AutoDefects
English

Citroën Berlingo 2019: reliability

5% more mechanical failures than the class

15,735 MOT tests of Citroën Berlingo cars first registered in 2019: 12.3% failed for a mechanical defect; the class median at the same age and mileage is 11.8%.

Mechanical failure rate
12.3%
Class median, same age and mileage
11.8%
Failed MOT (any reason)
28.1%
MOT tests
15,735
Recalls
8

What fails, by mileage

MileageTestsMechanical failClass median
0-50k km3,1966.4%5.9%
50-100k km6,12311.5%11.2%
100-150k km4,09114.9%13.7%
150k+ km2,32518.2%17.9%

What fails on this year

SystemMechanical fail
Suspension and wheels1.9%
Brakes6.5%
Engine, exhaust and emissions2.2%
Steering0.9%
Body, chassis and corrosion2.7%
Seat belts and airbags0.8%
Lights and electrics (wear)14.5%
Tyres (wear)6.0%
Wipers and windscreen (wear)7.2%
Other and plates (wear)0.2%

Official recalls

Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.

  • EU Safety Gate2015–2024

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…

    Full text

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.

    SR/03151/25 ↗
  • EU Safety Gate2017–2023

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…

    Full text

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.

    SR/02655/25 ↗
  • EU Safety Gate2019–2022

    A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.

    A12/01876/23 ↗
  • EU Safety GateSerious2017–2021

    The electrical supply to and software for the additional heating is not correctly designed and the heater can shut off too soon when the vehicle is switched off. This can lead to fuel remaining in the heater, producing…

    Full text

    The electrical supply to and software for the additional heating is not correctly designed and the heater can shut off too soon when the vehicle is switched off. This can lead to fuel remaining in the heater, producing smoke and fuel leaks increasing the risk of fire.

    A12/00042/22 ↗
  • EU Safety Gate2019, 2020

    The track rods may be damaged when they are under load. This may result in a loss of driving stability, increasing the risk of an accident.

    A12/01160/20 ↗
  • EU Safety GateSerious2018, 2019

    The front passenger seatbelt is defective. As a result, its restraining function will be impaired, increasing the risk of injury in the event of an accident.

    A12/00344/20 ↗
Show 2 more recalls
  • EU Safety GateSerious2019

    The steering column is not manufactured according to specifications.This may result in steering failure and loss of control over the vehicle, increasing the risk of an accident.

    A12/00034/20 ↗
  • EU Safety Gate2017–2019

    Possible misalignment of the ratchet on the handbrake lever latching mechanism. As a result the handbrake may not engage or could disengage by itself, increasing the risk of an accident.

    A12/0925/19 ↗