AutoDefects
English

Citroën C3 2020: reliability

5% more mechanical failures than the class

7,923 MOT tests of Citroën C3 cars first registered in 2020: 4.6% failed for a mechanical defect; the class median at the same age and mileage is 4.4%.

Mechanical failure rate
4.6%
Class median, same age and mileage
4.4%
Failed MOT (any reason)
10.9%
MOT tests
7,923
Recalls
5

What fails, by mileage

MileageTestsMechanical failClass median
0-50k km5,3913.1%3.1%
50-100k km2,2697.3%6.6%
100-150k km2489.7%9.8%
150k+ km1513.3%12.3%

What fails on this year

SystemMechanical fail
Suspension and wheels0.4%
Brakes2.5%
Engine, exhaust and emissions0.7%
Steering0.1%
Body, chassis and corrosion1.2%
Seat belts and airbags0.1%
Lights and electrics (wear)3.8%
Tyres (wear)3.1%
Wipers and windscreen (wear)1.2%
Other and plates (wear)0.0%

Official recalls

Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.

  • EU Safety Gate2015–2024

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…

    Full text

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.

    SR/03151/25 ↗
  • EU Safety Gate2017–2023

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…

    Full text

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.

    SR/02655/25 ↗
  • EU Safety Gate2019–2022

    A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.

    A12/01876/23 ↗
  • EU Safety Gate2020, 2021

    The fixing screws for the ball joints may be missing.This could lead to a loss of control over the vehicle during driving, increasing the risk of an accident.

    A12/00957/21 ↗
  • EU Safety Gate2019, 2020

    The wheel alignment of the front axle may be incorrect. This may result in unstable road handling of the vehicle, increasing the risk of an accident.

    A12/01172/20 ↗