Mercedes-Benz Vito / V-Class 2020: Zuverlässigkeit
5.170 MOT-Prüfungen von Mercedes-Benz Vito / V-Class mit Erstzulassung 2020: 13,2% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 10,6%.
- Technische Mängelquote
- 13,2%
- Klassenmedian, gleiches Alter und gleiche Laufleistung
- 10,6%
- Durchgefallen (jeder Grund)
- 24,7%
- MOT-Prüfungen
- 5.170
- Rückrufe
- 14
Was nach Laufleistung ausfällt
| Laufleistung | Prüfungen | Technische Mängel | Klassenmedian |
|---|---|---|---|
| 0-50k km | 867 | 4,0% | 4,2% |
| 50-100k km | 2.001 | 11,7% | 10,5% |
| 100-150k km | 1.372 | 17,4% | 12,2% |
| 150k+ km | 930 | 18,8% | 14,2% |
Was bei diesem Baujahr ausfällt
Amtliche Rückrufe
Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.
The drainage pipe for the fuel filter can rub against the underbody panel while driving. This can lead to diesel leakage, creating a risk of accidents, injuries.
A12/00382/23 ↗The controllable coolant pump may have a leak between the coolant and vacuum circuit via negative pressure and allow coolant to enter it. If the electric switchover valves are exposed to coolant, a continuous increase…
A12/01042/22 ↗Volltext
The controllable coolant pump may have a leak between the coolant and vacuum circuit via negative pressure and allow coolant to enter it. If the electric switchover valves are exposed to coolant, a continuous increase in the component part temperature may occur and cause fire. In addition, the brake booster may become damaged over time and reduce brake performance that could lead to an accident.
A coding of a control unit may not match the individual vehicle equipment so that the affected control units may malfunction. As a result, some functions of the electronic stability program control unit may not be fully…
A12/01072/22 ↗Volltext
A coding of a control unit may not match the individual vehicle equipment so that the affected control units may malfunction. As a result, some functions of the electronic stability program control unit may not be fully available, thus changing the braking and control behavior, increasing the risk of an accident.
Incorrect image (frozen picture) information may be displayed by the rear view camera at low temperatures. As a result, the driver will not have an accurate and reliable view of the areas behind the vehicle on the…
A12/00872/22 ↗Volltext
Incorrect image (frozen picture) information may be displayed by the rear view camera at low temperatures. As a result, the driver will not have an accurate and reliable view of the areas behind the vehicle on the display screen when reversing, which could increase the risk of an accident
The coolant pump, which is controlled via vacuum, may have a leak between the coolant and vacuum circuits so the coolant may enter the vacuum circuit. If the electric switchover valves are exposed to coolant, due to an…
A12/00826/22 ↗Volltext
The coolant pump, which is controlled via vacuum, may have a leak between the coolant and vacuum circuits so the coolant may enter the vacuum circuit. If the electric switchover valves are exposed to coolant, due to an electrochemical reaction, this can lead to a continuous increase in the temperature of the component part, which could cause fire.
The parameters of the gear recognition sensor may be incorrect.As a result, the reversing light may be deactivated inadvertently, increasing the risk of an accident.
INFO/00154/21 ↗
8 weitere Rückrufe anzeigen
The functioning of the emergency call system may in some cases be impaired. The communication module software will be updated on affected vehicles.
INFO/00131/21 ↗Under certain conditions there may be a gear recognition malfunction, causing the reversing light to stop working.
INFO/00127/21 ↗The bolted connection of the center support to the roof rail may become loose.As a result, the roof load could become detached while the vehicle is in motion or in the event of a crash, leading to increased risk of…
A12/00774/21 ↗Volltext
The bolted connection of the center support to the roof rail may become loose.As a result, the roof load could become detached while the vehicle is in motion or in the event of a crash, leading to increased risk of injury and posing a threat to other road users.
The seat frame of the passenger seat may not have been welded correctly. This could increase the risk of injury in the event of an accident.
A12/00480/21 ↗The functioning of the belt tensioners may be impaired over the lifetime of the vehicle. This could increase the risk of injury in the event of an accident.
A12/00442/21 ↗The wading depth is incorrectly stated in the instructions for use. As a result, the vehicle could be used in inappropriate wading depth conditions, leading to electrical faults and increased risk of fire.
A12/00410/21 ↗The left-hand side seat frame may not have been tightened with the required torque. This could lead to increased risk of injury in the event of an accident.
A12/01121/20 ↗Defective production of the passenger seat may lead to reduced seat strength.
A12/00739/20 ↗