 0 |
| 2012 | 9808 | 32,7% | 31,8% | 48,0% | 0 |
| 2011 | 8018 | 33,8% | 32,9% | 48,4% | 0 |
| 2010 | 7453 | 34,3% | 34,4% | 48,5% | 0 |
| 2009 | 8167 | 35,2% | 35,1% | 49,9% | 0 |
| 2008 | 5630 | 36,8% | 36,2% | 50,2% | 0 |
| 2007 | 5291 | 34,3% | 35,1% | 47,2% | 0 |
| 2006 | 5102 | 36,0% | 37,3% | 48,1% | 0 |
| 2005 | 3793 | 38,9% | 39,0% | 50,4% | 0 |
| 2004 | 3510 | 37,2% | 37,3% | 49,1% | 0 |
Qué falla según el kilometraje
Porcentaje de inspecciones suspendidas en cada sistema. Los elementos de desgaste (bombillas, neumáticos, escobillas, matrículas) no cuentan para el índice.
(…) = Mediana de la clase, misma edad y kilometraje
Lista de comprobación para el mecánico antes de comprar
Basada en los sistemas en los que este modelo falla más que su clase a partir de 100.000 km y en las llamadas a revisión abiertas.
- Dirección: holgura de cremallera, bieletas y rótulas, fugas de la asistencia y ruidos con el volante a tope.
- Cinturones y airbags: cada cinturón debe recogerse y abrocharse, y el testigo del airbag apagarse tras arrancar.
- Llamadas a revisión: 5 graves afectan a este modelo; pide prueba de que se hicieron
- SR/01175/26 · 2025 · In vehicles fitted with a DV5 diesel engine, the NOx sensor may not have been properly tightened during installation. This may allow…
- SR/00368/26 · 2025 · Vehicles fitted with a DV5R engine may experience a fuel leak. The non-conformity of the round shape on the cone of the common rail may…
- SR/00173/26 · 2023–2025 · The wheel bolts may loosen or detach, resulting in wheel detachment and increasing the risk of accidents and injuries.
- A12/00042/22 · 2017–2021 · The electrical supply to and software for the additional heating is not correctly designed and the heater can shut off too soon when the…
- A12/00344/20 · 2018, 2019 · The front passenger seatbelt is defective. As a result, its restraining function will be impaired, increasing the risk of injury in the…
Comprueba un coche concreto por su VIN en las webs oficiales: NHTSA (US) · DVSA (UK)
Llamadas a revisión oficiales
Campañas publicadas por la NHTSA (EE. UU.) y el EU Safety Gate que citan este modelo. Comprueba por VIN si afecta a un coche concreto.
In vehicles fitted with a DV5 diesel engine, the NOx sensor may not have been properly tightened during installation. This may allow exhaust gases to enter the engine compartment and could result in visible exhaust…
SR/01175/26 ↗Texto completo
In vehicles fitted with a DV5 diesel engine, the NOx sensor may not have been properly tightened during installation. This may allow exhaust gases to enter the engine compartment and could result in visible exhaust fumes around the engine area, overheating of nearby components, a risk of fire, and increased NOx emissions.
Vehicles without a bulkhead were manufactured and supplied with a single instead of a double seatback. There is a risk of excessive movement of the seatback in the event of a rear-end collision, which could result in…
SR/01176/26 ↗Texto completo
Vehicles without a bulkhead were manufactured and supplied with a single instead of a double seatback. There is a risk of excessive movement of the seatback in the event of a rear-end collision, which could result in the driver being thrown out and injuries.
The DV5R engine may experience a loss of power due to slippage of the water pump pulley. This slippage can cause misalignment of the timing belt, potentially resulting in engine shutdown. The sprocket of the water pump…
SR/00969/26 ↗Texto completo
The DV5R engine may experience a loss of power due to slippage of the water pump pulley. This slippage can cause misalignment of the timing belt, potentially resulting in engine shutdown. The sprocket of the water pump pulley may detach from the shaft, which can lead to the loss of parts on the road and increase the risk of accidents and injuries.
Vehicles fitted with a DV5R engine may experience a fuel leak. The non-conformity of the round shape on the cone of the common rail may cause the nut to loosen, resulting in the possibility of fuel leaking between the…
SR/00368/26 ↗Texto completo
Vehicles fitted with a DV5R engine may experience a fuel leak. The non-conformity of the round shape on the cone of the common rail may cause the nut to loosen, resulting in the possibility of fuel leaking between the nut and the thread, leading to fuel vapours and fuel flow into the hot exhaust system. This may lead to a fire under the bonnet.
The wheel bolts may loosen or detach, resulting in wheel detachment and increasing the risk of accidents and injuries.
SR/00173/26 ↗The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…
SR/03151/25 ↗Texto completo
The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.
Mostrar 18 llamadas más
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…
SR/02655/25 ↗Texto completo
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.
The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started,…
SR/01423/25 ↗Texto completo
The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started, to an acceleration power's loss and to the engine suddenly cutting out while driving. This increases the risk of accidents and injuries.
When there is a specific error in the vacuum circuit and after 6 seconds with the brake applied, the electronic control unit send an "Invalid Value" to the hydraulic brake compensation (HBC). This can cause the HBC to…
A12/03181/24 ↗Texto completo
When there is a specific error in the vacuum circuit and after 6 seconds with the brake applied, the electronic control unit send an "Invalid Value" to the hydraulic brake compensation (HBC). This can cause the HBC to stop functioning, leading to a reduction in braking efficiency. This increases the risk of accidents and injuries.
A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.
A12/01876/23 ↗The electrical supply to and software for the additional heating is not correctly designed and the heater can shut off too soon when the vehicle is switched off. This can lead to fuel remaining in the heater, producing…
A12/00042/22 ↗Texto completo
The electrical supply to and software for the additional heating is not correctly designed and the heater can shut off too soon when the vehicle is switched off. This can lead to fuel remaining in the heater, producing smoke and fuel leaks increasing the risk of fire.
The software in the calculator, used only in after-sales operations and for a limited period (October 2020 to January 2021), was incorrect. This may lead to Nitrogen Oxides (NOx) emissions above the regulatory limits.…
A12/00103/22 ↗Texto completo
The software in the calculator, used only in after-sales operations and for a limited period (October 2020 to January 2021), was incorrect. This may lead to Nitrogen Oxides (NOx) emissions above the regulatory limits. Excessive NOx emissions pose a risk to the environment.
The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of…
A12/01186/21 ↗Texto completo
The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The clipping of the control button of the hand-brake restraint system might be incorrect.Consequently, the hand-brake might not be correctly engaged when used, leading to the vehicle to spontaneously move when parked,…
A12/00788/21 ↗Texto completo
The clipping of the control button of the hand-brake restraint system might be incorrect.Consequently, the hand-brake might not be correctly engaged when used, leading to the vehicle to spontaneously move when parked, increasing the risk of accident or injuries to by-passers.
The track rods may be damaged when they are under load. This may result in a loss of driving stability, increasing the risk of an accident.
A12/01160/20 ↗The front passenger seatbelt is defective. As a result, its restraining function will be impaired, increasing the risk of injury in the event of an accident.
A12/00344/20 ↗The steering column is not manufactured according to specifications.This may result in steering failure and loss of control over the vehicle, increasing the risk of an accident.
A12/00034/20 ↗Possible misalignment of the ratchet on the handbrake lever latching mechanism. As a result the handbrake may not engage or could disengage by itself, increasing the risk of an accident.
A12/0925/19 ↗Certain airbag control units might have received a shock during transportation to the vehicle assembly plant, which might cause an internal fault. In the event of an accident, the airbags might not work correctly.
A12/0778/18 ↗null Premature ageing of the tyres could lead to loss of tyre pressure.
A12/0898/17 ↗null A problem with a component of the gearbox actuator could prevent gear changing or cause the driver to change to the wrong gear. This could lead to the vehicle moving in the opposite direction to that intended by…
A12/0481/17 ↗Texto completo
null A problem with a component of the gearbox actuator could prevent gear changing or cause the driver to change to the wrong gear. This could lead to the vehicle moving in the opposite direction to that intended by the driver.
null A non-conformity in the bonnet catch could lead to the bonnet opening during driving which could lead to an accident.
A12/1391/16 ↗null The driver's airbag may not deploy properly in the event of an accident due to the possible failure of one of its components.
A12/1011/16 ↗null The front seat-belt upper fixing mechanism bolts may become loose and, in extreme cases, may break therefore not providing protection in the event of a collision.
A12/0003/13 ↗