AutoDefects
Español

Furgonetas

Fiabilidad del Vauxhall / Opel Vivaro

En 183.397 inspecciones MOT británicas, el 34,1 % de los Vauxhall / Opel Vivaro no pasó por un defecto mecánico o estructural. La mediana de un furgoneta con la misma edad y kilometraje: 26,2 %.

50de 100Por debajo de la media30 % más fallos mecánicos que su clase
Mejores años
2020
Años con más fallos
2016, 2017, 2018
Punto débil con kilometraje alto
Dirección, Suspensión y ruedas, Frenos
Llamadas a revisión oficiales
32 llamadas a revisión, 10 graves
Tasa de fallo mecánico
34,1%
Mediana de la clase, misma edad y kilometraje
26,2%
Primera inspección (3 años), 2021
9,7% (8,8%)
inspecciones MOT
183.397
Quejas en EE. UU.
0

Resultados MOT por año de inspección

Toda la flota de este modelo en la inspección de cada año, frente a su clase con la misma edad y kilometraje. Muestra si el modelo mantiene su nivel al envejecer.

Año de inspecciónInspeccionesFallo mecánicoMediana de la claseCualquier fallo
2024183.39734,1%26,2%43,3%
2023183.71334,1%26,5%43,2%

Tasa de fallo por año de primera matriculación

Tasa de fallo mecánico en la MOT de 2024 según el año de primera matriculación, frente a la mediana de su clase con la misma edad y kilometraje.

Este modeloMediana de la clase
0%18%35%2004: 43,6%2004 Mediana de la clase: 39,7%042005: 43,1%2005 Mediana de la clase: 41,8%2006: 45,6%2006 Mediana de la clase: 40,1%062007: 44,9%2007 Mediana de la clase: 37,8%2008: 44,6%2008 Mediana de la clase: 38,3%082009: 45,3%2009 Mediana de la clase: 36,9%2010: 48,1%2010 Mediana de la clase: 36,2%102011: 45,7%2011 Mediana de la clase: 34,9%2012: 44,4%2012 Mediana de la clase: 33,9%122013: 41,8%2013 Mediana de la clase: 31,5%2014: 39,1%2014 Mediana de la clase: 28,8%142015: 36,4%2015 Mediana de la clase: 25,9%2016: 32,7%2016 Mediana de la clase: 22,5%162017: 31,5%2017 Mediana de la clase: 19,1%2018: 25,6%2018 Mediana de la clase: 14,6%182019: 16,5%2019 Mediana de la clase: 13,0%2020: 9,3%2020 Mediana de la clase: 10,6%202021: 9,7%2021 Mediana de la clase: 8,8%2022: 4,4%2022 Mediana de la clase: 3,8%222023: 0,9%2023 Mediana de la clase: 2,4%
AñoInspeccionesFallo mecánicoMediana de la claseCualquier falloLlamadas
20231070,9%2,4%4,7%3
20223414,4%3,8%15,5%8
202112.4589,7%8,8%25,2%8
202010.0329,3%10,6%25,8%5
2019981516,5%13,0%27,8%7
201811.25625,6%14,6%33,2%3
201712.13931,5%19,1%38,0%2
201619.15032,7%22,5%40,4%3
201521.40236,4%25,9%42,7%4
201412.30039,1%28,8%48,0%2
2013977541,8%31,5%51,2%1
2012837744,4%33,9%53,6%0
201110.30845,7%34,9%54,5%0
2010629748,1%36,2%56,0%0
2009395745,3%36,9%54,1%0
2008806644,6%38,3%53,2%0
2007824744,9%37,8%53,9%0
2006713245,6%40,1%54,9%0
2005560643,1%41,8%51,8%0
2004386643,6%39,7%52,5%0
Años anteriores (3)
AñoInspeccionesFallo mecánicoMediana de la claseCualquier falloLlamadas
2003195943,3%40,7%51,1%0
200273145,4%38,8%52,0%0
20017335,6%36,7%38,4%0

Fallos más frecuentes en la inspección

Los defectos que los inspectores registraron con más frecuencia en este modelo, con la redacción original de la DVSA (en inglés), por cada 1.000 inspecciones.

Defecto (redacción DVSA)SistemaPor 1.000 inspecciones
Track rod end: ball joint has excessive playDirección128,6
ball joint excessively wornSuspensión y ruedas67,2
Position lamp: not workingLuces y electricidad (desgaste)63,6
Linkage ball joints: ball joint excessively wornSuspensión y ruedas56
Wipers: does not clear the windscreen effectivelyEscobillas y parabrisas (desgaste)53,3
Brake pads: less than 1.5 mm thickFrenos46,3
Rigid brake pipes: excessively corrodedFrenos46,2
Rbt (sp): efficiency below requirementsFrenos43,8
Registration plate lamp(s): inoperative in the case of a single lamp or all lampsLuces y electricidad (desgaste)43,7
Stop lamp: not workingLuces y electricidad (desgaste)42,9
Coil spring: fractured or brokenSuspensión y ruedas42,6
tread depth below requirements of 1.6mmNeumáticos (desgaste)35,9
Malfunction indicator lamp: inoperative or indicates a malfunctionMotor, escape y emisiones31,8
Joints: constant velocity boot split or insecure, no longer prevents the ingress of dirtCarrocería, bastidor y corrosión31
Shock absorbers: has a serious fluid leakSuspensión y ruedas30,1

Qué falla según el kilometraje

Porcentaje de inspecciones suspendidas en cada sistema. Los elementos de desgaste (bombillas, neumáticos, escobillas, matrículas) no cuentan para el índice.

Sistema0-50k km50-100k km100-150k km150k+ km
Fallo mecánico8,6% (5,8)18,7% (13,2)30,3% (21,1)41,5% (33,1)
Inspecciones775530.14937.482108.011
Suspensión y ruedas2,2% (1,3)8,2% (4,7)16,5% (9,4)25,3% (16,2)
Frenos3,8% (2,8)6,9% (6,5)9,2% (8,2)18,6% (13,8)
Motor, escape y emisiones2,1% (1,2)3,2% (2,1)4,7% (3,2)6,2% (5,6)
Dirección0,5% (0,2)4,4% (0,6)11,0% (1,6)14,7% (3,2)
Carrocería, bastidor y corrosión0,9% (0,9)1,6% (2,9)3,2% (5,5)7,1% (9,2)
Cinturones y airbags0,6% (0,6)0,6% (0,7)1,0% (1,2)3,0% (2,4)
Luces y electricidad (desgaste)6,7% (5,6)10,2% (10,5)13,5% (16,6)24,1% (22,7)
Neumáticos (desgaste)3,0% (3,2)4,7% (5,1)5,7% (5,7)6,7% (6,6)
Escobillas y parabrisas (desgaste)5,8% (4,5)6,8% (5,9)6,2% (6,5)9,1% (7,9)
Otros y matrículas (desgaste)0,2% (0,2)0,3% (0,2)0,5% (0,4)0,9% (0,5)

(…) = Mediana de la clase, misma edad y kilometraje

Lista de comprobación para el mecánico antes de comprar

Basada en los sistemas en los que este modelo falla más que su clase a partir de 100.000 km y en las llamadas a revisión abiertas.

  1. Dirección: holgura de cremallera, bieletas y rótulas, fugas de la asistencia y ruidos con el volante a tope.
  2. Suspensión y ruedas: revisar brazos, silentblocks, rótulas, muelles y amortiguadores (holguras, grietas, fugas); buscar desgaste irregular de neumáticos.
  3. Frenos: medir discos y pastillas, revisar la corrosión de tubos y latiguillos, el freno de mano y el testigo ABS.
  4. Llamadas a revisión: 5 graves afectan a este modelo; pide prueba de que se hicieron
    • SR/01582/26 · 2025, 2026 · The starter body may contact the battery’s positive cable due to insufficient cable protection. This could cause an electric arc or short…
    • SR/03913/25 · 2021–2023 · A hydrogen leak can occur between the tank’s outer cover and the protective lining. If the vehicle’s hydrogen sensors detect the leak while…
    • A12/03104/24 · 2024 · Radio screens can be insufficiently fixed in place. In the event of an accident, the screen can come loose and cause injuries to the…
    • A12/01789/24 · 2023, 2024 · The ground connections can come loose, which can result in the loss of several vehicle functions and lead to unintentional acceleration or…
    • A12/00992/23 · 2022 · The left track rod of the steering assembly is attached with incorrect torque. This may cause the connection to fail and could result in a…

    Comprueba un coche concreto por su VIN en las webs oficiales: NHTSA (US) · DVSA (UK)

Llamadas a revisión oficiales

Campañas publicadas por la NHTSA (EE. UU.) y el EU Safety Gate que citan este modelo. Comprueba por VIN si afecta a un coche concreto.

  • EU Safety GateGrave2025, 2026

    The starter body may contact the battery’s positive cable due to insufficient cable protection. This could cause an electric arc or short circuit, leading to smoke from the engine compartment and a fire.

    SR/01582/26 ↗
  • EU Safety GateGrave2021–2023

    A hydrogen leak can occur between the tank’s outer cover and the protective lining. If the vehicle’s hydrogen sensors detect the leak while driving, the fuel-cell system will shut off. The vehicle will then only run in…

    Texto completo

    A hydrogen leak can occur between the tank’s outer cover and the protective lining. If the vehicle’s hydrogen sensors detect the leak while driving, the fuel-cell system will shut off. The vehicle will then only run in electric (battery) mode, with a very limited range of about 30 km and no ability to recharge hydrogen on board.If the vehicle is parked, the hydrogen sensors do not operate. In this case, hydrogen could build up under the vehicle which increases the risk of hydrogen catching fire.

    SR/03913/25 ↗
  • EU Safety Gate2025

    The rear brake discs do not have sufficient contact with the wheel hub, resulting in an abnormal concentration of stress on them. This might cause cracks and a reduced transmission of torque, resulting in the loosening…

    Texto completo

    The rear brake discs do not have sufficient contact with the wheel hub, resulting in an abnormal concentration of stress on them. This might cause cracks and a reduced transmission of torque, resulting in the loosening of the wheel bolts, leading to an increased risk of a wheel becoming detached from the vehicle. Moreover, a crack that forms a groove in the surface of a brake disc might impair the braking function, increasing the risk of injuries.

    SR/03548/25 ↗
  • EU Safety Gate2020–2022

    The fixing bolts and the hinge on the vehicle’s front control arms may break due to corrosion. This can cause the vehicle to steer in an unpredictable way, increasing the risk of injuries.

    SR/03235/25 ↗
  • EU Safety Gate2017–2046

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…

    Texto completo

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.

    SR/03207/25 ↗
  • EU Safety Gate2024, 2025

    The shock absorber attached to the body has been mounted with an insufficient tightening torque (measured value: 90 Nm). This can result in the attachment breaking and in a loss of the vehicle's control, increasing the…

    Texto completo

    The shock absorber attached to the body has been mounted with an insufficient tightening torque (measured value: 90 Nm). This can result in the attachment breaking and in a loss of the vehicle's control, increasing the risk of accident and injuries.

    SR/01294/25 ↗
Mostrar 26 llamadas más
  • EU Safety Gate2024

    An insufficiently resistant seat fixation on the first- and/or second row can lead to a seat movement in the event of an accident. This increases the risk of injuries to the occupants.

    A12/03525/24 ↗
  • EU Safety GateGrave2024

    Radio screens can be insufficiently fixed in place. In the event of an accident, the screen can come loose and cause injuries to the occupants and/or damage to the airbag when it is deployed.

    A12/03104/24 ↗
  • EU Safety Gate2024

    Incorrectly fitted rear axle suspension springs can lead to a loss of vehicle handling and the spring may come free from its support. The spring can fall onto the road whilst driving, posing a risk of accident and…

    Texto completo

    Incorrectly fitted rear axle suspension springs can lead to a loss of vehicle handling and the spring may come free from its support. The spring can fall onto the road whilst driving, posing a risk of accident and injuries to the following traffic.

    A12/03011/24 ↗
  • EU Safety GateGrave2023, 2024

    The ground connections can come loose, which can result in the loss of several vehicle functions and lead to unintentional acceleration or the vehicle catching fire.

    A12/01789/24 ↗
  • EU Safety GateGrave2022

    The left track rod of the steering assembly is attached with incorrect torque. This may cause the connection to fail and could result in a loss of steering, increasing the risk of an accident.

    A12/00992/23 ↗
  • EU Safety GateGrave2020–2022

    The fuel line may come into contact with the bodywork and plastic parts. This can lead to fuel leakage with the result that the vehicle loses road contact or other road users close to the vehicle could slip, increasing…

    Texto completo

    The fuel line may come into contact with the bodywork and plastic parts. This can lead to fuel leakage with the result that the vehicle loses road contact or other road users close to the vehicle could slip, increasing the risk of an accident.

    A12/00096/23 ↗
  • EU Safety GateGrave2022

    The screws in the vehicle steering box may have been improperly tightened, which can result in a loss of steering control, increasing the risk of an accident.

    A12/01510/22 ↗
  • EU Safety Gate2022

    The rear brake may be defective, reducing the service brake performance, increasing the risk of an accident.

    A12/01313/22 ↗
  • EU Safety GateGrave2022

    Improper high voltage wiring harness could cause temperature rise and burning of contacts inside the connector. This defect can cause significant damage to the power supply system, increasing the risk of fire.

    A12/01351/22 ↗
  • EU Safety Gate2021

    The locking mechanism of the front headrests to the seats may be missing and could eject in the event of a collision, increasing the risk of injury.

    A12/00845/22 ↗
  • EU Safety Gate2021

    The manufacturer's VIN (Vehicle Identification Number) label displays an incorrect weight. This may lead to an accident if more than the maximum allowable weight is towed.

    A12/00412/22 ↗
  • EU Safety Gate2019

    The bolting of the rear axle can be defective.This may lead to a loss of driving stability, increasing the risk of an accident.

    A12/00157/20 ↗
  • EU Safety Gate2021

    The centring pin for the rear suspension spring may not be properly welded. This could lead to the rear suspension spring being detached, increasing the risk of an accident. The product does not meet the requirements…

    Texto completo

    The centring pin for the rear suspension spring may not be properly welded. This could lead to the rear suspension spring being detached, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01194/21 ↗
  • EU Safety Gate2021

    Due to a manufacturing defect, the wheel bolts may be tightened with incorrect torque. This could lead to the detachment of a wheel, increasing the risk of an accident.

    A12/00629/21 ↗
  • EU Safety Gate2019, 2020

    The wheel screws are not tightened with the required torque. This could lead to a wheel being lost during driving, increasing the risk of an accident.

    A12/00135/21 ↗
  • EU Safety Gate2019, 2020

    The seat locking mechanism may not engage. This may increase the risk of injury in the event of an accident.

    A12/00003/21 ↗
  • EU Safety Gate2019

    There is an increased risk of leak in the fuel line. Fuel may escape and ignitie, as well as leak into the road, causing a risk to trafic.

    A12/00348/20 ↗
  • EU Safety GateGrave2019

    Water may leak into the vehicle's interior. Consequently, the proper functioning of the airbags can be impaired, increasing the risk of injury in the event of an accident.

    A12/00363/20 ↗
  • EU Safety GateGrave2019

    Water may leak into the vehicle interior. This can impair the proper functioning of the airbags, increasing the risk of injury in the event of an accident.

    A12/00191/20 ↗
  • EU Safety Gate2018

    The handbrake cable and adjustment screw may be defective. This can impair the handbrake holding function, increasing the risk of an accident.

    A12/0724/19 ↗
  • EU Safety Gate2017, 2018

    Some components of the strap guiding rail may not have been accurately produced. As a consequence, the protective function of the safety belt in the third row of seats may not be guaranteed.

    A12/1652/18 ↗
  • EU Safety Gate2013–2016

    null The track rod may not be mounted correctly which could affect the handling of the vehicle.

    A12/0067/17 ↗
  • EU Safety Gate2015, 2016

    null The tightening torque of the bonnet primary latch striker bolts might be incorrect. This could lead to the bonnet not locking. An accident could arise if the bonnet consequently opened whilst driving.

    A12/1067/16 ↗
  • EU Safety Gate2015, 2016

    null Due to insufficient tightening torque of the bonnet's primary latch bolts, the bonnet may unlock unexpectedly while driving.

    A12/0177/16 ↗
  • EU Safety Gate2015

    null There may be contact between the main wiring and the windscreen wipers mechanism which might cause the engine to fail to start or the windscreen wipers to stop unexpectedly. Insufficient tightening of the bolt and…

    Texto completo

    null There may be contact between the main wiring and the windscreen wipers mechanism which might cause the engine to fail to start or the windscreen wipers to stop unexpectedly. Insufficient tightening of the bolt and nut in the lower suspension arm may affect the steering when the vehicle is being driven.The hand brake cable may detach causing the hand brake to not work.

    A12/0494/15 ↗
  • EU Safety Gate2014

    null The seat mounting might fail in the event of an accident.

    A12/0302/15 ↗