Ford Transit Custom / Tourneo Custom 2024: Zuverlässigkeit
84 MOT-Prüfungen von Ford Transit Custom / Tourneo Custom mit Erstzulassung 2024: 2,4% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 1,2%.
- Technische Mängelquote
- 2,4%
- Klassenmedian, gleiches Alter und gleiche Laufleistung
- 1,2%
- Durchgefallen (jeder Grund)
- 6,0%
- MOT-Prüfungen
- 84
- Rückrufe
- 6
Was nach Laufleistung ausfällt
| Laufleistung | Prüfungen | Technische Mängel | Klassenmedian |
|---|---|---|---|
| 0-50k km | 82 | 2,4% | 1,2% |
| 50-100k km | 2 | 0,0% | —% |
Amtliche Rückrufe
Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.
A touch condition between the diesel fuel tank and the DCIV bulkhead bracket bolt may cause damage to the fuel tank over time and fuel to leak onto hot engine or exhaust components. As a result, the leaking fuel may…
SR/02824/26 ↗Volltext
A touch condition between the diesel fuel tank and the DCIV bulkhead bracket bolt may cause damage to the fuel tank over time and fuel to leak onto hot engine or exhaust components. As a result, the leaking fuel may ignite and result in a fire.
Excessive gas emission has been identified in the affected 12V batteries. In the absence of a vent tube, hazardous gases such as hydrogen sulphide may enter the driver compartment from under the front seat, posing a…
SR/00932/26 ↗Volltext
Excessive gas emission has been identified in the affected 12V batteries. In the absence of a vent tube, hazardous gases such as hydrogen sulphide may enter the driver compartment from under the front seat, posing a risk of injuries.
Cracks in the fuel line could lead to a fuel leak above the exhaust after-treatment systems. If the leaking fuel comes into contact with hot components, it could ignite and cause a vehicle fire.
SR/02314/26 ↗During installation of the high-security locks, metal shavings from the B-pillar may have damaged the seatbelt. This could reduce the restraining effectiveness of the seatbelt in the event of an accident, increasing the…
SR/02057/26 ↗Volltext
During installation of the high-security locks, metal shavings from the B-pillar may have damaged the seatbelt. This could reduce the restraining effectiveness of the seatbelt in the event of an accident, increasing the risk of injury.
A wiring harness comes into contact with the brake lines. This may lead to wear, corrosion and a leak in the brake lines and to reduced braking performance, which may lead to an increased risk of accidents.
SR/02877/25 ↗Some seat screws may not be properly tightened, leading the seat to become loose. This can make the restraining devices less effective, increasing the risk of injury.
SR/02169/25 ↗