AutoDefects
Deutsch

Citroën C3 2022: Zuverlässigkeit

91% mehr technische Mängel als die Klasse

233 MOT-Prüfungen von Citroën C3 mit Erstzulassung 2022: 3,4% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 1,8%.

Technische Mängelquote
3,4%
Klassenmedian, gleiches Alter und gleiche Laufleistung
1,8%
Durchgefallen (jeder Grund)
7,3%
MOT-Prüfungen
233
Rückrufe
9

Was nach Laufleistung ausfällt

LaufleistungPrüfungenTechnische MängelKlassenmedian
0-50k km2003,0%1,4%
50-100k km306,7%4,4%
100-150k km30,0%—%

Was bei diesem Baujahr ausfällt

BaugruppeTechnische Mängel
Fahrwerk und Räder0,4%
Bremsen1,7%
Motor, Abgasanlage und Emissionen0,0%
Lenkung0,0%
Karosserie, Rahmen und Rost1,7%
Gurte und Airbags0,0%
Licht und Elektrik (Verschleiß)1,7%
Reifen (Verschleiß)2,6%
Wischer und Scheibe (Verschleiß)0,9%
Sonstiges und Kennzeichen (Verschleiß)0,0%

Amtliche Rückrufe

Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.

  • EU Safety GateErnst2022–2025

    The vehicle may have a fuel leak in the high-pressure hose, between the high-pressure pump and the rail, because of loose nuts. This may cause a fire in the vehicle.

    SR/02935/25 ↗
  • EU Safety Gate2015–2024

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…

    Volltext

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.

    SR/03151/25 ↗
  • EU Safety Gate2017–2023

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…

    Volltext

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.

    SR/02655/25 ↗
  • EU Safety GateErnst2022–2024

    The oil jet cooling nozzles may be damaged. Failure to cool the crankshaft and/or pistons can cause damage to them and result in the engine stalling. This can lead to a hole forming in the engine casing, causing oil…

    Volltext

    The oil jet cooling nozzles may be damaged. Failure to cool the crankshaft and/or pistons can cause damage to them and result in the engine stalling. This can lead to a hole forming in the engine casing, causing oil leaks onto the exhaust pipe. This can cause a fire to start in the engine compartment, causing the vehicle to catch fire.

    SR/00887/25 ↗
  • EU Safety Gate2022, 2023

    Due to a faulty software of the electronic engine control unit (ECU), an incorrect value may be given when the data are processed by the vehicle. This may result in nitrogen oxide (NOx) emissions above the regulatory…

    Volltext

    Due to a faulty software of the electronic engine control unit (ECU), an incorrect value may be given when the data are processed by the vehicle. This may result in nitrogen oxide (NOx) emissions above the regulatory limits. Excessive NOx emissions pose a risk to the environment.

    SR/00435/25 ↗
  • EU Safety Gate2019–2022

    A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.

    A12/01876/23 ↗
3 weitere Rückrufe anzeigen
  • EU Safety Gate2022

    Due to the insufficient hardness of the steel, cracks may appear in the rear axle cross member. This affects the vehicle’s handling, increasing the risk of an accident.

    A12/01766/23 ↗
  • EU Safety Gate2022

    Insufficient tightening of screws could lead to the uncoupling of a connection between a wheel and the axle arm (front and rear), a rupture of the parking brake cable and/or a door opening unexpectedly during driving,…

    Volltext

    Insufficient tightening of screws could lead to the uncoupling of a connection between a wheel and the axle arm (front and rear), a rupture of the parking brake cable and/or a door opening unexpectedly during driving, creating a risk of an accident.

    A12/00437/23 ↗
  • EU Safety Gate2022

    Due to improper bolts of certain components (brake caliper, rear axle mount, ratchet wheel, ABS sensor, brake hose, brake hose bracket, front control arm, horizontal front control arm, anti-roll bar, power steering),…

    Volltext

    Due to improper bolts of certain components (brake caliper, rear axle mount, ratchet wheel, ABS sensor, brake hose, brake hose bracket, front control arm, horizontal front control arm, anti-roll bar, power steering), the affected parts may be lost or damaged. This could lead to various malfunctions, such as a loss of connection between the rear wheel and axle tie rod, or a rupture of the rear brake line while the vehicle is in motion, increasing the risk of an accident.

    A12/00095/23 ↗