AutoDefects
English

Citroën C3 2022: reliability

91% more mechanical failures than the class

233 MOT tests of Citroën C3 cars first registered in 2022: 3.4% failed for a mechanical defect; the class median at the same age and mileage is 1.8%.

Mechanical failure rate
3.4%
Class median, same age and mileage
1.8%
Failed MOT (any reason)
7.3%
MOT tests
233
Recalls
9

What fails, by mileage

MileageTestsMechanical failClass median
0-50k km2003.0%1.4%
50-100k km306.7%4.4%
100-150k km30.0%—%

What fails on this year

SystemMechanical fail
Suspension and wheels0.4%
Brakes1.7%
Engine, exhaust and emissions0.0%
Steering0.0%
Body, chassis and corrosion1.7%
Seat belts and airbags0.0%
Lights and electrics (wear)1.7%
Tyres (wear)2.6%
Wipers and windscreen (wear)0.9%
Other and plates (wear)0.0%

Official recalls

Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.

  • EU Safety GateSerious2022–2025

    The vehicle may have a fuel leak in the high-pressure hose, between the high-pressure pump and the rail, because of loose nuts. This may cause a fire in the vehicle.

    SR/02935/25 ↗
  • EU Safety Gate2015–2024

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…

    Full text

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.

    SR/03151/25 ↗
  • EU Safety Gate2017–2023

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…

    Full text

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.

    SR/02655/25 ↗
  • EU Safety GateSerious2022–2024

    The oil jet cooling nozzles may be damaged. Failure to cool the crankshaft and/or pistons can cause damage to them and result in the engine stalling. This can lead to a hole forming in the engine casing, causing oil…

    Full text

    The oil jet cooling nozzles may be damaged. Failure to cool the crankshaft and/or pistons can cause damage to them and result in the engine stalling. This can lead to a hole forming in the engine casing, causing oil leaks onto the exhaust pipe. This can cause a fire to start in the engine compartment, causing the vehicle to catch fire.

    SR/00887/25 ↗
  • EU Safety Gate2022, 2023

    Due to a faulty software of the electronic engine control unit (ECU), an incorrect value may be given when the data are processed by the vehicle. This may result in nitrogen oxide (NOx) emissions above the regulatory…

    Full text

    Due to a faulty software of the electronic engine control unit (ECU), an incorrect value may be given when the data are processed by the vehicle. This may result in nitrogen oxide (NOx) emissions above the regulatory limits. Excessive NOx emissions pose a risk to the environment.

    SR/00435/25 ↗
  • EU Safety Gate2019–2022

    A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.

    A12/01876/23 ↗
Show 3 more recalls
  • EU Safety Gate2022

    Due to the insufficient hardness of the steel, cracks may appear in the rear axle cross member. This affects the vehicle’s handling, increasing the risk of an accident.

    A12/01766/23 ↗
  • EU Safety Gate2022

    Insufficient tightening of screws could lead to the uncoupling of a connection between a wheel and the axle arm (front and rear), a rupture of the parking brake cable and/or a door opening unexpectedly during driving,…

    Full text

    Insufficient tightening of screws could lead to the uncoupling of a connection between a wheel and the axle arm (front and rear), a rupture of the parking brake cable and/or a door opening unexpectedly during driving, creating a risk of an accident.

    A12/00437/23 ↗
  • EU Safety Gate2022

    Due to improper bolts of certain components (brake caliper, rear axle mount, ratchet wheel, ABS sensor, brake hose, brake hose bracket, front control arm, horizontal front control arm, anti-roll bar, power steering),…

    Full text

    Due to improper bolts of certain components (brake caliper, rear axle mount, ratchet wheel, ABS sensor, brake hose, brake hose bracket, front control arm, horizontal front control arm, anti-roll bar, power steering), the affected parts may be lost or damaged. This could lead to various malfunctions, such as a loss of connection between the rear wheel and axle tie rod, or a rupture of the rear brake line while the vehicle is in motion, increasing the risk of an accident.

    A12/00095/23 ↗