Transporter und Hochdachkombis
Peugeot Partner / Rifter: Zuverlässigkeit
Bei 162.004 britischen MOT-Prüfungen fielen 21,8% der Peugeot Partner / Rifter wegen eines technischen oder Karosseriemangels durch. Median eines Transporters gleichen Alters und gleicher Laufleistung: 22,0%.
- Beste Baujahre
- 2006, 2012, 2020
- Baujahre mit den meisten Mängeln
- 2018, 2022
- Schwachstelle bei hoher Laufleistung
- Nichts fällt gegenüber der Klasse auf
- Amtliche Rückrufe
- 29 Rückrufe, davon 12 ernst
- Technische Mängelquote
- 21,8%
- Klassenmedian, gleiches Alter und gleiche Laufleistung
- 22,0%
- MOT-Prüfungen
- 162.004
- Beschwerden von US-Haltern
- 0
MOT-Ergebnisse nach Prüfjahr
Alle Fahrzeuge dieses Modells bei der Prüfung des jeweiligen Jahres im Vergleich mit der Klasse bei gleichem Alter und gleicher Laufleistung. Zeigt, ob das Modell mit dem Alter mithält.
| Prüfjahr | Prüfungen | Technische Mängel | Klassenmedian | Alle Mängel |
|---|---|---|---|---|
| 2024 | 162.004 | 21,8% | 22,0% | 36,8% |
| 2023 | 158.269 | 21,7% | 21,8% | 37,0% |
Mängelquote nach Jahr der Erstzulassung
Technische Mängelquote bei der MOT-Prüfung 2024 nach Jahr der Erstzulassung, verglichen mit dem Klassenmedian bei gleichem Alter und gleicher Laufleistung.
| Jahr | Prüfungen | Technische Mängel | Klassenmedian | Alle Mängel | Rückrufe |
|---|---|---|---|---|---|
| 2022 | 525 | 4,2% | 3,4% | 9,7% | 5 |
| 2021 | 12.847 | 8,4% | 8,6% | 26,1% | 8 |
| 2020 | 13.211 | 7,7% | 9,3% | 22,6% | 9 |
| 2019 | 16.704 | 11,2% | 12,0% | 25,1% | 11 |
| 2018 | 14.643 | 16,8% | 14,5% | 34,1% | 10 |
| 2017 | 13.984 | 20,1% | 18,7% | 37,7% | 11 |
| 2016 | 13.357 | 23,5% | 22,0% | 39,1% | 11 |
| 2015 | 13.247 | 23,0% | 24,3% | 37,7% | 8 |
| 2014 | 14.038 | 26,5% | 28,0% | 41,6% | 8 |
| 2013 | 9.503 | 29,8% | 30,4% | 46,2% | 8 |
| 2012 | 11.548 | 27,0% | 31,1% | 39,5% | 7 |
| 2011 | 6.951 | 34,1% | 33,6% | 47,8% | 7 |
| 2010 | 5.147 | 33,2% | 34,4% | 47,3% | 7 |
| 2009 | 3.852 | 36,0% | 34,7% | 49,5% | 7 |
| 2008 | 2.866 | 37,0% | 35,4% | 49,8% | 8 |
| 2007 | 2.374 | 35,9% | 35,3% | 47,7% | 1 |
| 2006 | 2.082 | 35,5% | 37,9% | 47,5% | 1 |
| 2005 | 1.617 | 39,5% | 39,2% | 50,5% | 1 |
| 2004 | 1.256 | 38,2% | 37,7% | 48,1% | 0 |
Was nach Laufleistung ausfällt
Anteil der Prüfungen, die an der jeweiligen Baugruppe scheiterten. Verschleißteile (Lampen, Reifen, Wischer, Kennzeichen) zählen nicht zum Zuverlässigkeitswert.
(…) = Klassenmedian, gleiches Alter und gleiche Laufleistung
Checkliste für die Werkstatt vor dem Kauf
Abgeleitet aus den Baugruppen, bei denen dieses Modell ab 100.000 km häufiger durchfällt als seine Klasse, und aus offenen Rückrufen.
- Rückrufe: 5 ernste Rückrufe betreffen dieses Modell – lassen Sie sich die Erledigung nachweisen
- SR/01169/26 · 2025 · In vehicles fitted with a DV5 diesel engine, the NOx sensor may not have been properly tightened during installation. This may allow…
- SR/00360/26 · 2025 · Vehicles fitted with a DV5R engine may experience a fuel leak. The non-conformity of the round shape on the cone of the common rail may…
- SR/00176/26 · 2023–2025 · Incorrect wheel bolts have been fitted and may loosen or detach, resulting in wheel detachment and increasing the risk of accidents and…
- A12/03223/24 · 2024 · Due to excessive stress applied during the manufacturing process the front brake discs can be defective. This can lead to a disc breakage,…
- A12/00043/22 · 2017–2021 · The electrical supply to and software for the additional heating is not correctly designed and the heater can shut off too soon when the…
Ein bestimmtes Auto per FIN auf den offiziellen Seiten prüfen: NHTSA (US) · DVSA (UK)
Amtliche Rückrufe
Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.
In vehicles fitted with a DV5 diesel engine, the NOx sensor may not have been properly tightened during installation. This may allow exhaust gases to enter the engine compartment and could result in visible exhaust…
SR/01169/26 ↗Volltext
In vehicles fitted with a DV5 diesel engine, the NOx sensor may not have been properly tightened during installation. This may allow exhaust gases to enter the engine compartment and could result in visible exhaust fumes around the engine area, overheating of nearby components, a risk of fire and increased NOx emissions.
Vehicles without a bulkhead were manufactured and supplied with a single instead of a double seatback. There is a risk of excessive movement of the seatback in the event of a rear-end collision, which could result in…
SR/01174/26 ↗Volltext
Vehicles without a bulkhead were manufactured and supplied with a single instead of a double seatback. There is a risk of excessive movement of the seatback in the event of a rear-end collision, which could result in the driver being thrown out and injuries.
The DV5R engine may experience a loss of power due to slippage of the water pump pulley. This slippage can cause misalignment of the timing belt, potentially resulting in engine shutdown. The sprocket of the water pump…
SR/00970/26 ↗Volltext
The DV5R engine may experience a loss of power due to slippage of the water pump pulley. This slippage can cause misalignment of the timing belt, potentially resulting in engine shutdown. The sprocket of the water pump pulley may detach from the shaft, which can lead to the loss of parts on the road and increase the risk of accidents and injuries.
Vehicles fitted with a DV5R engine may experience a fuel leak. The non-conformity of the round shape on the cone of the common rail may cause the nut to loosen, resulting in the possibility of fuel leaking between the…
SR/00360/26 ↗Volltext
Vehicles fitted with a DV5R engine may experience a fuel leak. The non-conformity of the round shape on the cone of the common rail may cause the nut to loosen, resulting in the possibility of fuel leaking between the nut and the thread, leading to fuel vapours and fuel flow into the hot exhaust system. This may lead to a fire under the bonnet.
Incorrect wheel bolts have been fitted and may loosen or detach, resulting in wheel detachment and increasing the risk of accidents and injuries.
SR/00176/26 ↗The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…
SR/03153/25 ↗Volltext
The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.
23 weitere Rückrufe anzeigen
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…
SR/02658/25 ↗Volltext
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.
The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started,…
SR/01450/25 ↗Volltext
The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started, to an acceleration power's loss and to the engine suddenly cutting out while driving. This increases the risk of accidents and injuries.
Due to excessive stress applied during the manufacturing process the front brake discs can be defective. This can lead to a disc breakage, causing a loss of braking performance, increasing the risk of accidents and…
A12/03223/24 ↗Volltext
Due to excessive stress applied during the manufacturing process the front brake discs can be defective. This can lead to a disc breakage, causing a loss of braking performance, increasing the risk of accidents and injuries to the vehicle occupants and bystanders.
When there is a specific error in the vacuum circuit and after 6 seconds with the brake applied, the electronic control unit send an "Invalid Value" to the hydraulic brake compensation (HBC). This can cause the HBC to…
A12/03179/24 ↗Volltext
When there is a specific error in the vacuum circuit and after 6 seconds with the brake applied, the electronic control unit send an "Invalid Value" to the hydraulic brake compensation (HBC). This can cause the HBC to stop functioning, leading to a reduction in braking efficiency. This increases the risk of accidents and injuries.
In certain vehicles fitted with the DV5R E6.3 engine, the nitrogen oxide (NOx) emissions are above the regulatory limits. Excessive NOx emissions pose a risk to the environment.
A12/02824/24 ↗A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.
A12/01870/23 ↗The electrical supply to and software for the additional heating is not correctly designed and the heater can shut off too soon when the vehicle is switched off. This can lead to fuel remaining in the heater, producing…
A12/00043/22 ↗Volltext
The electrical supply to and software for the additional heating is not correctly designed and the heater can shut off too soon when the vehicle is switched off. This can lead to fuel remaining in the heater, producing smoke and fuel leaks increasing the risk of fire.
Due to cabling and software upgrade issues, fuel may leak. Leaking fuel increases the risk of fire
A12/01845/21 ↗The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of…
A12/01184/21 ↗Volltext
The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The clipping of the control button of the hand-brake restraint system might be incorrect. Consequently, the hand-brake might not be correctly engaged when used, leading to the vehicle to spontaneously move when parked,…
A12/00789/21 ↗Volltext
The clipping of the control button of the hand-brake restraint system might be incorrect. Consequently, the hand-brake might not be correctly engaged when used, leading to the vehicle to spontaneously move when parked, increasing the risk of accident or injuries to by-passers.
The vacuum pump may be damaged due to material abrasion of the cog belt.As a result, the braking assistance could be reduced or lost, increasing the risk of an accident.
A12/01505/20 ↗The high-pressure pump has not been tightened to the engine with the correct torque. As a result, fuel may leak onto the road, posing a risk to the following traffic.
A12/01462/20 ↗The track rods may be damaged when they are under load. This may result in a loss of driving stability, increasing the risk of an accident.
A12/01159/20 ↗The front passenger seatbelt is defective. As a result, its restraining function will be impaired, increasing the risk of injury in the event of an accident.
A12/00342/20 ↗The steering column may not have been manufactured in accordance with the specification.This may result in steering failure and, consequently, loss of control over the vehicle, increasing the risk of an accident.
A12/00009/20 ↗Possible misalignment of the ratchet on the handbrake lever latching mechanism. As a result the handbrake may not engage or could disengage by itself, increasing the risk of an accident.
A12/0926/19 ↗The airbag control units might have received a shock during transportation to the vehicle assembly plant, which might cause an internal fault. In the event of an accident, the airbags might not work correctly.
A12/0777/18 ↗null Premature ageing of the tyres could lead to loss of tyre pressure.
A12/0899/17 ↗null A problem with a component of the gearbox actuator could prevent gear changing or cause the driver to change to the wrong gear. This could lead to the vehicle moving in the opposite direction to that intended by…
A12/0479/17 ↗Volltext
null A problem with a component of the gearbox actuator could prevent gear changing or cause the driver to change to the wrong gear. This could lead to the vehicle moving in the opposite direction to that intended by the driver.
null A non-conformity in the bonnet catch could lead to the bonnet opening during driving which could lead to an accident.
A12/1380/16 ↗null Due to a possible failure of one of the components of the airbag, the driver's airbag may not deploy properly in the event of an accident.
A12/1012/16 ↗null The products pose a risk of injuries because the fixing bolts of the front seat belt return rails may loosen. The belt could thus not function properly in cases of accidents or sudden braking.
A12/0620/13 ↗null Owing to a non-compliant safety device, the electrical circuit of the engine fan may be insufficiently protected. If the fan becomes obstructed, localised heating of the electrical circuit may occur. There is a…
A12/1905/12 ↗Volltext
null Owing to a non-compliant safety device, the electrical circuit of the engine fan may be insufficiently protected. If the fan becomes obstructed, localised heating of the electrical circuit may occur. There is a risk that the vehicle could catch fire even once the engine has been switched off.