AutoDefects
Deutsch

Transporter und Hochdachkombis

Vauxhall / Opel Vivaro: Zuverlässigkeit

Bei 183.397 britischen MOT-Prüfungen fielen 34,1% der Vauxhall / Opel Vivaro wegen eines technischen oder Karosseriemangels durch. Median eines Transporters gleichen Alters und gleicher Laufleistung: 26,2%.

50von 100Unterdurchschnittlich30% mehr technische Mängel als die Klasse
Beste Baujahre
2020
Baujahre mit den meisten Mängeln
2016, 2017, 2018
Schwachstelle bei hoher Laufleistung
Lenkung, Fahrwerk und Räder, Bremsen
Amtliche Rückrufe
32 Rückrufe, davon 10 ernst
Technische Mängelquote
34,1%
Klassenmedian, gleiches Alter und gleiche Laufleistung
26,2%
Erste Prüfung (3 Jahre), 2021
9,7% (8,8%)
MOT-Prüfungen
183.397
Beschwerden von US-Haltern
0

MOT-Ergebnisse nach Prüfjahr

Alle Fahrzeuge dieses Modells bei der Prüfung des jeweiligen Jahres im Vergleich mit der Klasse bei gleichem Alter und gleicher Laufleistung. Zeigt, ob das Modell mit dem Alter mithält.

PrüfjahrPrüfungenTechnische MängelKlassenmedianAlle Mängel
2024183.39734,1%26,2%43,3%
2023183.71334,1%26,5%43,2%

Mängelquote nach Jahr der Erstzulassung

Technische Mängelquote bei der MOT-Prüfung 2024 nach Jahr der Erstzulassung, verglichen mit dem Klassenmedian bei gleichem Alter und gleicher Laufleistung.

Dieses ModellKlassenmedian
0%18%35%2004: 43,6%2004 Klassenmedian: 39,7%042005: 43,1%2005 Klassenmedian: 41,8%2006: 45,6%2006 Klassenmedian: 40,1%062007: 44,9%2007 Klassenmedian: 37,8%2008: 44,6%2008 Klassenmedian: 38,3%082009: 45,3%2009 Klassenmedian: 36,9%2010: 48,1%2010 Klassenmedian: 36,2%102011: 45,7%2011 Klassenmedian: 34,9%2012: 44,4%2012 Klassenmedian: 33,9%122013: 41,8%2013 Klassenmedian: 31,5%2014: 39,1%2014 Klassenmedian: 28,8%142015: 36,4%2015 Klassenmedian: 25,9%2016: 32,7%2016 Klassenmedian: 22,5%162017: 31,5%2017 Klassenmedian: 19,1%2018: 25,6%2018 Klassenmedian: 14,6%182019: 16,5%2019 Klassenmedian: 13,0%2020: 9,3%2020 Klassenmedian: 10,6%202021: 9,7%2021 Klassenmedian: 8,8%2022: 4,4%2022 Klassenmedian: 3,8%222023: 0,9%2023 Klassenmedian: 2,4%
JahrPrüfungenTechnische MängelKlassenmedianAlle MängelRückrufe
20231070,9%2,4%4,7%3
20223414,4%3,8%15,5%8
202112.4589,7%8,8%25,2%8
202010.0329,3%10,6%25,8%5
20199.81516,5%13,0%27,8%7
201811.25625,6%14,6%33,2%3
201712.13931,5%19,1%38,0%2
201619.15032,7%22,5%40,4%3
201521.40236,4%25,9%42,7%4
201412.30039,1%28,8%48,0%2
20139.77541,8%31,5%51,2%1
20128.37744,4%33,9%53,6%0
201110.30845,7%34,9%54,5%0
20106.29748,1%36,2%56,0%0
20093.95745,3%36,9%54,1%0
20088.06644,6%38,3%53,2%0
20078.24744,9%37,8%53,9%0
20067.13245,6%40,1%54,9%0
20055.60643,1%41,8%51,8%0
20043.86643,6%39,7%52,5%0
Ältere Baujahre (3)
JahrPrüfungenTechnische MängelKlassenmedianAlle MängelRückrufe
20031.95943,3%40,7%51,1%0
200273145,4%38,8%52,0%0
20017335,6%36,7%38,4%0

Häufigste Mängel bei der Prüfung

Die Mängel, die Prüfer bei diesem Modell am häufigsten festgestellt haben, im Originalwortlaut der DVSA (Englisch), je 1.000 Prüfungen.

Mangel (DVSA-Wortlaut)BaugruppeJe 1.000 Prüfungen
Track rod end: ball joint has excessive playLenkung128,6
ball joint excessively wornFahrwerk und Räder67,2
Position lamp: not workingLicht und Elektrik (Verschleiß)63,6
Linkage ball joints: ball joint excessively wornFahrwerk und Räder56
Wipers: does not clear the windscreen effectivelyWischer und Scheibe (Verschleiß)53,3
Brake pads: less than 1.5 mm thickBremsen46,3
Rigid brake pipes: excessively corrodedBremsen46,2
Rbt (sp): efficiency below requirementsBremsen43,8
Registration plate lamp(s): inoperative in the case of a single lamp or all lampsLicht und Elektrik (Verschleiß)43,7
Stop lamp: not workingLicht und Elektrik (Verschleiß)42,9
Coil spring: fractured or brokenFahrwerk und Räder42,6
tread depth below requirements of 1.6mmReifen (Verschleiß)35,9
Malfunction indicator lamp: inoperative or indicates a malfunctionMotor, Abgasanlage und Emissionen31,8
Joints: constant velocity boot split or insecure, no longer prevents the ingress of dirtKarosserie, Rahmen und Rost31
Shock absorbers: has a serious fluid leakFahrwerk und Räder30,1

Was nach Laufleistung ausfällt

Anteil der Prüfungen, die an der jeweiligen Baugruppe scheiterten. Verschleißteile (Lampen, Reifen, Wischer, Kennzeichen) zählen nicht zum Zuverlässigkeitswert.

Baugruppe0-50k km50-100k km100-150k km150k+ km
Technische Mängel8,6% (5,8)18,7% (13,2)30,3% (21,1)41,5% (33,1)
Prüfungen7.75530.14937.482108.011
Fahrwerk und Räder2,2% (1,3)8,2% (4,7)16,5% (9,4)25,3% (16,2)
Bremsen3,8% (2,8)6,9% (6,5)9,2% (8,2)18,6% (13,8)
Motor, Abgasanlage und Emissionen2,1% (1,2)3,2% (2,1)4,7% (3,2)6,2% (5,6)
Lenkung0,5% (0,2)4,4% (0,6)11,0% (1,6)14,7% (3,2)
Karosserie, Rahmen und Rost0,9% (0,9)1,6% (2,9)3,2% (5,5)7,1% (9,2)
Gurte und Airbags0,6% (0,6)0,6% (0,7)1,0% (1,2)3,0% (2,4)
Licht und Elektrik (Verschleiß)6,7% (5,6)10,2% (10,5)13,5% (16,6)24,1% (22,7)
Reifen (Verschleiß)3,0% (3,2)4,7% (5,1)5,7% (5,7)6,7% (6,6)
Wischer und Scheibe (Verschleiß)5,8% (4,5)6,8% (5,9)6,2% (6,5)9,1% (7,9)
Sonstiges und Kennzeichen (Verschleiß)0,2% (0,2)0,3% (0,2)0,5% (0,4)0,9% (0,5)

(…) = Klassenmedian, gleiches Alter und gleiche Laufleistung

Checkliste für die Werkstatt vor dem Kauf

Abgeleitet aus den Baugruppen, bei denen dieses Modell ab 100.000 km häufiger durchfällt als seine Klasse, und aus offenen Rückrufen.

  1. Lenkung: Spiel in Lenkgetriebe, Spurstangen und -köpfen, Undichtigkeiten der Servolenkung und Geräusche bei Volleinschlag prüfen.
  2. Fahrwerk und Räder: Querlenker, Buchsen, Traggelenke, Federn und Stoßdämpfer auf Spiel, Risse und Undichtigkeiten prüfen; auf ungleichmäßigen Reifenverschleiß achten.
  3. Bremsen: Scheiben und Beläge messen, Bremsleitungen und -schläuche auf Rost prüfen, Handbremse und ABS-Leuchte testen.
  4. Rückrufe: 5 ernste Rückrufe betreffen dieses Modell – lassen Sie sich die Erledigung nachweisen
    • SR/01582/26 · 2025, 2026 · The starter body may contact the battery’s positive cable due to insufficient cable protection. This could cause an electric arc or short…
    • SR/03913/25 · 2021–2023 · A hydrogen leak can occur between the tank’s outer cover and the protective lining. If the vehicle’s hydrogen sensors detect the leak while…
    • A12/03104/24 · 2024 · Radio screens can be insufficiently fixed in place. In the event of an accident, the screen can come loose and cause injuries to the…
    • A12/01789/24 · 2023, 2024 · The ground connections can come loose, which can result in the loss of several vehicle functions and lead to unintentional acceleration or…
    • A12/00992/23 · 2022 · The left track rod of the steering assembly is attached with incorrect torque. This may cause the connection to fail and could result in a…

    Ein bestimmtes Auto per FIN auf den offiziellen Seiten prüfen: NHTSA (US) · DVSA (UK)

Amtliche Rückrufe

Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.

  • EU Safety GateErnst2025, 2026

    The starter body may contact the battery’s positive cable due to insufficient cable protection. This could cause an electric arc or short circuit, leading to smoke from the engine compartment and a fire.

    SR/01582/26 ↗
  • EU Safety GateErnst2021–2023

    A hydrogen leak can occur between the tank’s outer cover and the protective lining. If the vehicle’s hydrogen sensors detect the leak while driving, the fuel-cell system will shut off. The vehicle will then only run in…

    Volltext

    A hydrogen leak can occur between the tank’s outer cover and the protective lining. If the vehicle’s hydrogen sensors detect the leak while driving, the fuel-cell system will shut off. The vehicle will then only run in electric (battery) mode, with a very limited range of about 30 km and no ability to recharge hydrogen on board.If the vehicle is parked, the hydrogen sensors do not operate. In this case, hydrogen could build up under the vehicle which increases the risk of hydrogen catching fire.

    SR/03913/25 ↗
  • EU Safety Gate2025

    The rear brake discs do not have sufficient contact with the wheel hub, resulting in an abnormal concentration of stress on them. This might cause cracks and a reduced transmission of torque, resulting in the loosening…

    Volltext

    The rear brake discs do not have sufficient contact with the wheel hub, resulting in an abnormal concentration of stress on them. This might cause cracks and a reduced transmission of torque, resulting in the loosening of the wheel bolts, leading to an increased risk of a wheel becoming detached from the vehicle. Moreover, a crack that forms a groove in the surface of a brake disc might impair the braking function, increasing the risk of injuries.

    SR/03548/25 ↗
  • EU Safety Gate2020–2022

    The fixing bolts and the hinge on the vehicle’s front control arms may break due to corrosion. This can cause the vehicle to steer in an unpredictable way, increasing the risk of injuries.

    SR/03235/25 ↗
  • EU Safety Gate2017–2046

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…

    Volltext

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.

    SR/03207/25 ↗
  • EU Safety Gate2024, 2025

    The shock absorber attached to the body has been mounted with an insufficient tightening torque (measured value: 90 Nm). This can result in the attachment breaking and in a loss of the vehicle's control, increasing the…

    Volltext

    The shock absorber attached to the body has been mounted with an insufficient tightening torque (measured value: 90 Nm). This can result in the attachment breaking and in a loss of the vehicle's control, increasing the risk of accident and injuries.

    SR/01294/25 ↗
26 weitere Rückrufe anzeigen
  • EU Safety Gate2024

    An insufficiently resistant seat fixation on the first- and/or second row can lead to a seat movement in the event of an accident. This increases the risk of injuries to the occupants.

    A12/03525/24 ↗
  • EU Safety GateErnst2024

    Radio screens can be insufficiently fixed in place. In the event of an accident, the screen can come loose and cause injuries to the occupants and/or damage to the airbag when it is deployed.

    A12/03104/24 ↗
  • EU Safety Gate2024

    Incorrectly fitted rear axle suspension springs can lead to a loss of vehicle handling and the spring may come free from its support. The spring can fall onto the road whilst driving, posing a risk of accident and…

    Volltext

    Incorrectly fitted rear axle suspension springs can lead to a loss of vehicle handling and the spring may come free from its support. The spring can fall onto the road whilst driving, posing a risk of accident and injuries to the following traffic.

    A12/03011/24 ↗
  • EU Safety GateErnst2023, 2024

    The ground connections can come loose, which can result in the loss of several vehicle functions and lead to unintentional acceleration or the vehicle catching fire.

    A12/01789/24 ↗
  • EU Safety GateErnst2022

    The left track rod of the steering assembly is attached with incorrect torque. This may cause the connection to fail and could result in a loss of steering, increasing the risk of an accident.

    A12/00992/23 ↗
  • EU Safety GateErnst2020–2022

    The fuel line may come into contact with the bodywork and plastic parts. This can lead to fuel leakage with the result that the vehicle loses road contact or other road users close to the vehicle could slip, increasing…

    Volltext

    The fuel line may come into contact with the bodywork and plastic parts. This can lead to fuel leakage with the result that the vehicle loses road contact or other road users close to the vehicle could slip, increasing the risk of an accident.

    A12/00096/23 ↗
  • EU Safety GateErnst2022

    The screws in the vehicle steering box may have been improperly tightened, which can result in a loss of steering control, increasing the risk of an accident.

    A12/01510/22 ↗
  • EU Safety Gate2022

    The rear brake may be defective, reducing the service brake performance, increasing the risk of an accident.

    A12/01313/22 ↗
  • EU Safety GateErnst2022

    Improper high voltage wiring harness could cause temperature rise and burning of contacts inside the connector. This defect can cause significant damage to the power supply system, increasing the risk of fire.

    A12/01351/22 ↗
  • EU Safety Gate2021

    The locking mechanism of the front headrests to the seats may be missing and could eject in the event of a collision, increasing the risk of injury.

    A12/00845/22 ↗
  • EU Safety Gate2021

    The manufacturer's VIN (Vehicle Identification Number) label displays an incorrect weight. This may lead to an accident if more than the maximum allowable weight is towed.

    A12/00412/22 ↗
  • EU Safety Gate2019

    The bolting of the rear axle can be defective.This may lead to a loss of driving stability, increasing the risk of an accident.

    A12/00157/20 ↗
  • EU Safety Gate2021

    The centring pin for the rear suspension spring may not be properly welded. This could lead to the rear suspension spring being detached, increasing the risk of an accident. The product does not meet the requirements…

    Volltext

    The centring pin for the rear suspension spring may not be properly welded. This could lead to the rear suspension spring being detached, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01194/21 ↗
  • EU Safety Gate2021

    Due to a manufacturing defect, the wheel bolts may be tightened with incorrect torque. This could lead to the detachment of a wheel, increasing the risk of an accident.

    A12/00629/21 ↗
  • EU Safety Gate2019, 2020

    The wheel screws are not tightened with the required torque. This could lead to a wheel being lost during driving, increasing the risk of an accident.

    A12/00135/21 ↗
  • EU Safety Gate2019, 2020

    The seat locking mechanism may not engage. This may increase the risk of injury in the event of an accident.

    A12/00003/21 ↗
  • EU Safety Gate2019

    There is an increased risk of leak in the fuel line. Fuel may escape and ignitie, as well as leak into the road, causing a risk to trafic.

    A12/00348/20 ↗
  • EU Safety GateErnst2019

    Water may leak into the vehicle's interior. Consequently, the proper functioning of the airbags can be impaired, increasing the risk of injury in the event of an accident.

    A12/00363/20 ↗
  • EU Safety GateErnst2019

    Water may leak into the vehicle interior. This can impair the proper functioning of the airbags, increasing the risk of injury in the event of an accident.

    A12/00191/20 ↗
  • EU Safety Gate2018

    The handbrake cable and adjustment screw may be defective. This can impair the handbrake holding function, increasing the risk of an accident.

    A12/0724/19 ↗
  • EU Safety Gate2017, 2018

    Some components of the strap guiding rail may not have been accurately produced. As a consequence, the protective function of the safety belt in the third row of seats may not be guaranteed.

    A12/1652/18 ↗
  • EU Safety Gate2013–2016

    null The track rod may not be mounted correctly which could affect the handling of the vehicle.

    A12/0067/17 ↗
  • EU Safety Gate2015, 2016

    null The tightening torque of the bonnet primary latch striker bolts might be incorrect. This could lead to the bonnet not locking. An accident could arise if the bonnet consequently opened whilst driving.

    A12/1067/16 ↗
  • EU Safety Gate2015, 2016

    null Due to insufficient tightening torque of the bonnet's primary latch bolts, the bonnet may unlock unexpectedly while driving.

    A12/0177/16 ↗
  • EU Safety Gate2015

    null There may be contact between the main wiring and the windscreen wipers mechanism which might cause the engine to fail to start or the windscreen wipers to stop unexpectedly. Insufficient tightening of the bolt and…

    Volltext

    null There may be contact between the main wiring and the windscreen wipers mechanism which might cause the engine to fail to start or the windscreen wipers to stop unexpectedly. Insufficient tightening of the bolt and nut in the lower suspension arm may affect the steering when the vehicle is being driven.The hand brake cable may detach causing the hand brake to not work.

    A12/0494/15 ↗
  • EU Safety Gate2014

    null The seat mounting might fail in the event of an accident.

    A12/0302/15 ↗