Ford Transit Custom / Tourneo Custom 2020: reliability
35,678 MOT tests of Ford Transit Custom / Tourneo Custom cars first registered in 2020: 8.2% failed for a mechanical defect; the class median at the same age and mileage is 10.3%.
- Mechanical failure rate
- 8.2%
- Class median, same age and mileage
- 10.3%
- Failed MOT (any reason)
- 21.8%
- MOT tests
- 35,678
- Recalls
- 6
What fails, by mileage
| Mileage | Tests | Mechanical fail | Class median |
|---|---|---|---|
| 0-50k km | 6,292 | 4.2% | 4.2% |
| 50-100k km | 15,730 | 7.6% | 10.5% |
| 100-150k km | 9,603 | 10.2% | 12.2% |
| 150k+ km | 4,053 | 12.3% | 14.2% |
What fails on this year
Official recalls
Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.
A bent anode plate on the high-voltage battery cells could lead to a short circuit, consequently leading to engine failure and the shutdown of the battery, increasing the risk of fire.
SR/03119/25 ↗A faulty part within the high-voltage battery cells could cause the battery to short-circuit and cause a fire.
A12/02543/23 ↗Due to an error in the assembly process, there might be a single, loose screw in the steering support.The loose screw could cause a sudden, temporary blocking of the steering while the vehicle is in motion, increasing…
A12/00853/21 ↗Full text
Due to an error in the assembly process, there might be a single, loose screw in the steering support.The loose screw could cause a sudden, temporary blocking of the steering while the vehicle is in motion, increasing the risk of an accident.
The weld penetration on the left-hand lower control arm does not meet specification.As a result, cracks can be formed on the control arm, increasing the risk of an accident.
A12/01358/20 ↗The lower control arms fitted to vehicles may have missing or partial welds. As a result, the control arms could break, increasing the risk of an accident.
A12/01205/20 ↗The fuse for the electronic Run On Water Pump (ROWP) is inadequate and will not prevent it from overheating in case of failure.This will lead to the melting of the pump body and wiring, increasing the risk of fire.
A12/00937/20 ↗