Transporter und Hochdachkombis
Ford Transit Custom / Tourneo Custom: Zuverlässigkeit
Bei 156.185 britischen MOT-Prüfungen fielen 8,6% der Ford Transit Custom / Tourneo Custom wegen eines technischen oder Karosseriemangels durch. Median eines Transporters gleichen Alters und gleicher Laufleistung: 11,5%.
- Beste Baujahre
- 2018, 2019, 2020
- Baujahre mit den meisten Mängeln
- 2022
- Schwachstelle bei hoher Laufleistung
- Nichts fällt gegenüber der Klasse auf
- Amtliche Rückrufe
- 19 Rückrufe, davon 12 ernst
- Technische Mängelquote
- 8,6%
- Klassenmedian, gleiches Alter und gleiche Laufleistung
- 11,5%
- MOT-Prüfungen
- 156.185
- Beschwerden von US-Haltern
- 0
MOT-Ergebnisse nach Prüfjahr
Alle Fahrzeuge dieses Modells bei der Prüfung des jeweiligen Jahres im Vergleich mit der Klasse bei gleichem Alter und gleicher Laufleistung. Zeigt, ob das Modell mit dem Alter mithält.
| Prüfjahr | Prüfungen | Technische Mängel | Klassenmedian | Alle Mängel |
|---|---|---|---|---|
| 2024 | 156.185 | 8,6% | 11,5% | 22,5% |
| 2023 | 110.599 | 8,2% | 10,7% | 21,2% |
Mängelquote nach Jahr der Erstzulassung
Technische Mängelquote bei der MOT-Prüfung 2024 nach Jahr der Erstzulassung, verglichen mit dem Klassenmedian bei gleichem Alter und gleicher Laufleistung.
| Jahr | Prüfungen | Technische Mängel | Klassenmedian | Alle Mängel | Rückrufe |
|---|---|---|---|---|---|
| 2024 | 84 | 2,4% | 1,2% | 6,0% | 6 |
| 2023 | 224 | 1,3% | 3,0% | 5,4% | 4 |
| 2022 | 1.393 | 6,3% | 4,9% | 16,9% | 2 |
| 2021 | 44.302 | 7,6% | 8,9% | 23,7% | 4 |
| 2020 | 35.678 | 8,2% | 10,3% | 21,8% | 6 |
| 2019 | 44.384 | 8,5% | 13,0% | 21,4% | 6 |
| 2018 | 29.115 | 10,6% | 15,0% | 23,4% | 1 |
| 2017 | 300 | 17,0% | 18,5% | 28,3% | 2 |
| 2016 | 305 | 18,7% | 22,4% | 28,2% | 1 |
| 2015 | 202 | 28,2% | 24,8% | 36,1% | 0 |
| 2014 | 116 | 29,3% | 28,3% | 37,9% | 0 |
| 2013 | 53 | 26,4% | 31,8% | 41,5% | 0 |
Was nach Laufleistung ausfällt
Anteil der Prüfungen, die an der jeweiligen Baugruppe scheiterten. Verschleißteile (Lampen, Reifen, Wischer, Kennzeichen) zählen nicht zum Zuverlässigkeitswert.
(…) = Klassenmedian, gleiches Alter und gleiche Laufleistung
Checkliste für die Werkstatt vor dem Kauf
Abgeleitet aus den Baugruppen, bei denen dieses Modell ab 100.000 km häufiger durchfällt als seine Klasse, und aus offenen Rückrufen.
- Rückrufe: 5 ernste Rückrufe betreffen dieses Modell – lassen Sie sich die Erledigung nachweisen
- SR/02824/26 · 2024–2026 · A touch condition between the diesel fuel tank and the DCIV bulkhead bracket bolt may cause damage to the fuel tank over time and fuel to…
- SR/02314/26 · 2023–2025 · Cracks in the fuel line could lead to a fuel leak above the exhaust after-treatment systems. If the leaking fuel comes into contact with…
- SR/02057/26 · 2023–2026 · During installation of the high-security locks, metal shavings from the B-pillar may have damaged the seatbelt. This could reduce the…
- SR/00540/26 · 2025 · The weld seam on the seat frame is defective. In the event of an accident, a defective weld seam may result in insufficient restraining…
- SR/00252/26 · 2025 · The driver-side airbag inflator could rupture during deployment and not fully inflate. In addition, the release of high-pressured gas may…
Ein bestimmtes Auto per FIN auf den offiziellen Seiten prüfen: NHTSA (US) · DVSA (UK)
Amtliche Rückrufe
Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.
A touch condition between the diesel fuel tank and the DCIV bulkhead bracket bolt may cause damage to the fuel tank over time and fuel to leak onto hot engine or exhaust components. As a result, the leaking fuel may…
SR/02824/26 ↗Volltext
A touch condition between the diesel fuel tank and the DCIV bulkhead bracket bolt may cause damage to the fuel tank over time and fuel to leak onto hot engine or exhaust components. As a result, the leaking fuel may ignite and result in a fire.
Excessive gas emission has been identified in the affected 12V batteries. In the absence of a vent tube, hazardous gases such as hydrogen sulphide may enter the driver compartment from under the front seat, posing a…
SR/00932/26 ↗Volltext
Excessive gas emission has been identified in the affected 12V batteries. In the absence of a vent tube, hazardous gases such as hydrogen sulphide may enter the driver compartment from under the front seat, posing a risk of injuries.
Cracks in the fuel line could lead to a fuel leak above the exhaust after-treatment systems. If the leaking fuel comes into contact with hot components, it could ignite and cause a vehicle fire.
SR/02314/26 ↗During installation of the high-security locks, metal shavings from the B-pillar may have damaged the seatbelt. This could reduce the restraining effectiveness of the seatbelt in the event of an accident, increasing the…
SR/02057/26 ↗Volltext
During installation of the high-security locks, metal shavings from the B-pillar may have damaged the seatbelt. This could reduce the restraining effectiveness of the seatbelt in the event of an accident, increasing the risk of injury.
The weld seam on the seat frame is defective. In the event of an accident, a defective weld seam may result in insufficient restraining effect of the seatbelt, increasing the risk of injuries.
SR/00540/26 ↗The driver-side airbag inflator could rupture during deployment and not fully inflate. In addition, the release of high-pressured gas may propel pieces of the inflator and airbag module into the occupant compartment.…
SR/00252/26 ↗Volltext
The driver-side airbag inflator could rupture during deployment and not fully inflate. In addition, the release of high-pressured gas may propel pieces of the inflator and airbag module into the occupant compartment. This could increase the risk of injury.
13 weitere Rückrufe anzeigen
A wiring harness comes into contact with the brake lines. This may lead to wear, corrosion and a leak in the brake lines and to reduced braking performance, which may lead to an increased risk of accidents.
SR/02877/25 ↗The rear shock absorbers could break and impair driving stability, which could damage the rear brake line and/or cause a release of the coil spring. This increases the risk of accidents and injuries.
SR/03607/25 ↗A bent anode plate on the high-voltage battery cells could lead to a short circuit, consequently leading to engine failure and the shutdown of the battery, increasing the risk of fire.
SR/03119/25 ↗One or more bolts on the bottom cover of the power distribution board can break and may lead to various electrical malfunctions. This can lead to the vehicle catching fire due to an increased resistance.
SR/02574/25 ↗Some seat screws may not be properly tightened, leading the seat to become loose. This can make the restraining devices less effective, increasing the risk of injury.
SR/02169/25 ↗A faulty part within the high-voltage battery cells could cause the battery to short-circuit and cause a fire.
A12/02543/23 ↗Due to an error in the assembly process, there might be a single, loose screw in the steering support.The loose screw could cause a sudden, temporary blocking of the steering while the vehicle is in motion, increasing…
A12/00853/21 ↗Volltext
Due to an error in the assembly process, there might be a single, loose screw in the steering support.The loose screw could cause a sudden, temporary blocking of the steering while the vehicle is in motion, increasing the risk of an accident.
The weld penetration on the left-hand lower control arm does not meet specification.As a result, cracks can be formed on the control arm, increasing the risk of an accident.
A12/01358/20 ↗The lower control arms fitted to vehicles may have missing or partial welds. As a result, the control arms could break, increasing the risk of an accident.
A12/01205/20 ↗The fuse for the electronic Run On Water Pump (ROWP) is inadequate and will not prevent it from overheating in case of failure.This will lead to the melting of the pump body and wiring, increasing the risk of fire.
A12/00937/20 ↗The twin battery positive cable might have been wrongly fitted.Consequently, it could loose itself leading to a loss of engine power or even a localised overheating and melting of components, increasing the risk of…
A12/00508/20 ↗Volltext
The twin battery positive cable might have been wrongly fitted.Consequently, it could loose itself leading to a loss of engine power or even a localised overheating and melting of components, increasing the risk of accident or the vehicle catching fire.
The shoulder height adjuster bolt on the driver-side's front seatbelt may be incorrectly torqued. As a result, in the event of an accident, the seatbelt anchorage bolt may separate from the seatbelt shoulder height…
A12/0353/19 ↗Volltext
The shoulder height adjuster bolt on the driver-side's front seatbelt may be incorrectly torqued. As a result, in the event of an accident, the seatbelt anchorage bolt may separate from the seatbelt shoulder height adjuster, leading to injuries.
null The vehicles pose the risk of injuries because they have been fitted with a brake pedal pin retaining "R" clip which does not meet material specification. Spring tension of the clip will be reduced. As a result,…
A12/0290/13 ↗Volltext
null The vehicles pose the risk of injuries because they have been fitted with a brake pedal pin retaining "R" clip which does not meet material specification. Spring tension of the clip will be reduced. As a result, there is the possibility that the clip could come off, allowing the brake pedal to detach from the brake booster push rod. This would result in loss of brake actuation and could lead to an accident.