Kleinwagen
Nissan Micra: Zuverlässigkeit
Bei 246.441 britischen MOT-Prüfungen fielen 22,9% der Nissan Micra wegen eines technischen oder Karosseriemangels durch. Median eines Kleinwagens gleichen Alters und gleicher Laufleistung: 23,4%.
- Beste Baujahre
- 2006, 2008, 2009
- Baujahre mit den meisten Mängeln
- 2017, 2018, 2019
- Schwachstelle bei hoher Laufleistung
- Fahrwerk und Räder, Gurte und Airbags
- Amtliche Rückrufe
- 13 Rückrufe, davon 6 ernst
- Technische Mängelquote
- 22,9%
- Klassenmedian, gleiches Alter und gleiche Laufleistung
- 23,4%
- MOT-Prüfungen
- 246.441
- Beschwerden von US-Haltern
- 0
MOT-Ergebnisse nach Prüfjahr
Alle Fahrzeuge dieses Modells bei der Prüfung des jeweiligen Jahres im Vergleich mit der Klasse bei gleichem Alter und gleicher Laufleistung. Zeigt, ob das Modell mit dem Alter mithält.
| Prüfjahr | Prüfungen | Technische Mängel | Klassenmedian | Alle Mängel |
|---|---|---|---|---|
| 2024 | 246.441 | 22,9% | 23,4% | 36,1% |
| 2023 | 255.191 | 22,4% | 23,2% | 35,7% |
Mängelquote nach Jahr der Erstzulassung
Technische Mängelquote bei der MOT-Prüfung 2024 nach Jahr der Erstzulassung, verglichen mit dem Klassenmedian bei gleichem Alter und gleicher Laufleistung.
| Jahr | Prüfungen | Technische Mängel | Klassenmedian | Alle Mängel | Rückrufe |
|---|---|---|---|---|---|
| 2022 | 289 | 3,5% | 1,7% | 7,3% | 0 |
| 2021 | 6.779 | 3,0% | 2,3% | 8,9% | 1 |
| 2020 | 6.210 | 5,5% | 3,9% | 12,1% | 1 |
| 2019 | 8.597 | 8,0% | 5,2% | 16,6% | 1 |
| 2018 | 9.964 | 16,2% | 10,1% | 22,8% | 1 |
| 2017 | 12.628 | 20,8% | 12,1% | 28,4% | 5 |
| 2016 | 10.695 | 14,6% | 12,8% | 24,5% | 4 |
| 2015 | 12.947 | 15,1% | 14,0% | 26,2% | 3 |
| 2014 | 14.026 | 19,7% | 17,3% | 30,3% | 3 |
| 2013 | 11.482 | 22,1% | 20,6% | 33,4% | 3 |
| 2012 | 11.469 | 24,2% | 22,9% | 36,9% | 2 |
| 2011 | 12.571 | 24,4% | 24,0% | 38,3% | 2 |
| 2010 | 15.555 | 23,7% | 26,3% | 39,5% | 2 |
| 2009 | 15.483 | 23,7% | 27,9% | 40,5% | 1 |
| 2008 | 14.076 | 25,0% | 31,2% | 41,1% | 2 |
| 2007 | 12.935 | 27,6% | 31,5% | 44,7% | 2 |
| 2006 | 17.078 | 26,9% | 33,4% | 45,3% | 1 |
| 2005 | 14.806 | 29,9% | 34,0% | 48,7% | 1 |
| 2004 | 10.338 | 30,7% | 33,6% | 48,2% | 1 |
Ältere Baujahre (14)
| Jahr | Prüfungen | Technische Mängel | Klassenmedian | Alle Mängel | Rückrufe |
|---|---|---|---|---|---|
| 2003 | 9.269 | 32,8% | 34,1% | 48,3% | 1 |
| 2002 | 6.920 | 33,8% | 31,6% | 45,8% | 1 |
| 2001 | 4.092 | 35,5% | 32,1% | 45,9% | 1 |
| 2000 | 2.674 | 37,0% | 33,9% | 47,5% | 0 |
| 1999 | 2.104 | 34,6% | 34,4% | 45,3% | 0 |
| 1998 | 1.273 | 36,1% | 35,5% | 46,0% | 0 |
| 1997 | 663 | 34,4% | 34,8% | 46,5% | 0 |
| 1996 | 506 | 36,8% | 34,7% | 47,0% | 0 |
| 1995 | 292 | 32,5% | 31,3% | 43,2% | 0 |
| 1994 | 240 | 32,1% | 27,4% | 41,7% | 0 |
| 1993 | 147 | 34,0% | 33,5% | 38,8% | 0 |
| 1992 | 118 | 23,7% | 23,4% | 31,4% | 0 |
| 1991 | 117 | 28,2% | 20,3% | 33,3% | 0 |
| 1990 | 96 | 39,6% | 25,4% | 43,8% | 0 |
Was nach Laufleistung ausfällt
Anteil der Prüfungen, die an der jeweiligen Baugruppe scheiterten. Verschleißteile (Lampen, Reifen, Wischer, Kennzeichen) zählen nicht zum Zuverlässigkeitswert.
(…) = Klassenmedian, gleiches Alter und gleiche Laufleistung
Checkliste für die Werkstatt vor dem Kauf
Abgeleitet aus den Baugruppen, bei denen dieses Modell ab 100.000 km häufiger durchfällt als seine Klasse, und aus offenen Rückrufen.
- Fahrwerk und Räder: Querlenker, Buchsen, Traggelenke, Federn und Stoßdämpfer auf Spiel, Risse und Undichtigkeiten prüfen; auf ungleichmäßigen Reifenverschleiß achten.
- Gurte und Airbags: Jeder Gurt muss einrollen und einrasten, die Airbag-Leuchte nach dem Start erlöschen.
- Rückrufe: 5 ernste Rückrufe betreffen dieses Modell – lassen Sie sich die Erledigung nachweisen
- SR/00954/26 · 2025 · A production anomaly at the supplier’s facility may cause delamination of the anode in a battery cell, where electrode material detaches…
- A12/00793/23 · 2016–2021 · The driver's seat may be faulty, which can cause the seat belt anchorages not to function as intended, creating a risk of injury in the…
- A12/00067/19 · 2016, 2017 · Cracks can be developed in the passenger airbag. This will impair it's protective function, increasing the risk of injury in the event of…
- A12/0530/18 · 2017 · The seat belt retractor internal car sensor may not function as intended. In the event of an accident, the retractors could fail to lock…
- A12/0872/15 · 2001–2008 · null There is a possibility that the lower pinion needle bearing may have been omitted from the steering system during manufacture. If this…
Ein bestimmtes Auto per FIN auf den offiziellen Seiten prüfen: NHTSA (US) · DVSA (UK)
Amtliche Rückrufe
Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.
A production anomaly at the supplier’s facility may cause delamination of the anode in a battery cell, where electrode material detaches and can damage the current collector and separator, potentially leading to an…
SR/00954/26 ↗Volltext
A production anomaly at the supplier’s facility may cause delamination of the anode in a battery cell, where electrode material detaches and can damage the current collector and separator, potentially leading to an internal short circuit in the traction battery and resulting in loss of autonomy, inability to recharge, or thermal runaway which could lead to a fire.
The driver's seat may be faulty, which can cause the seat belt anchorages not to function as intended, creating a risk of injury in the case of an accident.
A12/00793/23 ↗Cracks can be developed in the passenger airbag. This will impair it's protective function, increasing the risk of injury in the event of an accident.
A12/00067/19 ↗Cracks may form in the front wheel hub. The front wheel hub could consequently break leading to the front wheel become detached.
A12/0529/18 ↗The seat belt retractor internal car sensor may not function as intended. In the event of an accident, the retractors could fail to lock and in such circumstances the seatbelt would not restrain the occupant.
A12/0530/18 ↗null The ignition switch harness may not be correctly locked in position. As a result the connector may disconnect, which could result in engine shut down while driving with no possibility to restart.
A12/1150/17 ↗
7 weitere Rückrufe anzeigen
null As a result of a design change to the engine ignition coils fitted, the internal electrical components of the coil may short circuit resulting in an engine misfire. In the worst case, this short circuit may cause a…
A12/0110/16 ↗Volltext
null As a result of a design change to the engine ignition coils fitted, the internal electrical components of the coil may short circuit resulting in an engine misfire. In the worst case, this short circuit may cause a fuse inside the Power Distribution Module (IPDM) to fail, stopping power to the ignition relay. This may cause the engine to stall.
null There is a possibility that the lower pinion needle bearing may have been omitted from the steering system during manufacture. If this is the case, the upper bearing would be overloaded and, if left in this…
A12/0872/15 ↗Volltext
null There is a possibility that the lower pinion needle bearing may have been omitted from the steering system during manufacture. If this is the case, the upper bearing would be overloaded and, if left in this condition, the pinion may disengage causing loss of steering control.
null The push engine start switch may remain in the pressed position and not return after switching the engine on. If the vehicle continues to be driven in this condition, the emergency engine stop function may operate…
A12/0850/15 ↗Volltext
null The push engine start switch may remain in the pressed position and not return after switching the engine on. If the vehicle continues to be driven in this condition, the emergency engine stop function may operate and cause the engine to stop unexpectedly.
null Due to an Engine Control Module (ECM) software error, under certain very limited engine start conditions, the ECM may set an incorrect engine throttle valve position. As a result, at engine speeds in excess of 3600…
A12/0430/15 ↗Volltext
null Due to an Engine Control Module (ECM) software error, under certain very limited engine start conditions, the ECM may set an incorrect engine throttle valve position. As a result, at engine speeds in excess of 3600 rpm, the vehicle may briefly accelerate unexpectedly.
null The driver airbag inflator may have been assembled incorrectly. In the event of deployment of the airbag, the gas flow path may be blocked increasing the internal pressure in the inflator. As a result, the driver…
A12/1742/14 ↗Volltext
null The driver airbag inflator may have been assembled incorrectly. In the event of deployment of the airbag, the gas flow path may be blocked increasing the internal pressure in the inflator. As a result, the driver airbag inflator casing may crack and fragment causing injuries.
null The fixing bolt of the steering wheel may initially have been insufficiently tightened. The tightening torque of the fixing bolt may deteriorate over time as the steering wheel boss material is susceptible to…
A12/0647/13 ↗Volltext
null The fixing bolt of the steering wheel may initially have been insufficiently tightened. The tightening torque of the fixing bolt may deteriorate over time as the steering wheel boss material is susceptible to temperature changes that may cause a loss of axial tension, resulting in excessive play in the steering wheel. If the vehicle continues to be driven in this condition over a long period of time, then the steering joint may become damaged eventually leading to steering wheel free rotation.
null The brake master cylinder plunger may not meet the supplier roughness specification. In this condition when operating the braking system under light braking force the user may experience longer brake pedal travel.…
A12/0584/13 ↗Volltext
null The brake master cylinder plunger may not meet the supplier roughness specification. In this condition when operating the braking system under light braking force the user may experience longer brake pedal travel. In extreme cases reduced braking performance may occur and as a result the braking distances required to stop the vehicle will increase.