AutoDefects
Español

Vauxhall / Opel Vivaro 2021: fiabilidad

10 % más fallos mecánicos que su clase

12.458 inspecciones MOT de Vauxhall / Opel Vivaro matriculados por primera vez en 2021: el 9,7 % no pasó por un defecto mecánico; la mediana de su clase con la misma edad y kilometraje es del 8,8 %.

Tasa de fallo mecánico
9,7%
Mediana de la clase, misma edad y kilometraje
8,8%
No pasó la MOT (cualquier motivo)
25,2%
inspecciones MOT
12.458
Llamadas a revisión
8

Qué falla según el kilometraje

KilometrajeInspeccionesFallo mecánicoMediana de la clase
0-50k km34866,1%4,8%
50-100k km655511,1%9,7%
100-150k km199511,0%11,6%
150k+ km42211,4%13,1%

Qué falla en este año

SistemaFallo mecánico
Suspensión y ruedas0,8%
Frenos6,5%
Motor, escape y emisiones1,5%
Dirección0,1%
Carrocería, bastidor y corrosión1,1%
Cinturones y airbags0,6%
Luces y electricidad (desgaste)11,5%
Neumáticos (desgaste)4,6%
Escobillas y parabrisas (desgaste)8,6%
Otros y matrículas (desgaste)0,3%

Llamadas a revisión oficiales

Campañas publicadas por la NHTSA (EE. UU.) y el EU Safety Gate que citan este modelo. Comprueba por VIN si afecta a un coche concreto.

  • EU Safety GateGrave2021–2023

    A hydrogen leak can occur between the tank’s outer cover and the protective lining. If the vehicle’s hydrogen sensors detect the leak while driving, the fuel-cell system will shut off. The vehicle will then only run in…

    Texto completo

    A hydrogen leak can occur between the tank’s outer cover and the protective lining. If the vehicle’s hydrogen sensors detect the leak while driving, the fuel-cell system will shut off. The vehicle will then only run in electric (battery) mode, with a very limited range of about 30 km and no ability to recharge hydrogen on board.If the vehicle is parked, the hydrogen sensors do not operate. In this case, hydrogen could build up under the vehicle which increases the risk of hydrogen catching fire.

    SR/03913/25 ↗
  • EU Safety Gate2020–2022

    The fixing bolts and the hinge on the vehicle’s front control arms may break due to corrosion. This can cause the vehicle to steer in an unpredictable way, increasing the risk of injuries.

    SR/03235/25 ↗
  • EU Safety Gate2017–2046

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…

    Texto completo

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.

    SR/03207/25 ↗
  • EU Safety GateGrave2020–2022

    The fuel line may come into contact with the bodywork and plastic parts. This can lead to fuel leakage with the result that the vehicle loses road contact or other road users close to the vehicle could slip, increasing…

    Texto completo

    The fuel line may come into contact with the bodywork and plastic parts. This can lead to fuel leakage with the result that the vehicle loses road contact or other road users close to the vehicle could slip, increasing the risk of an accident.

    A12/00096/23 ↗
  • EU Safety Gate2021

    The locking mechanism of the front headrests to the seats may be missing and could eject in the event of a collision, increasing the risk of injury.

    A12/00845/22 ↗
  • EU Safety Gate2021

    The manufacturer's VIN (Vehicle Identification Number) label displays an incorrect weight. This may lead to an accident if more than the maximum allowable weight is towed.

    A12/00412/22 ↗
Mostrar 2 llamadas más
  • EU Safety Gate2021

    The centring pin for the rear suspension spring may not be properly welded. This could lead to the rear suspension spring being detached, increasing the risk of an accident. The product does not meet the requirements…

    Texto completo

    The centring pin for the rear suspension spring may not be properly welded. This could lead to the rear suspension spring being detached, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01194/21 ↗
  • EU Safety Gate2021

    Due to a manufacturing defect, the wheel bolts may be tightened with incorrect torque. This could lead to the detachment of a wheel, increasing the risk of an accident.

    A12/00629/21 ↗