AutoDefects
English

Superminis

Nissan Micra reliability

In 246,441 UK MOT tests, 22.9% of Nissan Micra cars failed for a mechanical or structural defect. The median supermini of the same age and mileage: 22.9%.

72of 100AverageIn line with the class
Best years
2006, 2008, 2009
Years with most failures
2017, 2018, 2019
Weak spot at high mileage
Suspension and wheels, Seat belts and airbags
Official recalls
1 recalls, 1 serious
Mechanical failure rate
22.9%
Class median, same age and mileage
22.9%
MOT tests
246,441
US owner complaints
0

Failure rate by year of first registration

Mechanical failure rate at the 2024 MOT, by the year the car was first registered, against the median of its class at the same age and mileage.

This modelClass median
0%13%25%2004: 30.7%2004 Class median: 33.0%042005: 29.9%2005 Class median: 34.6%2006: 26.9%2006 Class median: 33.0%062007: 27.6%2007 Class median: 31.2%2008: 25.0%2008 Class median: 31.4%082009: 23.7%2009 Class median: 27.6%2010: 23.7%2010 Class median: 26.0%102011: 24.4%2011 Class median: 23.9%2012: 24.2%2012 Class median: 22.6%122013: 22.1%2013 Class median: 20.3%2014: 19.7%2014 Class median: 16.2%142015: 15.1%2015 Class median: 12.5%2016: 14.6%2016 Class median: 11.9%162017: 20.8%2017 Class median: 11.6%2018: 16.2%2018 Class median: 8.4%182019: 8.0%2019 Class median: 4.9%2020: 5.5%2020 Class median: 3.5%202021: 3.0%2021 Class median: 2.3%2022: 3.5%2022 Class median: 1.9%22
YearTestsMechanical failClass medianAny failRecalls
20222893.5%1.9%7.3%0
20216,7793.0%2.3%8.9%0
20206,2105.5%3.5%12.1%0
20198,5978.0%4.9%16.6%0
20189,96416.2%8.4%22.8%0
201712,62820.8%11.6%28.4%0
201610,69514.6%11.9%24.5%0
201512,94715.1%12.5%26.2%0
201414,02619.7%16.2%30.3%0
201311,48222.1%20.3%33.4%0
201211,46924.2%22.6%36.9%0
201112,57124.4%23.9%38.3%0
201015,55523.7%26.0%39.5%0
200915,48323.7%27.6%40.5%0
200814,07625.0%31.4%41.1%0
200712,93527.6%31.2%44.7%0
200617,07826.9%33.0%45.3%0
200514,80629.9%34.6%48.7%0
200410,33830.7%33.0%48.2%0
Older years (14)
YearTestsMechanical failClass medianAny failRecalls
20039,26932.8%33.4%48.3%0
20026,92033.8%30.8%45.8%0
20014,09235.5%32.2%45.9%0
20002,67437.0%32.9%47.5%0
19992,10434.6%33.2%45.3%0
19981,27336.1%35.5%46.0%0
199766334.4%34.8%46.5%0
199650636.8%34.7%47.0%0
199529232.5%31.3%43.2%0
199424032.1%27.4%41.7%0
199314734.0%33.5%38.8%0
199211823.7%23.4%31.4%0
199111728.2%20.3%33.3%0
19909639.6%25.4%43.8%0

What fails, by mileage

Share of MOT tests that failed on each system. Wear items (bulbs, tyres, wipers, plates) are excluded from the reliability score.

System0-50k km50-100k km100-150k km150k+ km
Mechanical fail9.1% (6.8)20.1% (18.7)28.7% (30.7)36.2% (38.4)
Tests52,25785,83362,57845,773
Suspension and wheels4.9% (1.9)12.2% (7.0)18.4% (14.3)24.0% (20.3)
Brakes3.6% (1.6)6.4% (5.5)7.8% (8.6)9.1% (12.1)
Engine, exhaust and emissions0.5% (0.5)1.7% (1.5)4.0% (3.4)7.5% (7.4)
Steering0.1% (0.1)0.8% (0.7)2.3% (2.3)3.8% (4.5)
Body, chassis and corrosion0.7% (0.3)3.1% (1.5)5.8% (4.3)8.1% (7.4)
Seat belts and airbags0.3% (0.2)1.0% (0.5)2.4% (0.9)4.1% (1.7)
Lights and electrics (wear)4.0% (2.7)12.5% (7.8)24.4% (17.0)33.3% (25.4)
Tyres (wear)3.3% (3.5)5.2% (5.7)6.7% (7.5)8.4% (8.8)
Wipers and windscreen (wear)4.3% (3.9)6.5% (5.1)8.3% (7.0)10.4% (8.3)
Other and plates (wear)0.1% (0.1)0.4% (0.2)0.6% (0.3)0.9% (0.6)

(…) = Class median, same age and mileage

Pre-purchase checklist for the mechanic

Built from the systems where this model fails more often than its class at 100,000 km and above, and from open recalls.

  1. Suspension and wheels: check arms, bushes, ball joints, springs and shock absorbers for play, cracks and leaks; look for uneven tyre wear.
  2. Seat belts and airbags: check every belt retracts and latches, and that the airbag/SRS light goes out after start.
  3. Recalls: ask for proof that open recall work for this model has been done (the dealer can check by VIN).

Official recalls

Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.

  • EU Safety GateSerious2025

    A production anomaly at the supplier’s facility may cause delamination of the anode in a battery cell, where electrode material detaches and can damage the current collector and separator, potentially leading to an…

    Full text

    A production anomaly at the supplier’s facility may cause delamination of the anode in a battery cell, where electrode material detaches and can damage the current collector and separator, potentially leading to an internal short circuit in the traction battery and resulting in loss of autonomy, inability to recharge, or thermal runaway which could lead to a fire.

    SR/00954/26 ↗