Vans
Citroën Dispatch / SpaceTourer reliability
In 49,187 UK MOT tests, 24.7% of Citroën Dispatch / SpaceTourer cars failed for a mechanical or structural defect. The median van of the same age and mileage: 22.8%.
- Best years
- 2005, 2017, 2018
- Years with most failures
- 2015, 2016, 2021
- Weak spot at high mileage
- Body, chassis and corrosion
- Official recalls
- 67 recalls, 22 serious
- Mechanical failure rate
- 24.7%
- Class median, same age and mileage
- 22.8%
- MOT tests
- 49,187
- US owner complaints
- 0
MOT results by test year
The whole fleet of this model at each year’s MOT, against its class at the same age and mileage. Shows whether the model keeps its standing as it ages.
| MOT year | Tests | Mechanical fail | Class median | Any fail |
|---|---|---|---|---|
| 2024 | 49,187 | 24.7% | 22.8% | 39.3% |
| 2023 | 48,767 | 25.0% | 22.8% | 39.8% |
Failure rate by year of first registration
Mechanical failure rate at the 2024 MOT, by the year the car was first registered, against the median of its class at the same age and mileage.
| Year | Tests | Mechanical fail | Class median | Any fail | Recalls |
|---|---|---|---|---|---|
| 2022 | 85 | 4.7% | 3.6% | 10.6% | 10 |
| 2021 | 3,550 | 10.9% | 8.6% | 29.1% | 7 |
| 2020 | 3,447 | 10.8% | 10.4% | 29.5% | 8 |
| 2019 | 5,277 | 11.9% | 12.6% | 27.4% | 12 |
| 2018 | 5,452 | 12.4% | 14.3% | 27.2% | 16 |
| 2017 | 5,000 | 16.9% | 18.8% | 30.0% | 17 |
| 2016 | 3,681 | 29.6% | 22.6% | 44.4% | 27 |
| 2015 | 4,115 | 35.7% | 25.2% | 50.0% | 13 |
| 2014 | 3,275 | 33.7% | 28.3% | 47.9% | 4 |
| 2013 | 2,511 | 34.4% | 30.4% | 50.1% | 3 |
| 2012 | 1,798 | 35.5% | 33.0% | 49.8% | 2 |
| 2011 | 1,944 | 36.3% | 33.9% | 50.2% | 1 |
| 2010 | 2,033 | 35.3% | 35.2% | 48.8% | 1 |
| 2009 | 1,550 | 36.5% | 36.1% | 49.8% | 0 |
| 2008 | 1,854 | 37.9% | 37.5% | 49.5% | 0 |
| 2007 | 1,596 | 39.4% | 37.1% | 50.0% | 0 |
| 2006 | 715 | 40.8% | 38.4% | 49.8% | 0 |
| 2005 | 494 | 36.4% | 39.6% | 48.6% | 0 |
| 2004 | 325 | 35.7% | 38.1% | 44.3% | 0 |
What fails, by mileage
Share of MOT tests that failed on each system. Wear items (bulbs, tyres, wipers, plates) are excluded from the reliability score.
(…) = Class median, same age and mileage
Pre-purchase checklist for the mechanic
Built from the systems where this model fails more often than its class at 100,000 km and above, and from open recalls.
- Body and chassis: inspect sills, subframes, jacking points and the floor for corrosion and previous repairs.
- Recalls: 5 serious recalls name this model — ask for proof the work was done
- SR/01581/26 · 2025, 2026 · The starter body may contact the battery’s positive cable due to insufficient cable protection. This could cause an electric arc or short…
- SR/00368/26 · 2025 · Vehicles fitted with a DV5R engine may experience a fuel leak. The non-conformity of the round shape on the cone of the common rail may…
- SR/03914/25 · 2022, 2023 · A hydrogen leak can occur between the tank’s outer cover and the protective lining. If the vehicle’s hydrogen sensors detect the leak while…
- A12/03245/24 · 2024 · Radio screens can be insufficiently fixed in place. In the event of an accident, the screen can come loose and cause injuries to the…
- A12/01787/24 · 2023, 2024 · The ground connections can come loose, which can result in the loss of several vehicle functions and lead to unintentional acceleration or…
Check a specific car by its VIN on the official sites: NHTSA (US) · DVSA (UK)
Official recalls
Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.
The starter body may contact the battery’s positive cable due to insufficient cable protection. This could cause an electric arc or short circuit, leading to smoke from the engine compartment and a fire.
SR/01581/26 ↗The DV5R engine may experience a loss of power due to slippage of the water pump pulley. This slippage can cause misalignment of the timing belt, potentially resulting in engine shutdown. The sprocket of the water pump…
SR/00969/26 ↗Full text
The DV5R engine may experience a loss of power due to slippage of the water pump pulley. This slippage can cause misalignment of the timing belt, potentially resulting in engine shutdown. The sprocket of the water pump pulley may detach from the shaft, which can lead to the loss of parts on the road and increase the risk of accidents and injuries.
Vehicles fitted with a DV5R engine may experience a fuel leak. The non-conformity of the round shape on the cone of the common rail may cause the nut to loosen, resulting in the possibility of fuel leaking between the…
SR/00368/26 ↗Full text
Vehicles fitted with a DV5R engine may experience a fuel leak. The non-conformity of the round shape on the cone of the common rail may cause the nut to loosen, resulting in the possibility of fuel leaking between the nut and the thread, leading to fuel vapours and fuel flow into the hot exhaust system. This may lead to a fire under the bonnet.
Certain vehicles equipped with the DW10F Euro 6.4 engine may have a defect in the system that monitors urea consumption. Because of this issue, the diagnostic test intended to detect problems such as low urea use or a…
SR/04142/25 ↗Full text
Certain vehicles equipped with the DW10F Euro 6.4 engine may have a defect in the system that monitors urea consumption. Because of this issue, the diagnostic test intended to detect problems such as low urea use or a blocked injector may not run often enough. This increases the risk that the emissions system will not be properly checked, which could lead the vehicle to fall short of the required emissions standards.
A hydrogen leak can occur between the tank’s outer cover and the protective lining. If the vehicle’s hydrogen sensors detect the leak while driving, the fuel-cell system will shut off. The vehicle will then only run in…
SR/03914/25 ↗Full text
A hydrogen leak can occur between the tank’s outer cover and the protective lining. If the vehicle’s hydrogen sensors detect the leak while driving, the fuel-cell system will shut off. The vehicle will then only run in electric (battery) mode, with a very limited range of about 30 km and no ability to recharge hydrogen on board.If the vehicle is parked, the hydrogen sensors do not operate. In this case, hydrogen could build up under the vehicle which increases the risk of hydrogen catching fire.
The rear brake discs do not have sufficient contact with the wheel hub, resulting in an abnormal concentration of stress on them. This might cause cracks and a reduced transmission of torque, resulting in the loosening…
SR/03549/25 ↗Full text
The rear brake discs do not have sufficient contact with the wheel hub, resulting in an abnormal concentration of stress on them. This might cause cracks and a reduced transmission of torque, resulting in the loosening of the wheel bolts, leading to an increased risk of a wheel becoming detached from the vehicle. Moreover, a crack that forms a groove in the surface of a brake disc might impair the braking function, increasing the risk of injuries.
Show 54 more recalls
The fixing bolts and the hinge on the vehicle’s front control arms may break due to corrosion. This can cause the vehicle to steer in an unpredictable way, increasing the risk of injuries.
SR/03234/25 ↗The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…
SR/03151/25 ↗Full text
The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.
The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started,…
SR/01423/25 ↗Full text
The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started, to an acceleration power's loss and to the engine suddenly cutting out while driving. This increases the risk of accidents and injuries.
The shock absorber attached to the body has been mounted with an insufficient tightening torque (measured value: 90 Nm). This can result in the attachment breaking and in a loss of the vehicle's control, increasing the…
SR/01289/25 ↗Full text
The shock absorber attached to the body has been mounted with an insufficient tightening torque (measured value: 90 Nm). This can result in the attachment breaking and in a loss of the vehicle's control, increasing the risk of accident and injuries.
First- and/or second-row seat mountings may be defective. The seat mounting may fail during an accident leading to injuries
A12/03490/24 ↗Radio screens can be insufficiently fixed in place. In the event of an accident, the screen can come loose and cause injuries to the occupants and/or damage to the airbag when it is deployed.
A12/03245/24 ↗Incorrectly fitted rear axle suspension springs can lead to a loss of vehicle handling and the spring may come free from its support. The spring can fall onto the road whilst driving, posing a risk of accident and…
A12/02729/24 ↗Full text
Incorrectly fitted rear axle suspension springs can lead to a loss of vehicle handling and the spring may come free from its support. The spring can fall onto the road whilst driving, posing a risk of accident and injuries to the following traffic.
The ground connections can come loose, which can result in the loss of several vehicle functions and lead to unintentional acceleration or the vehicle catching fire.
A12/01787/24 ↗A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.
A12/01876/23 ↗The safety function (charge pin temperature sensor) of the charging cable may fail and not prevent the cable from overheating, creating a risk of fire.
A12/01623/23 ↗The fuel line may come into contact with the bodywork and plastic parts. This can lead to fuel leakage, resulting in that the vehicle loses road contact or road users close to the vehicle could slip, increasing the risk…
A12/00094/23 ↗Full text
The fuel line may come into contact with the bodywork and plastic parts. This can lead to fuel leakage, resulting in that the vehicle loses road contact or road users close to the vehicle could slip, increasing the risk of an accident.
The rear brake may be defective, which could result in a loss of service brake effectiveness which in turn could increase the risk of an accident.
A12/01312/22 ↗The screws in the vehicle steering box may have been improperly tightened, which can result in a loss of steering control, increasing the risk of an accident.
A12/01509/22 ↗The high voltage wiring harness may be defective. This could result in an increased risk of fire.
A12/01430/22 ↗The notch locking mechanism of the headrest to the seat may be missing. As a result, the front headrests would not be locked and may eject in the event of a collision, increasing the risk of injury.
A12/00874/22 ↗Inadequate attachment of a wiring harness can lead to overheating of the rear window, increasing the risk of fire.
A12/00460/22 ↗The manufacturer's VIN (Vehicle Identification Number) label displays an incorrect weight. This may lead to an accident if more than the maximum allowable weight is towed.
A12/00410/22 ↗The centring pin for the rear suspension spring may not be properly welded. This could lead to the rear suspension spring being detached, increasing the risk of an accident. The product does not meet the requirements…
A12/01240/21 ↗Full text
The centring pin for the rear suspension spring may not be properly welded. This could lead to the rear suspension spring being detached, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of…
A12/01186/21 ↗Full text
The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to a manufacturing defect, the wheel bolts may be tightened with incorrect torque. This could lead to the detachment of a wheel, increasing the risk of an accident.
A12/00623/21 ↗The bolting of the front wheels may be incorrect. As a result, they may become detached whilst the car is being driven, increasing the risk of an accident.
A12/00305/21 ↗The bolting of the front wheels may be incorrect.As a result, they may become detached whilst the car is being driven, increasing the risk of an accident.
A12/00285/21 ↗The seat adjustment mechanism may not be fully operational. As a result, the seats could move in the event of an accident, increasing the risk of injury.
A12/00260/21 ↗The rear brake hoses may have been incorrectly attached and can become damaged. This will impair the braking performance, increasing the risk of an accident.
A12/01138/20 ↗The seat belts have not been attached correctly. This will impair their protective function, increasing the risk of injury in the event of an accident.In addition, incorrectly attached earth cables may cause the…
A12/01040/20 ↗Full text
The seat belts have not been attached correctly. This will impair their protective function, increasing the risk of injury in the event of an accident.In addition, incorrectly attached earth cables may cause the electronic stability program (ESP) to fail and can increase the risk of fire.
The bolts attaching the seat belts have not been tightened correctly.This will impair the seat belts' protective function, increasing the risk of an injury in the event of an accident.
A12/00871/20 ↗The front wheel arches may be inadequately sealed, allowing moisture to ingress.This can cause electronic components such as the airbags to malfunction.
A12/00872/20 ↗The rear brake hoses have been incorrectly attached and may be damaged. As a result, the braking performance will be impaired, increasing the risk of an accident.
A12/00873/20 ↗The rear brake callipers can be defective.This will impair the functioning of the parking brake, increasing the risk of an accident.
A12/00876/20 ↗The fuel line can be damaged by coming into contact with the vehicle body.Consequently, fuel may leak onto the road, posing a risk to the following traffic.
A12/00717/20 ↗Water may leak into the vehicle's interior. Consequently, the proper functioning of the airbags can be impaired, increasing the risk of injury in the event of an accident.
A12/00374/20 ↗The ball joint on the wishbone suspension may loosen. This would impair the vehicle's directional stability, increasing the risk of an accident.
A12/1950/19 ↗The seat-belt buckle of the outer passenger seat may inadvertently become released. As a result, the seat belt no longer offers any protection, increasing the risk of injury in the event of an accident.
A12/1893/19 ↗A plastic component inside the exhaust line of the particulate filter could damage the diesel particulate filter (DPF). Depending on the amount of damage, the particulate emission level could exceed regulatory limits.
A12/1591/19 ↗The support for the counterweight located beneath the rear floor may crack over time and break. As a result, the counterweight may become detached from the vehicle and fall off, posing a risk to the following traffic.
A12/1435/19 ↗The wishbone mounting brackets on the rear suspension system are improperly fixed and could break. This can result in loss of directional control, increasing the risk of an accident.
A12/0568/19 ↗Excessive loading of the front suspension could result in loosening and eventual separation of the front wishbone lower ball joints. This can impair vehicle’s directional stability, increasing the risk of an accident.
A12/0569/19 ↗The fastening screws on the transverse link connection to the front axle wishbone could break. This can impair driving stability, increasing the risk of an accident.
A12/0571/19 ↗Fastening elements of the steering mechanism may be defective. This may result in malfunctioning of the steering system, leading to an accident.
A12/0572/19 ↗The vehicle’s air-conditioning compressor pulley could break and damage other components in the engine compartment. This may increase the risk of an accident.
A12/0574/19 ↗The cylinder-housing oil gallery plug may not have been correctly tightened. As a consequence oil might leak which presents a skid hazard for following traffic.
A12/1363/18 ↗The tow hitch bracket can deform when it is placed under maximum pressure. This may affect the driving behaviour of the vehicle and/or the retention of the trailer, which could lead to accidents.
A12/1353/18 ↗The van has an incorrect version of the engine's software, leading to errors in the cooling strategy and malfunction of the engine's "high temperature" warning system. This could lead to unnoticed overheating of the…
A12/1358/18 ↗Full text
The van has an incorrect version of the engine's software, leading to errors in the cooling strategy and malfunction of the engine's "high temperature" warning system. This could lead to unnoticed overheating of the engine, which may leak oil and also fail, increasing the risk of accident.
A defect concerning a machined part of the engine could cause a loss of power. As a result the engine could stall or fail.
A12/0093/18 ↗The wiring of the connections for the safety belt pre-tensioners and the side-curtain airbags may be incorrect. In the event of an impact, these mechanisms could consequently be activated on the wrong side.
A12/1815/17 ↗null Because of the incorrect positioning of the power terminal on the starter during assembly, wear of the electric starter cable could occur which could lead to a short-circuit. As a result, it may be impossible to…
A12/1341/17 ↗Full text
null Because of the incorrect positioning of the power terminal on the starter during assembly, wear of the electric starter cable could occur which could lead to a short-circuit. As a result, it may be impossible to start the vehicle.
null The starter relay may be faulty, which could lead to inadvertent movement of the vehicle.
A12/1187/17 ↗null The brackets for the air conditioning compressor have not been assembled properly. As a result, the air conditioning compressor could fall on to the road endangering following vehicles.
A12/0989/17 ↗null The pinion of the steering valve on the steering rack has been incorrectly fixed. This may lead to a loss of steering control.
A12/0820/17 ↗null Some seals for the bodywork are missing. As a result, water could enter the passenger compartment and cause the airbag control module to malfunction, which could lead to the airbag being deployed unexpectedly.
A12/0229/17 ↗null Possible incorrect positioning of a fuel pipe seal in the filler cap area could lead to a loss of fuel when the tank is filled completely or in the event that the vehicle is overturns.
A12/0231/17 ↗null One or several wheel fixing nuts may have been incorrectly tightened on one or several wheels. This could lead to fractures appearing on the wheel and the possibility that the wheel could become detached while the…
A12/0232/17 ↗Full text
null One or several wheel fixing nuts may have been incorrectly tightened on one or several wheels. This could lead to fractures appearing on the wheel and the possibility that the wheel could become detached while the vehicle is in motion. If this were to happen, the driver could have difficulty controlling the vehicle.
null The front shock absorbers are incorrectly secured. This could lead to one of the shock absorbers becoming detached and difficulties for the driver to control the vehicle.
A12/0233/17 ↗null The incorrect tightening of the devices securing the airbag control box could cause the engine to stop or the airbags to malfunction.
A12/0235/17 ↗