AutoDefects
Español

Citroën Berlingo 2019: fiabilidad

5 % más fallos mecánicos que su clase

15.735 inspecciones MOT de Citroën Berlingo matriculados por primera vez en 2019: el 12,3 % no pasó por un defecto mecánico; la mediana de su clase con la misma edad y kilometraje es del 11,8 %.

Tasa de fallo mecánico
12,3%
Mediana de la clase, misma edad y kilometraje
11,8%
No pasó la MOT (cualquier motivo)
28,1%
inspecciones MOT
15.735
Llamadas a revisión
8

Qué falla según el kilometraje

KilometrajeInspeccionesFallo mecánicoMediana de la clase
0-50k km31966,4%5,9%
50-100k km612311,5%11,2%
100-150k km409114,9%13,7%
150k+ km232518,2%17,9%

Qué falla en este año

SistemaFallo mecánico
Suspensión y ruedas1,9%
Frenos6,5%
Motor, escape y emisiones2,2%
Dirección0,9%
Carrocería, bastidor y corrosión2,7%
Cinturones y airbags0,8%
Luces y electricidad (desgaste)14,5%
Neumáticos (desgaste)6,0%
Escobillas y parabrisas (desgaste)7,2%
Otros y matrículas (desgaste)0,2%

Llamadas a revisión oficiales

Campañas publicadas por la NHTSA (EE. UU.) y el EU Safety Gate que citan este modelo. Comprueba por VIN si afecta a un coche concreto.

  • EU Safety Gate2015–2024

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…

    Texto completo

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.

    SR/03151/25 ↗
  • EU Safety Gate2017–2023

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…

    Texto completo

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.

    SR/02655/25 ↗
  • EU Safety Gate2019–2022

    A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.

    A12/01876/23 ↗
  • EU Safety GateGrave2017–2021

    The electrical supply to and software for the additional heating is not correctly designed and the heater can shut off too soon when the vehicle is switched off. This can lead to fuel remaining in the heater, producing…

    Texto completo

    The electrical supply to and software for the additional heating is not correctly designed and the heater can shut off too soon when the vehicle is switched off. This can lead to fuel remaining in the heater, producing smoke and fuel leaks increasing the risk of fire.

    A12/00042/22 ↗
  • EU Safety Gate2019, 2020

    The track rods may be damaged when they are under load. This may result in a loss of driving stability, increasing the risk of an accident.

    A12/01160/20 ↗
  • EU Safety GateGrave2018, 2019

    The front passenger seatbelt is defective. As a result, its restraining function will be impaired, increasing the risk of injury in the event of an accident.

    A12/00344/20 ↗
Mostrar 2 llamadas más
  • EU Safety GateGrave2019

    The steering column is not manufactured according to specifications.This may result in steering failure and loss of control over the vehicle, increasing the risk of an accident.

    A12/00034/20 ↗
  • EU Safety Gate2017–2019

    Possible misalignment of the ratchet on the handbrake lever latching mechanism. As a result the handbrake may not engage or could disengage by itself, increasing the risk of an accident.

    A12/0925/19 ↗