Mercedes-Benz Vito / V-Class 2019: reliability
11,635 MOT tests of Mercedes-Benz Vito / V-Class cars first registered in 2019: 13.6% failed for a mechanical defect; the class median at the same age and mileage is 14.2%.
- Mechanical failure rate
- 13.6%
- Class median, same age and mileage
- 14.2%
- Failed MOT (any reason)
- 22.7%
- MOT tests
- 11,635
- Recalls
- 20
What fails, by mileage
| Mileage | Tests | Mechanical fail | Class median |
|---|---|---|---|
| 0-50k km | 913 | 5.9% | 5.9% |
| 50-100k km | 2,938 | 12.6% | 11.2% |
| 100-150k km | 2,999 | 14.8% | 13.7% |
| 150k+ km | 4,785 | 14.9% | 17.9% |
What fails on this year
Official recalls
Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.
The controllable coolant pump may have a leak between the coolant and vacuum circuit via negative pressure and allow coolant to enter it. If the electric switchover valves are exposed to coolant, a continuous increase…
A12/01042/22 ↗Full text
The controllable coolant pump may have a leak between the coolant and vacuum circuit via negative pressure and allow coolant to enter it. If the electric switchover valves are exposed to coolant, a continuous increase in the component part temperature may occur and cause fire. In addition, the brake booster may become damaged over time and reduce brake performance that could lead to an accident.
A coding of a control unit may not match the individual vehicle equipment so that the affected control units may malfunction. As a result, some functions of the electronic stability program control unit may not be fully…
A12/01072/22 ↗Full text
A coding of a control unit may not match the individual vehicle equipment so that the affected control units may malfunction. As a result, some functions of the electronic stability program control unit may not be fully available, thus changing the braking and control behavior, increasing the risk of an accident.
Incorrect image (frozen picture) information may be displayed by the rear view camera at low temperatures. As a result, the driver will not have an accurate and reliable view of the areas behind the vehicle on the…
A12/00872/22 ↗Full text
Incorrect image (frozen picture) information may be displayed by the rear view camera at low temperatures. As a result, the driver will not have an accurate and reliable view of the areas behind the vehicle on the display screen when reversing, which could increase the risk of an accident
The parameters of the gear recognition sensor may be incorrect.As a result, the reversing light may be deactivated inadvertently, increasing the risk of an accident.
INFO/00154/21 ↗Due to inadequate welding, the transverse control arm may break.As a result, the vehicle’s braking and steering capability may be impaired, increasing the risk of an accident.
A12/01136/21 ↗The functioning of the emergency call system may in some cases be impaired. The communication module software will be updated on affected vehicles.
INFO/00131/21 ↗
Show 9 more recalls
Under certain conditions there may be a gear recognition malfunction, causing the reversing light to stop working.
INFO/00127/21 ↗The fuel return line may be damaged by contact with the underbody panelling. As a result, fuel may leak onto the road, posing a risk to the following traffic.
A12/00838/20 ↗Defective production of the passenger seat may lead to reduced seat strength.
A12/00739/20 ↗The headrests and headrest fixing rods in the rear of the vehicle may be defective.This will impair their protective function, increasing the risk of injury in the event of an accident.
A12/00238/20 ↗The head restraints may be defective. This may impair their protective function, increasing the risk of injury in the event of an accident.
A12/00215/20 ↗The upholstery of the headrests may become detached. This could increase the risk of injury in the event of an accident.
A12/00095/19 ↗A solenoid valve in the brake fluid circuit could jam. Consequently, brake fluid would outflow to the ABS storage chamber. This might impair the braking capacity of the vehicle, as well as the functioning of the ABS and…
A12/00013/19 ↗Full text
A solenoid valve in the brake fluid circuit could jam. Consequently, brake fluid would outflow to the ABS storage chamber. This might impair the braking capacity of the vehicle, as well as the functioning of the ABS and ESP, increasing the risk of accident.
The content of a labelling attached to the vehicle referencing its weight and dimensions is inaccurate. As a result, the vehicle could be overloaded, thereby limiting its stability and increasing the risk of an accident.
A12/1851/19 ↗The coverings on the seat boxes with an integrated back-up battery may be missing. This will increase the risk of a short circuit or fire in case objects made of electroconductive (e.g. metal) materials are placed in…
A12/1752/19 ↗Full text
The coverings on the seat boxes with an integrated back-up battery may be missing. This will increase the risk of a short circuit or fire in case objects made of electroconductive (e.g. metal) materials are placed in the seat boxes.