Citroën C3 2013: reliability
13,590 MOT tests of Citroën C3 cars first registered in 2013: 25.6% failed for a mechanical defect; the class median at the same age and mileage is 24.6%.
- Mechanical failure rate
- 25.6%
- Class median, same age and mileage
- 24.6%
- Failed MOT (any reason)
- 40.7%
- MOT tests
- 13,590
- Recalls
- 4
What fails, by mileage
| Mileage | Tests | Mechanical fail | Class median |
|---|---|---|---|
| 0-50k km | 941 | 9.8% | 9.0% |
| 50-100k km | 4,803 | 19.7% | 19.7% |
| 100-150k km | 5,090 | 29.3% | 27.6% |
| 150k+ km | 2,756 | 34.6% | 32.7% |
What fails on this year
Official recalls
Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.
The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event…
A12/01043/21 ↗Full text
The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants.
The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event…
A12/01369/21 ↗Full text
The propellant airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
null The front wishbone fixing bolts may be defective and could break resulting in a change in the driving and steering behaviour of the car.
A12/1363/14 ↗null The swivel joint mounting bracket for the tailgate strut could fail. If so, the tailgate could not be guaranteed to remain open.
A12/1109/14 ↗