Kleinwagen
Citroën C3: Zuverlässigkeit
Bei 194.632 britischen MOT-Prüfungen fielen 22,9% der Citroën C3 wegen eines technischen oder Karosseriemangels durch. Median eines Kleinwagens gleichen Alters und gleicher Laufleistung: 20,1%.
- Beste Baujahre
- —
- Baujahre mit den meisten Mängeln
- 2015, 2016, 2021
- Schwachstelle bei hoher Laufleistung
- Karosserie, Rahmen und Rost, Fahrwerk und Räder, Lenkung
- Amtliche Rückrufe
- 9 Rückrufe, davon 5 ernst
- Technische Mängelquote
- 22,9%
- Klassenmedian, gleiches Alter und gleiche Laufleistung
- 20,1%
- MOT-Prüfungen
- 194.632
- Beschwerden von US-Haltern
- 0
Mängelquote nach Jahr der Erstzulassung
Technische Mängelquote bei der MOT-Prüfung 2024 nach Jahr der Erstzulassung, verglichen mit dem Klassenmedian bei gleichem Alter und gleicher Laufleistung.
| Jahr | Prüfungen | Technische Mängel | Klassenmedian | Alle Mängel | Rückrufe |
|---|---|---|---|---|---|
| 2022 | 233 | 3,4% | 2,0% | 7,3% | 5 |
| 2021 | 8.433 | 3,6% | 2,8% | 9,2% | 2 |
| 2020 | 7.923 | 4,6% | 4,0% | 10,9% | 2 |
| 2019 | 13.577 | 6,2% | 5,5% | 15,4% | 2 |
| 2018 | 15.930 | 9,0% | 9,2% | 20,2% | 2 |
| 2017 | 15.641 | 14,3% | 13,0% | 24,9% | 2 |
| 2016 | 8.855 | 17,2% | 13,9% | 30,7% | 1 |
| 2015 | 12.282 | 19,7% | 14,5% | 33,1% | 1 |
| 2014 | 13.914 | 22,8% | 19,4% | 36,1% | 0 |
| 2013 | 13.590 | 25,6% | 24,4% | 40,7% | 0 |
| 2012 | 15.055 | 30,0% | 26,7% | 45,1% | 0 |
| 2011 | 15.481 | 33,6% | 28,5% | 47,2% | 0 |
| 2010 | 18.372 | 36,3% | 29,9% | 48,5% | 0 |
| 2009 | 9.530 | 36,1% | 30,9% | 49,6% | 0 |
| 2008 | 4.917 | 35,8% | 31,7% | 48,6% | 0 |
| 2007 | 5.331 | 33,3% | 31,5% | 48,7% | 0 |
| 2006 | 4.727 | 32,8% | 32,1% | 47,7% | 0 |
| 2005 | 4.029 | 35,6% | 34,3% | 50,1% | 0 |
| 2004 | 3.264 | 35,0% | 33,0% | 50,3% | 0 |
Was nach Laufleistung ausfällt
Anteil der Prüfungen, die an der jeweiligen Baugruppe scheiterten. Verschleißteile (Lampen, Reifen, Wischer, Kennzeichen) zählen nicht zum Zuverlässigkeitswert.
(…) = Klassenmedian, gleiches Alter und gleiche Laufleistung
Checkliste für die Werkstatt vor dem Kauf
Abgeleitet aus den Baugruppen, bei denen dieses Modell ab 100.000 km häufiger durchfällt als seine Klasse, und aus offenen Rückrufen.
- Karosserie und Rahmen: Schweller, Hilfsrahmen, Wagenheberaufnahmen und Boden auf Rost und Reparaturspuren prüfen.
- Fahrwerk und Räder: Querlenker, Buchsen, Traggelenke, Federn und Stoßdämpfer auf Spiel, Risse und Undichtigkeiten prüfen; auf ungleichmäßigen Reifenverschleiß achten.
- Lenkung: Spiel in Lenkgetriebe, Spurstangen und -köpfen, Undichtigkeiten der Servolenkung und Geräusche bei Volleinschlag prüfen.
- Rückrufe: Nachweis verlangen, dass offene Rückrufarbeiten für dieses Modell erledigt sind (die Werkstatt prüft per FIN).
Amtliche Rückrufe
Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.
Due to a defect in the engine control unit (inverter) in vehicles equipped with electrified dual-clutch transmission (e-DCT), metal soldering residues may pass into the unit. This can cause internal electric short…
SR/01382/26 ↗Volltext
Due to a defect in the engine control unit (inverter) in vehicles equipped with electrified dual-clutch transmission (e-DCT), metal soldering residues may pass into the unit. This can cause internal electric short circuits which, can lead to continuous power supply and overheating due to a blocked relay, and cause a fire.
The electric power steering harness being routed between two screws, and slight vibrations may cause damage during steering operations. This may cause a short circuit, leading to a loss of power steering assistance…
SR/00905/26 ↗Volltext
The electric power steering harness being routed between two screws, and slight vibrations may cause damage during steering operations. This may cause a short circuit, leading to a loss of power steering assistance and/or a fire in the passenger compartment.
There is insufficient clearance (< 10 mm), between the tube of the petrol particulate filter and the terminal protection cap of the 48 V belt-driven starter alternator. In wet conditions, the insufficient clearance and…
SR/00841/26 ↗Volltext
There is insufficient clearance (< 10 mm), between the tube of the petrol particulate filter and the terminal protection cap of the 48 V belt-driven starter alternator. In wet conditions, the insufficient clearance and contact between these components can lead to water infiltration, causing an electric arc which may trigger a thermal event, such as overheating. There is a risk of fire.
The vehicle may have a fuel leak in the high-pressure hose, between the high-pressure pump and the rail, because of loose nuts. This may cause a fire in the vehicle.
SR/02935/25 ↗The brake pedal support may not be attached securely enough due to a missing or poorly assembled pin. If the pin falls, the brake pedal could disengage, making it impossible to stop the vehicle. This may lead to…
SR/04252/25 ↗Volltext
The brake pedal support may not be attached securely enough due to a missing or poorly assembled pin. If the pin falls, the brake pedal could disengage, making it impossible to stop the vehicle. This may lead to injuries. If the brake pedal fails, the electronic parking brake on the centre console may be used while driving to slow the vehicle down to a controlled stop. Furthermore, when active, the automatic emergency braking system intervenes when it detects an imminent collision.
The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…
SR/03151/25 ↗Volltext
The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.
3 weitere Rückrufe anzeigen
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…
SR/02655/25 ↗Volltext
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.
The oil jet cooling nozzles may be damaged. Failure to cool the crankshaft and/or pistons can cause damage to them and result in the engine stalling. This can lead to a hole forming in the engine casing, causing oil…
SR/00887/25 ↗Volltext
The oil jet cooling nozzles may be damaged. Failure to cool the crankshaft and/or pistons can cause damage to them and result in the engine stalling. This can lead to a hole forming in the engine casing, causing oil leaks onto the exhaust pipe. This can cause a fire to start in the engine compartment, causing the vehicle to catch fire.
Due to a faulty software of the electronic engine control unit (ECU), an incorrect value may be given when the data are processed by the vehicle. This may result in nitrogen oxide (NOx) emissions above the regulatory…
SR/00435/25 ↗Volltext
Due to a faulty software of the electronic engine control unit (ECU), an incorrect value may be given when the data are processed by the vehicle. This may result in nitrogen oxide (NOx) emissions above the regulatory limits. Excessive NOx emissions pose a risk to the environment.