AutoDefects
Deutsch

Citroën C3 2013: Zuverlässigkeit

4% mehr technische Mängel als die Klasse

13.590 MOT-Prüfungen von Citroën C3 mit Erstzulassung 2013: 25,6% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 24,6%.

Technische Mängelquote
25,6%
Klassenmedian, gleiches Alter und gleiche Laufleistung
24,6%
Durchgefallen (jeder Grund)
40,7%
MOT-Prüfungen
13.590
Rückrufe
4

Was nach Laufleistung ausfällt

LaufleistungPrüfungenTechnische MängelKlassenmedian
0-50k km9419,8%9,0%
50-100k km4.80319,7%19,7%
100-150k km5.09029,3%27,6%
150k+ km2.75634,6%32,7%

Was bei diesem Baujahr ausfällt

BaugruppeTechnische Mängel
Fahrwerk und Räder10,5%
Bremsen6,7%
Motor, Abgasanlage und Emissionen5,7%
Lenkung4,1%
Karosserie, Rahmen und Rost9,6%
Gurte und Airbags0,6%
Licht und Elektrik (Verschleiß)20,3%
Reifen (Verschleiß)8,0%
Wischer und Scheibe (Verschleiß)6,2%
Sonstiges und Kennzeichen (Verschleiß)0,3%

Amtliche Rückrufe

Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.

  • EU Safety GateErnst2009–2017

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event…

    Volltext

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants.

    A12/01043/21 ↗
  • EU Safety GateErnst2009–2017

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event…

    Volltext

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01369/21 ↗
  • EU Safety Gate2013

    null The front wishbone fixing bolts may be defective and could break resulting in a change in the driving and steering behaviour of the car.

    A12/1363/14 ↗
  • EU Safety Gate2013

    null The swivel joint mounting bracket for the tailgate strut could fail. If so, the tailgate could not be guaranteed to remain open.

    A12/1109/14 ↗