Citroën C3 2021: fiabilidad
8433 inspecciones MOT de Citroën C3 matriculados por primera vez en 2021: el 3,6 % no pasó por un defecto mecánico; la mediana de su clase con la misma edad y kilometraje es del 2,8 %.
- Tasa de fallo mecánico
- 3,6%
- Mediana de la clase, misma edad y kilometraje
- 2,8%
- No pasó la MOT (cualquier motivo)
- 9,2%
- inspecciones MOT
- 8433
- Llamadas a revisión
- 7
Qué falla según el kilometraje
| Kilometraje | Inspecciones | Fallo mecánico | Mediana de la clase |
|---|---|---|---|
| 0-50k km | 6623 | 2,6% | 1,9% |
| 50-100k km | 1671 | 6,7% | 5,9% |
| 100-150k km | 122 | 12,3% | 8,0% |
| 150k+ km | 17 | 23,5% | 9,6% |
Qué falla en este año
Llamadas a revisión oficiales
Campañas publicadas por la NHTSA (EE. UU.) y el EU Safety Gate que citan este modelo. Comprueba por VIN si afecta a un coche concreto.
The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…
SR/03151/25 ↗Texto completo
The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…
SR/02655/25 ↗Texto completo
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.
A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.
A12/01876/23 ↗Improperly tightened rear axle components can result in loss or damage to the affected part (rod for the wheel and the chassis, brake caliper, rear axle fixing, ABS sensor, brake housing, brake housing support). This…
A11/00056/22 ↗Texto completo
Improperly tightened rear axle components can result in loss or damage to the affected part (rod for the wheel and the chassis, brake caliper, rear axle fixing, ABS sensor, brake housing, brake housing support). This can lead to a loss of driving stability, increasing the risk of an accident.
Incorrect tightening torques of some fastenings on the rear axle can lead to a loosening of connections. This may lead to the deterioration in braking performance, loss of control over the vehicle and even to a loss of…
A12/00511/22 ↗Texto completo
Incorrect tightening torques of some fastenings on the rear axle can lead to a loosening of connections. This may lead to the deterioration in braking performance, loss of control over the vehicle and even to a loss of a wheel, thereby endangering the surrounding traffic.
The outer pinion of the right driveshaft may break due to lack of heat treatment during the manufacture of the part which may lead to a break in the transmission shaft. The engine will still run, but there is no torque…
A12/00028/22 ↗Texto completo
The outer pinion of the right driveshaft may break due to lack of heat treatment during the manufacture of the part which may lead to a break in the transmission shaft. The engine will still run, but there is no torque transmission to the drive wheels increasing the risk of an accident.
Mostrar 1 llamadas más
The fixing screws for the ball joints may be missing.This could lead to a loss of control over the vehicle during driving, increasing the risk of an accident.
A12/00957/21 ↗