AutoDefects
English

Mercedes-Benz Vito / V-Class 2020: reliability

25% more mechanical failures than the class

5,170 MOT tests of Mercedes-Benz Vito / V-Class cars first registered in 2020: 13.2% failed for a mechanical defect; the class median at the same age and mileage is 10.6%.

Mechanical failure rate
13.2%
Class median, same age and mileage
10.6%
Failed MOT (any reason)
24.7%
MOT tests
5,170
Recalls
14

What fails, by mileage

MileageTestsMechanical failClass median
0-50k km8674.0%4.2%
50-100k km2,00111.7%10.5%
100-150k km1,37217.4%12.2%
150k+ km93018.8%14.2%

What fails on this year

SystemMechanical fail
Suspension and wheels4.2%
Brakes7.3%
Engine, exhaust and emissions2.9%
Steering0.1%
Body, chassis and corrosion0.8%
Seat belts and airbags0.6%
Lights and electrics (wear)6.7%
Tyres (wear)8.2%
Wipers and windscreen (wear)7.1%
Other and plates (wear)0.1%

Official recalls

Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.

  • EU Safety Gate2020–2022

    The drainage pipe for the fuel filter can rub against the underbody panel while driving. This can lead to diesel leakage, creating a risk of accidents, injuries.

    A12/00382/23 ↗
  • EU Safety GateSerious2019–2021

    The controllable coolant pump may have a leak between the coolant and vacuum circuit via negative pressure and allow coolant to enter it. If the electric switchover valves are exposed to coolant, a continuous increase…

    Full text

    The controllable coolant pump may have a leak between the coolant and vacuum circuit via negative pressure and allow coolant to enter it. If the electric switchover valves are exposed to coolant, a continuous increase in the component part temperature may occur and cause fire. In addition, the brake booster may become damaged over time and reduce brake performance that could lead to an accident.

    A12/01042/22 ↗
  • EU Safety Gate2005–2021

    A coding of a control unit may not match the individual vehicle equipment so that the affected control units may malfunction. As a result, some functions of the electronic stability program control unit may not be fully…

    Full text

    A coding of a control unit may not match the individual vehicle equipment so that the affected control units may malfunction. As a result, some functions of the electronic stability program control unit may not be fully available, thus changing the braking and control behavior, increasing the risk of an accident.

    A12/01072/22 ↗
  • EU Safety Gate2014–2020

    Incorrect image (frozen picture) information may be displayed by the rear view camera at low temperatures. As a result, the driver will not have an accurate and reliable view of the areas behind the vehicle on the…

    Full text

    Incorrect image (frozen picture) information may be displayed by the rear view camera at low temperatures. As a result, the driver will not have an accurate and reliable view of the areas behind the vehicle on the display screen when reversing, which could increase the risk of an accident

    A12/00872/22 ↗
  • EU Safety GateSerious2020, 2021

    The coolant pump, which is controlled via vacuum, may have a leak between the coolant and vacuum circuits so the coolant may enter the vacuum circuit. If the electric switchover valves are exposed to coolant, due to an…

    Full text

    The coolant pump, which is controlled via vacuum, may have a leak between the coolant and vacuum circuits so the coolant may enter the vacuum circuit. If the electric switchover valves are exposed to coolant, due to an electrochemical reaction, this can lead to a continuous increase in the temperature of the component part, which could cause fire.

    A12/00826/22 ↗
  • EU Safety Gate2018–2020

    The parameters of the gear recognition sensor may be incorrect.As a result, the reversing light may be deactivated inadvertently, increasing the risk of an accident.

    INFO/00154/21 ↗
Show 8 more recalls
  • EU Safety Gate2013–2021

    The functioning of the emergency call system may in some cases be impaired. The communication module software will be updated on affected vehicles.

    INFO/00131/21 ↗
  • EU Safety Gate2019–2021

    Under certain conditions there may be a gear recognition malfunction, causing the reversing light to stop working.

    INFO/00127/21 ↗
  • EU Safety Gate2020

    The bolted connection of the center support to the roof rail may become loose.As a result, the roof load could become detached while the vehicle is in motion or in the event of a crash, leading to increased risk of…

    Full text

    The bolted connection of the center support to the roof rail may become loose.As a result, the roof load could become detached while the vehicle is in motion or in the event of a crash, leading to increased risk of injury and posing a threat to other road users.

    A12/00774/21 ↗
  • EU Safety Gate2020

    The seat frame of the passenger seat may not have been welded correctly. This could increase the risk of injury in the event of an accident.

    A12/00480/21 ↗
  • EU Safety Gate2020

    The functioning of the belt tensioners may be impaired over the lifetime of the vehicle. This could increase the risk of injury in the event of an accident.

    A12/00442/21 ↗
  • EU Safety GateSerious2020

    The wading depth is incorrectly stated in the instructions for use. As a result, the vehicle could be used in inappropriate wading depth conditions, leading to electrical faults and increased risk of fire.

    A12/00410/21 ↗
  • EU Safety Gate2020

    The left-hand side seat frame may not have been tightened with the required torque. This could lead to increased risk of injury in the event of an accident.

    A12/01121/20 ↗
  • EU Safety Gate2019, 2020

    Defective production of the passenger seat may lead to reduced seat strength.

    A12/00739/20 ↗