AutoDefects
Deutsch

Citroën C3 2012: Zuverlässigkeit

12% mehr technische Mängel als die Klasse

15.055 MOT-Prüfungen von Citroën C3 mit Erstzulassung 2012: 30,0% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 26,7%.

Technische Mängelquote
30,0%
Klassenmedian, gleiches Alter und gleiche Laufleistung
26,7%
Durchgefallen (jeder Grund)
45,1%
MOT-Prüfungen
15.055
Rückrufe
2

Was nach Laufleistung ausfällt

LaufleistungPrüfungenTechnische MängelKlassenmedian
0-50k km66913,0%9,9%
50-100k km4.42222,7%19,4%
100-150k km5.95431,6%28,7%
150k+ km4.01038,5%34,6%

Was bei diesem Baujahr ausfällt

BaugruppeTechnische Mängel
Fahrwerk und Räder14,6%
Bremsen7,7%
Motor, Abgasanlage und Emissionen3,5%
Lenkung7,0%
Karosserie, Rahmen und Rost9,7%
Gurte und Airbags0,9%
Licht und Elektrik (Verschleiß)24,4%
Reifen (Verschleiß)7,7%
Wischer und Scheibe (Verschleiß)6,4%
Sonstiges und Kennzeichen (Verschleiß)0,2%

Amtliche Rückrufe

Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.

  • EU Safety GateErnst2009–2017

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event…

    Volltext

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants.

    A12/01043/21 ↗
  • EU Safety GateErnst2009–2017

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event…

    Volltext

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01369/21 ↗