Ford Transit Custom / Tourneo Custom 2024: fiabilidad
84 inspecciones MOT de Ford Transit Custom / Tourneo Custom matriculados por primera vez en 2024: el 2,4 % no pasó por un defecto mecánico; la mediana de su clase con la misma edad y kilometraje es del 1,2 %.
- Tasa de fallo mecánico
- 2,4%
- Mediana de la clase, misma edad y kilometraje
- 1,2%
- No pasó la MOT (cualquier motivo)
- 6,0%
- inspecciones MOT
- 84
- Llamadas a revisión
- 6
Qué falla según el kilometraje
| Kilometraje | Inspecciones | Fallo mecánico | Mediana de la clase |
|---|---|---|---|
| 0-50k km | 82 | 2,4% | 1,2% |
| 50-100k km | 2 | 0,0% | —% |
Llamadas a revisión oficiales
Campañas publicadas por la NHTSA (EE. UU.) y el EU Safety Gate que citan este modelo. Comprueba por VIN si afecta a un coche concreto.
A touch condition between the diesel fuel tank and the DCIV bulkhead bracket bolt may cause damage to the fuel tank over time and fuel to leak onto hot engine or exhaust components. As a result, the leaking fuel may…
SR/02824/26 ↗Texto completo
A touch condition between the diesel fuel tank and the DCIV bulkhead bracket bolt may cause damage to the fuel tank over time and fuel to leak onto hot engine or exhaust components. As a result, the leaking fuel may ignite and result in a fire.
Excessive gas emission has been identified in the affected 12V batteries. In the absence of a vent tube, hazardous gases such as hydrogen sulphide may enter the driver compartment from under the front seat, posing a…
SR/00932/26 ↗Texto completo
Excessive gas emission has been identified in the affected 12V batteries. In the absence of a vent tube, hazardous gases such as hydrogen sulphide may enter the driver compartment from under the front seat, posing a risk of injuries.
Cracks in the fuel line could lead to a fuel leak above the exhaust after-treatment systems. If the leaking fuel comes into contact with hot components, it could ignite and cause a vehicle fire.
SR/02314/26 ↗During installation of the high-security locks, metal shavings from the B-pillar may have damaged the seatbelt. This could reduce the restraining effectiveness of the seatbelt in the event of an accident, increasing the…
SR/02057/26 ↗Texto completo
During installation of the high-security locks, metal shavings from the B-pillar may have damaged the seatbelt. This could reduce the restraining effectiveness of the seatbelt in the event of an accident, increasing the risk of injury.
A wiring harness comes into contact with the brake lines. This may lead to wear, corrosion and a leak in the brake lines and to reduced braking performance, which may lead to an increased risk of accidents.
SR/02877/25 ↗Some seat screws may not be properly tightened, leading the seat to become loose. This can make the restraining devices less effective, increasing the risk of injury.
SR/02169/25 ↗