Furgonetas
Fiabilidad del Ford Transit Custom / Tourneo Custom
En 156.185 inspecciones MOT británicas, el 8,6 % de los Ford Transit Custom / Tourneo Custom no pasó por un defecto mecánico o estructural. La mediana de un furgoneta con la misma edad y kilometraje: 11,5 %.
- Mejores años
- 2018, 2019, 2020
- Años con más fallos
- 2022
- Punto débil con kilometraje alto
- Nada destaca frente a su clase
- Llamadas a revisión oficiales
- 19 llamadas a revisión, 12 graves
- Tasa de fallo mecánico
- 8,6%
- Mediana de la clase, misma edad y kilometraje
- 11,5%
- inspecciones MOT
- 156.185
- Quejas en EE. UU.
- 0
Resultados MOT por año de inspección
Toda la flota de este modelo en la inspección de cada año, frente a su clase con la misma edad y kilometraje. Muestra si el modelo mantiene su nivel al envejecer.
| Año de inspección | Inspecciones | Fallo mecánico | Mediana de la clase | Cualquier fallo |
|---|---|---|---|---|
| 2024 | 156.185 | 8,6% | 11,5% | 22,5% |
| 2023 | 110.599 | 8,2% | 10,7% | 21,2% |
Tasa de fallo por año de primera matriculación
Tasa de fallo mecánico en la MOT de 2024 según el año de primera matriculación, frente a la mediana de su clase con la misma edad y kilometraje.
| Año | Inspecciones | Fallo mecánico | Mediana de la clase | Cualquier fallo | Llamadas |
|---|---|---|---|---|---|
| 2024 | 84 | 2,4% | 1,2% | 6,0% | 6 |
| 2023 | 224 | 1,3% | 3,0% | 5,4% | 4 |
| 2022 | 1393 | 6,3% | 4,9% | 16,9% | 2 |
| 2021 | 44.302 | 7,6% | 8,9% | 23,7% | 4 |
| 2020 | 35.678 | 8,2% | 10,3% | 21,8% | 6 |
| 2019 | 44.384 | 8,5% | 13,0% | 21,4% | 6 |
| 2018 | 29.115 | 10,6% | 15,0% | 23,4% | 1 |
| 2017 | 300 | 17,0% | 18,5% | 28,3% | 2 |
| 2016 | 305 | 18,7% | 22,4% | 28,2% | 1 |
| 2015 | 202 | 28,2% | 24,8% | 36,1% | 0 |
| 2014 | 116 | 29,3% | 28,3% | 37,9% | 0 |
| 2013 | 53 | 26,4% | 31,8% | 41,5% | 0 |
Qué falla según el kilometraje
Porcentaje de inspecciones suspendidas en cada sistema. Los elementos de desgaste (bombillas, neumáticos, escobillas, matrículas) no cuentan para el índice.
(…) = Mediana de la clase, misma edad y kilometraje
Lista de comprobación para el mecánico antes de comprar
Basada en los sistemas en los que este modelo falla más que su clase a partir de 100.000 km y en las llamadas a revisión abiertas.
- Llamadas a revisión: 5 graves afectan a este modelo; pide prueba de que se hicieron
- SR/02824/26 · 2024–2026 · A touch condition between the diesel fuel tank and the DCIV bulkhead bracket bolt may cause damage to the fuel tank over time and fuel to…
- SR/02314/26 · 2023–2025 · Cracks in the fuel line could lead to a fuel leak above the exhaust after-treatment systems. If the leaking fuel comes into contact with…
- SR/02057/26 · 2023–2026 · During installation of the high-security locks, metal shavings from the B-pillar may have damaged the seatbelt. This could reduce the…
- SR/00540/26 · 2025 · The weld seam on the seat frame is defective. In the event of an accident, a defective weld seam may result in insufficient restraining…
- SR/00252/26 · 2025 · The driver-side airbag inflator could rupture during deployment and not fully inflate. In addition, the release of high-pressured gas may…
Comprueba un coche concreto por su VIN en las webs oficiales: NHTSA (US) · DVSA (UK)
Llamadas a revisión oficiales
Campañas publicadas por la NHTSA (EE. UU.) y el EU Safety Gate que citan este modelo. Comprueba por VIN si afecta a un coche concreto.
A touch condition between the diesel fuel tank and the DCIV bulkhead bracket bolt may cause damage to the fuel tank over time and fuel to leak onto hot engine or exhaust components. As a result, the leaking fuel may…
SR/02824/26 ↗Texto completo
A touch condition between the diesel fuel tank and the DCIV bulkhead bracket bolt may cause damage to the fuel tank over time and fuel to leak onto hot engine or exhaust components. As a result, the leaking fuel may ignite and result in a fire.
Excessive gas emission has been identified in the affected 12V batteries. In the absence of a vent tube, hazardous gases such as hydrogen sulphide may enter the driver compartment from under the front seat, posing a…
SR/00932/26 ↗Texto completo
Excessive gas emission has been identified in the affected 12V batteries. In the absence of a vent tube, hazardous gases such as hydrogen sulphide may enter the driver compartment from under the front seat, posing a risk of injuries.
Cracks in the fuel line could lead to a fuel leak above the exhaust after-treatment systems. If the leaking fuel comes into contact with hot components, it could ignite and cause a vehicle fire.
SR/02314/26 ↗During installation of the high-security locks, metal shavings from the B-pillar may have damaged the seatbelt. This could reduce the restraining effectiveness of the seatbelt in the event of an accident, increasing the…
SR/02057/26 ↗Texto completo
During installation of the high-security locks, metal shavings from the B-pillar may have damaged the seatbelt. This could reduce the restraining effectiveness of the seatbelt in the event of an accident, increasing the risk of injury.
The weld seam on the seat frame is defective. In the event of an accident, a defective weld seam may result in insufficient restraining effect of the seatbelt, increasing the risk of injuries.
SR/00540/26 ↗The driver-side airbag inflator could rupture during deployment and not fully inflate. In addition, the release of high-pressured gas may propel pieces of the inflator and airbag module into the occupant compartment.…
SR/00252/26 ↗Texto completo
The driver-side airbag inflator could rupture during deployment and not fully inflate. In addition, the release of high-pressured gas may propel pieces of the inflator and airbag module into the occupant compartment. This could increase the risk of injury.
Mostrar 13 llamadas más
A wiring harness comes into contact with the brake lines. This may lead to wear, corrosion and a leak in the brake lines and to reduced braking performance, which may lead to an increased risk of accidents.
SR/02877/25 ↗The rear shock absorbers could break and impair driving stability, which could damage the rear brake line and/or cause a release of the coil spring. This increases the risk of accidents and injuries.
SR/03607/25 ↗A bent anode plate on the high-voltage battery cells could lead to a short circuit, consequently leading to engine failure and the shutdown of the battery, increasing the risk of fire.
SR/03119/25 ↗One or more bolts on the bottom cover of the power distribution board can break and may lead to various electrical malfunctions. This can lead to the vehicle catching fire due to an increased resistance.
SR/02574/25 ↗Some seat screws may not be properly tightened, leading the seat to become loose. This can make the restraining devices less effective, increasing the risk of injury.
SR/02169/25 ↗A faulty part within the high-voltage battery cells could cause the battery to short-circuit and cause a fire.
A12/02543/23 ↗Due to an error in the assembly process, there might be a single, loose screw in the steering support.The loose screw could cause a sudden, temporary blocking of the steering while the vehicle is in motion, increasing…
A12/00853/21 ↗Texto completo
Due to an error in the assembly process, there might be a single, loose screw in the steering support.The loose screw could cause a sudden, temporary blocking of the steering while the vehicle is in motion, increasing the risk of an accident.
The weld penetration on the left-hand lower control arm does not meet specification.As a result, cracks can be formed on the control arm, increasing the risk of an accident.
A12/01358/20 ↗The lower control arms fitted to vehicles may have missing or partial welds. As a result, the control arms could break, increasing the risk of an accident.
A12/01205/20 ↗The fuse for the electronic Run On Water Pump (ROWP) is inadequate and will not prevent it from overheating in case of failure.This will lead to the melting of the pump body and wiring, increasing the risk of fire.
A12/00937/20 ↗The twin battery positive cable might have been wrongly fitted.Consequently, it could loose itself leading to a loss of engine power or even a localised overheating and melting of components, increasing the risk of…
A12/00508/20 ↗Texto completo
The twin battery positive cable might have been wrongly fitted.Consequently, it could loose itself leading to a loss of engine power or even a localised overheating and melting of components, increasing the risk of accident or the vehicle catching fire.
The shoulder height adjuster bolt on the driver-side's front seatbelt may be incorrectly torqued. As a result, in the event of an accident, the seatbelt anchorage bolt may separate from the seatbelt shoulder height…
A12/0353/19 ↗Texto completo
The shoulder height adjuster bolt on the driver-side's front seatbelt may be incorrectly torqued. As a result, in the event of an accident, the seatbelt anchorage bolt may separate from the seatbelt shoulder height adjuster, leading to injuries.
null The vehicles pose the risk of injuries because they have been fitted with a brake pedal pin retaining "R" clip which does not meet material specification. Spring tension of the clip will be reduced. As a result,…
A12/0290/13 ↗Texto completo
null The vehicles pose the risk of injuries because they have been fitted with a brake pedal pin retaining "R" clip which does not meet material specification. Spring tension of the clip will be reduced. As a result, there is the possibility that the clip could come off, allowing the brake pedal to detach from the brake booster push rod. This would result in loss of brake actuation and could lead to an accident.