AutoDefects
Deutsch

Citroën C3 2014: Zuverlässigkeit

18% mehr technische Mängel als die Klasse

13.914 MOT-Prüfungen von Citroën C3 mit Erstzulassung 2014: 22,8% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 19,4%.

Technische Mängelquote
22,8%
Klassenmedian, gleiches Alter und gleiche Laufleistung
19,4%
Durchgefallen (jeder Grund)
36,1%
MOT-Prüfungen
13.914
Rückrufe
5

Was nach Laufleistung ausfällt

LaufleistungPrüfungenTechnische MängelKlassenmedian
0-50k km1.6518,7%7,9%
50-100k km6.15619,9%16,0%
100-150k km4.36528,5%24,1%
150k+ km1.74232,4%30,0%

Was bei diesem Baujahr ausfällt

BaugruppeTechnische Mängel
Fahrwerk und Räder8,9%
Bremsen5,8%
Motor, Abgasanlage und Emissionen5,1%
Lenkung3,2%
Karosserie, Rahmen und Rost8,8%
Gurte und Airbags0,6%
Licht und Elektrik (Verschleiß)16,3%
Reifen (Verschleiß)6,5%
Wischer und Scheibe (Verschleiß)4,9%
Sonstiges und Kennzeichen (Verschleiß)0,2%

Amtliche Rückrufe

Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.

  • EU Safety GateErnst2009–2017

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event…

    Volltext

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants.

    A12/01043/21 ↗
  • EU Safety GateErnst2009–2017

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event…

    Volltext

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01369/21 ↗
  • EU Safety Gate2014–2018

    The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of…

    Volltext

    The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01186/21 ↗
  • EU Safety GateErnst2014–2017

    The vacuum pump may be damaged by certain materials resulting from chemical corrosion of the timing belt associated with degraded oil.That can lead to reduction or loss of braking assistance, increasing the risk of an…

    Volltext

    The vacuum pump may be damaged by certain materials resulting from chemical corrosion of the timing belt associated with degraded oil.That can lead to reduction or loss of braking assistance, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01042/21 ↗
  • EU Safety Gate2014

    null The tightening torque of the mounting bolts on the front triangular control arm on the sub-frame could be insufficient. Over time, this could result in the bolts loosening. In the worst-case scenario, this could…

    Volltext

    null The tightening torque of the mounting bolts on the front triangular control arm on the sub-frame could be insufficient. Over time, this could result in the bolts loosening. In the worst-case scenario, this could lead to a loss in driving stability and affect the steering.

    A12/0653/15 ↗