AutoDefects
Polski

Citroën C3 2013: niezawodność

o 5% więcej usterek mechanicznych niż w klasie

13 590 badań MOT egzemplarzy Citroën C3 zarejestrowanych po raz pierwszy w 2013: 25,6% nie przeszło z powodu usterki mechanicznej; mediana klasy w tym samym wieku i z tym samym przebiegiem to 24,4%.

Usterki mechaniczne
25,6%
Mediana klasy, ten sam wiek i przebieg
24,4%
Negatywne badanie (dowolny powód)
40,7%
badań MOT
13 590
Akcje przywoławcze
4

Co się psuje w zależności od przebiegu

PrzebiegBadaniaUsterki mechaniczneMediana klasy
0-50k km9419,8%8,3%
50-100k km480319,7%19,3%
100-150k km509029,3%27,6%
150k+ km275634,6%32,6%

Co się psuje w tym roczniku

UkładUsterki mechaniczne
Zawieszenie i koła10,5%
Hamulce6,7%
Silnik, wydech i emisja5,7%
Układ kierowniczy4,1%
Nadwozie, podwozie i korozja9,6%
Pasy i poduszki powietrzne0,6%
Oświetlenie i elektryka (eksploatacja)20,3%
Opony (eksploatacja)8,0%
Wycieraczki i szyba (eksploatacja)6,2%
Inne i tablice (eksploatacja)0,3%

Oficjalne akcje przywoławcze

Akcje opublikowane przez NHTSA (USA) i EU Safety Gate, w których wymieniono ten model. Czy dotyczą konkretnego auta, sprawdź po VIN.

  • EU Safety GatePoważne2009–2017

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event…

    Pełny tekst

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants.

    A12/01043/21 ↗
  • EU Safety GatePoważne2009–2017

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event…

    Pełny tekst

    The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01369/21 ↗
  • EU Safety Gate2013

    null The front wishbone fixing bolts may be defective and could break resulting in a change in the driving and steering behaviour of the car.

    A12/1363/14 ↗
  • EU Safety Gate2013

    null The swivel joint mounting bracket for the tailgate strut could fail. If so, the tailgate could not be guaranteed to remain open.

    A12/1109/14 ↗