Transporter und Hochdachkombis
Renault Kangoo: Zuverlässigkeit
Bei 56.225 britischen MOT-Prüfungen fielen 33,3% der Renault Kangoo wegen eines technischen oder Karosseriemangels durch. Median eines Transporters gleichen Alters und gleicher Laufleistung: 26,8%.
- Beste Baujahre
- —
- Baujahre mit den meisten Mängeln
- 2013, 2014, 2018
- Schwachstelle bei hoher Laufleistung
- Lenkung, Fahrwerk und Räder, Bremsen
- Amtliche Rückrufe
- 12 Rückrufe, davon 1 ernst
- Technische Mängelquote
- 33,3%
- Klassenmedian, gleiches Alter und gleiche Laufleistung
- 26,8%
- MOT-Prüfungen
- 56.225
- Beschwerden von US-Haltern
- 0
MOT-Ergebnisse nach Prüfjahr
Alle Fahrzeuge dieses Modells bei der Prüfung des jeweiligen Jahres im Vergleich mit der Klasse bei gleichem Alter und gleicher Laufleistung. Zeigt, ob das Modell mit dem Alter mithält.
| Prüfjahr | Prüfungen | Technische Mängel | Klassenmedian | Alle Mängel |
|---|---|---|---|---|
| 2024 | 56.225 | 33,3% | 26,8% | 45,8% |
| 2023 | 59.043 | 33,1% | 26,8% | 46,0% |
Mängelquote nach Jahr der Erstzulassung
Technische Mängelquote bei der MOT-Prüfung 2024 nach Jahr der Erstzulassung, verglichen mit dem Klassenmedian bei gleichem Alter und gleicher Laufleistung.
| Jahr | Prüfungen | Technische Mängel | Klassenmedian | Alle Mängel | Rückrufe |
|---|---|---|---|---|---|
| 2021 | 1.914 | 8,8% | 7,4% | 24,8% | 1 |
| 2020 | 2.059 | 8,5% | 7,8% | 27,8% | 1 |
| 2019 | 3.200 | 14,0% | 11,3% | 33,1% | 2 |
| 2018 | 2.465 | 19,6% | 13,9% | 36,3% | 2 |
| 2017 | 2.438 | 22,9% | 18,6% | 40,2% | 0 |
| 2016 | 3.409 | 29,1% | 22,4% | 43,2% | 2 |
| 2015 | 4.005 | 32,9% | 25,3% | 46,0% | 1 |
| 2014 | 3.308 | 37,9% | 28,1% | 50,4% | 2 |
| 2013 | 2.325 | 40,4% | 30,3% | 51,8% | 4 |
| 2012 | 3.222 | 39,7% | 30,5% | 50,3% | 3 |
| 2011 | 5.230 | 41,5% | 31,9% | 51,7% | 2 |
| 2010 | 4.756 | 41,7% | 33,3% | 52,6% | 2 |
| 2009 | 2.125 | 39,3% | 31,8% | 49,9% | 2 |
| 2008 | 2.988 | 35,6% | 31,5% | 45,9% | 1 |
| 2007 | 3.229 | 38,9% | 32,0% | 49,1% | 1 |
| 2006 | 2.610 | 36,9% | 34,4% | 48,3% | 1 |
| 2005 | 2.289 | 42,0% | 36,3% | 51,0% | 1 |
| 2004 | 1.900 | 40,7% | 35,0% | 50,8% | 1 |
Was nach Laufleistung ausfällt
Anteil der Prüfungen, die an der jeweiligen Baugruppe scheiterten. Verschleißteile (Lampen, Reifen, Wischer, Kennzeichen) zählen nicht zum Zuverlässigkeitswert.
(…) = Klassenmedian, gleiches Alter und gleiche Laufleistung
Checkliste für die Werkstatt vor dem Kauf
Abgeleitet aus den Baugruppen, bei denen dieses Modell ab 100.000 km häufiger durchfällt als seine Klasse, und aus offenen Rückrufen.
- Lenkung: Spiel in Lenkgetriebe, Spurstangen und -köpfen, Undichtigkeiten der Servolenkung und Geräusche bei Volleinschlag prüfen.
- Fahrwerk und Räder: Querlenker, Buchsen, Traggelenke, Federn und Stoßdämpfer auf Spiel, Risse und Undichtigkeiten prüfen; auf ungleichmäßigen Reifenverschleiß achten.
- Bremsen: Scheiben und Beläge messen, Bremsleitungen und -schläuche auf Rost prüfen, Handbremse und ABS-Leuchte testen.
- Rückrufe: 1 ernste Rückrufe betreffen dieses Modell – lassen Sie sich die Erledigung nachweisen
- A12/0740/16 · 2015 · null The mounting screw of the rear left-hand seat belt return (second row seats) has been incorrectly tightened and could become loose,…
Ein bestimmtes Auto per FIN auf den offiziellen Seiten prüfen: NHTSA (US) · DVSA (UK)
Amtliche Rückrufe
Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.
The rear swing door strikes protrude when the doors are open, particularly during entry or exit at the rear of the vehicle, such as during loading or unloading operations. This may lead to the risk of head injury to…
SR/03092/25 ↗Volltext
The rear swing door strikes protrude when the doors are open, particularly during entry or exit at the rear of the vehicle, such as during loading or unloading operations. This may lead to the risk of head injury to users.
The front seat base frame is defective and the child seat restraint system malfunctions, increasing the risk of injury in the event of an accident.
A12/02475/23 ↗The components on the rear axle may not be sufficiently clamped. As a result, the rear wheels may become locked or disengaged, increasing the risk of an accident.
A12/00178/20 ↗The "Stop & Start" function might not properly work. Consequently, the engine might inadvertently remain running while the vehicle is stationary, increasing the risk of accidents.
A12/1729/19 ↗The catalytic converter has not been correctly welded. As a consequence, exhaust gas may leak into the engine compartment.
A12/2021/18 ↗null Fixing screws for the tension rods on the sub-frame are missing. As a result, there is a risk that the engine’s anti-intrusion bar will not properly protect the occupants in the event of a frontal collision.
A12/0764/17 ↗
6 weitere Rückrufe anzeigen
null Cracks in the casing of the steering column could lead to fatigue rupture of the casing. This could lead to the controls under the steering wheel (indicators, lights, wipers) becoming jammed and difficult to…
A12/0506/17 ↗Volltext
null Cracks in the casing of the steering column could lead to fatigue rupture of the casing. This could lead to the controls under the steering wheel (indicators, lights, wipers) becoming jammed and difficult to operate. In case of rupture due to bending in the event of an impact, it could affect the steering.
null The mounting screw of the rear left-hand seat belt return (second row seats) has been incorrectly tightened and could become loose, leading to a loss of protection in case of an impact.
A12/0740/16 ↗null The fixing bolts for the backrest on the second row of seats may break in the event of heavy braking or a collision. The occupants would consequently not be protected properly.
A12/0286/16 ↗null The third row seats may not lock properly when they are refitted by the user following their removal. This could lead to injuries in case of braking or an impact.
A12/1354/15 ↗null Due to a problem with the hand brake mechanism, the hand brake may disengage after it has been applied.
A12/2101/14 ↗null The ABS pipes on the hydraulic unit may be inverted. During heavy braking this could lead to:• underbraking of the front brakes and rear wheel lock,• underbraking of the rear brakes and front wheel lock,•…
A12/1413/14 ↗Volltext
null The ABS pipes on the hydraulic unit may be inverted. During heavy braking this could lead to:• underbraking of the front brakes and rear wheel lock,• underbraking of the rear brakes and front wheel lock,• malfunction of the ESP and increased oversteer or understeer,• non operation of the ESP.