AutoDefects
Español

Citroën C3 2014: fiabilidad

12 % más fallos mecánicos que su clase

13.914 inspecciones MOT de Citroën C3 matriculados por primera vez en 2014: el 22,8 % no pasó por un defecto mecánico; la mediana de su clase con la misma edad y kilometraje es del 20,4 %.

Tasa de fallo mecánico
22,8%
Mediana de la clase, misma edad y kilometraje
20,4%
No pasó la MOT (cualquier motivo)
36,1%
inspecciones MOT
13.914
Llamadas a revisión
5

Qué falla según el kilometraje

KilometrajeInspeccionesFallo mecánicoMediana de la clase
0-50k km16518,7%8,7%
50-100k km615619,9%17,6%
100-150k km436528,5%24,5%
150k+ km174232,4%30,8%

Qué falla en este año

SistemaFallo mecánico
Suspensión y ruedas8,9%
Frenos5,8%
Motor, escape y emisiones5,1%
Dirección3,2%
Carrocería, bastidor y corrosión8,8%
Cinturones y airbags0,6%
Luces y electricidad (desgaste)16,3%
Neumáticos (desgaste)6,5%
Escobillas y parabrisas (desgaste)4,9%
Otros y matrículas (desgaste)0,2%

Llamadas a revisión oficiales

Campañas publicadas por la NHTSA (EE. UU.) y el EU Safety Gate que citan este modelo. Comprueba por VIN si afecta a un coche concreto.

  • EU Safety GateGrave2009–2017

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event…

    Texto completo

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants.

    A12/01043/21 ↗
  • EU Safety GateGrave2009–2017

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event…

    Texto completo

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01369/21 ↗
  • EU Safety Gate2014–2018

    The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of…

    Texto completo

    The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01186/21 ↗
  • EU Safety GateGrave2014–2017

    The vacuum pump may be damaged by certain materials resulting from chemical corrosion of the timing belt associated with degraded oil.That can lead to reduction or loss of braking assistance, increasing the risk of an…

    Texto completo

    The vacuum pump may be damaged by certain materials resulting from chemical corrosion of the timing belt associated with degraded oil.That can lead to reduction or loss of braking assistance, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01042/21 ↗
  • EU Safety Gate2014

    null The tightening torque of the mounting bolts on the front triangular control arm on the sub-frame could be insufficient. Over time, this could result in the bolts loosening. In the worst-case scenario, this could…

    Texto completo

    null The tightening torque of the mounting bolts on the front triangular control arm on the sub-frame could be insufficient. Over time, this could result in the bolts loosening. In the worst-case scenario, this could lead to a loss in driving stability and affect the steering.

    A12/0653/15 ↗