Utilitarios
Fiabilidad del Nissan Micra
En 246.441 inspecciones MOT británicas, el 22,9 % de los Nissan Micra no pasó por un defecto mecánico o estructural. La mediana de un utilitario con la misma edad y kilometraje: 23,4 %.
- Mejores años
- 2006, 2008, 2009
- Años con más fallos
- 2017, 2018, 2019
- Punto débil con kilometraje alto
- Suspensión y ruedas, Cinturones y airbags
- Llamadas a revisión oficiales
- 13 llamadas a revisión, 6 graves
- Tasa de fallo mecánico
- 22,9%
- Mediana de la clase, misma edad y kilometraje
- 23,4%
- inspecciones MOT
- 246.441
- Quejas en EE. UU.
- 0
Resultados MOT por año de inspección
Toda la flota de este modelo en la inspección de cada año, frente a su clase con la misma edad y kilometraje. Muestra si el modelo mantiene su nivel al envejecer.
| Año de inspección | Inspecciones | Fallo mecánico | Mediana de la clase | Cualquier fallo |
|---|---|---|---|---|
| 2024 | 246.441 | 22,9% | 23,4% | 36,1% |
| 2023 | 255.191 | 22,4% | 23,2% | 35,7% |
Tasa de fallo por año de primera matriculación
Tasa de fallo mecánico en la MOT de 2024 según el año de primera matriculación, frente a la mediana de su clase con la misma edad y kilometraje.
| Año | Inspecciones | Fallo mecánico | Mediana de la clase | Cualquier fallo | Llamadas |
|---|---|---|---|---|---|
| 2022 | 289 | 3,5% | 1,7% | 7,3% | 0 |
| 2021 | 6779 | 3,0% | 2,3% | 8,9% | 1 |
| 2020 | 6210 | 5,5% | 3,9% | 12,1% | 1 |
| 2019 | 8597 | 8,0% | 5,2% | 16,6% | 1 |
| 2018 | 9964 | 16,2% | 10,1% | 22,8% | 1 |
| 2017 | 12.628 | 20,8% | 12,1% | 28,4% | 5 |
| 2016 | 10.695 | 14,6% | 12,8% | 24,5% | 4 |
| 2015 | 12.947 | 15,1% | 14,0% | 26,2% | 3 |
| 2014 | 14.026 | 19,7% | 17,3% | 30,3% | 3 |
| 2013 | 11.482 | 22,1% | 20,6% | 33,4% | 3 |
| 2012 | 11.469 | 24,2% | 22,9% | 36,9% | 2 |
| 2011 | 12.571 | 24,4% | 24,0% | 38,3% | 2 |
| 2010 | 15.555 | 23,7% | 26,3% | 39,5% | 2 |
| 2009 | 15.483 | 23,7% | 27,9% | 40,5% | 1 |
| 2008 | 14.076 | 25,0% | 31,2% | 41,1% | 2 |
| 2007 | 12.935 | 27,6% | 31,5% | 44,7% | 2 |
| 2006 | 17.078 | 26,9% | 33,4% | 45,3% | 1 |
| 2005 | 14.806 | 29,9% | 34,0% | 48,7% | 1 |
| 2004 | 10.338 | 30,7% | 33,6% | 48,2% | 1 |
Años anteriores (14)
| Año | Inspecciones | Fallo mecánico | Mediana de la clase | Cualquier fallo | Llamadas |
|---|---|---|---|---|---|
| 2003 | 9269 | 32,8% | 34,1% | 48,3% | 1 |
| 2002 | 6920 | 33,8% | 31,6% | 45,8% | 1 |
| 2001 | 4092 | 35,5% | 32,1% | 45,9% | 1 |
| 2000 | 2674 | 37,0% | 33,9% | 47,5% | 0 |
| 1999 | 2104 | 34,6% | 34,4% | 45,3% | 0 |
| 1998 | 1273 | 36,1% | 35,5% | 46,0% | 0 |
| 1997 | 663 | 34,4% | 34,8% | 46,5% | 0 |
| 1996 | 506 | 36,8% | 34,7% | 47,0% | 0 |
| 1995 | 292 | 32,5% | 31,3% | 43,2% | 0 |
| 1994 | 240 | 32,1% | 27,4% | 41,7% | 0 |
| 1993 | 147 | 34,0% | 33,5% | 38,8% | 0 |
| 1992 | 118 | 23,7% | 23,4% | 31,4% | 0 |
| 1991 | 117 | 28,2% | 20,3% | 33,3% | 0 |
| 1990 | 96 | 39,6% | 25,4% | 43,8% | 0 |
Qué falla según el kilometraje
Porcentaje de inspecciones suspendidas en cada sistema. Los elementos de desgaste (bombillas, neumáticos, escobillas, matrículas) no cuentan para el índice.
(…) = Mediana de la clase, misma edad y kilometraje
Lista de comprobación para el mecánico antes de comprar
Basada en los sistemas en los que este modelo falla más que su clase a partir de 100.000 km y en las llamadas a revisión abiertas.
- Suspensión y ruedas: revisar brazos, silentblocks, rótulas, muelles y amortiguadores (holguras, grietas, fugas); buscar desgaste irregular de neumáticos.
- Cinturones y airbags: cada cinturón debe recogerse y abrocharse, y el testigo del airbag apagarse tras arrancar.
- Llamadas a revisión: 5 graves afectan a este modelo; pide prueba de que se hicieron
- SR/00954/26 · 2025 · A production anomaly at the supplier’s facility may cause delamination of the anode in a battery cell, where electrode material detaches…
- A12/00793/23 · 2016–2021 · The driver's seat may be faulty, which can cause the seat belt anchorages not to function as intended, creating a risk of injury in the…
- A12/00067/19 · 2016, 2017 · Cracks can be developed in the passenger airbag. This will impair it's protective function, increasing the risk of injury in the event of…
- A12/0530/18 · 2017 · The seat belt retractor internal car sensor may not function as intended. In the event of an accident, the retractors could fail to lock…
- A12/0872/15 · 2001–2008 · null There is a possibility that the lower pinion needle bearing may have been omitted from the steering system during manufacture. If this…
Comprueba un coche concreto por su VIN en las webs oficiales: NHTSA (US) · DVSA (UK)
Llamadas a revisión oficiales
Campañas publicadas por la NHTSA (EE. UU.) y el EU Safety Gate que citan este modelo. Comprueba por VIN si afecta a un coche concreto.
A production anomaly at the supplier’s facility may cause delamination of the anode in a battery cell, where electrode material detaches and can damage the current collector and separator, potentially leading to an…
SR/00954/26 ↗Texto completo
A production anomaly at the supplier’s facility may cause delamination of the anode in a battery cell, where electrode material detaches and can damage the current collector and separator, potentially leading to an internal short circuit in the traction battery and resulting in loss of autonomy, inability to recharge, or thermal runaway which could lead to a fire.
The driver's seat may be faulty, which can cause the seat belt anchorages not to function as intended, creating a risk of injury in the case of an accident.
A12/00793/23 ↗Cracks can be developed in the passenger airbag. This will impair it's protective function, increasing the risk of injury in the event of an accident.
A12/00067/19 ↗Cracks may form in the front wheel hub. The front wheel hub could consequently break leading to the front wheel become detached.
A12/0529/18 ↗The seat belt retractor internal car sensor may not function as intended. In the event of an accident, the retractors could fail to lock and in such circumstances the seatbelt would not restrain the occupant.
A12/0530/18 ↗null The ignition switch harness may not be correctly locked in position. As a result the connector may disconnect, which could result in engine shut down while driving with no possibility to restart.
A12/1150/17 ↗
Mostrar 7 llamadas más
null As a result of a design change to the engine ignition coils fitted, the internal electrical components of the coil may short circuit resulting in an engine misfire. In the worst case, this short circuit may cause a…
A12/0110/16 ↗Texto completo
null As a result of a design change to the engine ignition coils fitted, the internal electrical components of the coil may short circuit resulting in an engine misfire. In the worst case, this short circuit may cause a fuse inside the Power Distribution Module (IPDM) to fail, stopping power to the ignition relay. This may cause the engine to stall.
null There is a possibility that the lower pinion needle bearing may have been omitted from the steering system during manufacture. If this is the case, the upper bearing would be overloaded and, if left in this…
A12/0872/15 ↗Texto completo
null There is a possibility that the lower pinion needle bearing may have been omitted from the steering system during manufacture. If this is the case, the upper bearing would be overloaded and, if left in this condition, the pinion may disengage causing loss of steering control.
null The push engine start switch may remain in the pressed position and not return after switching the engine on. If the vehicle continues to be driven in this condition, the emergency engine stop function may operate…
A12/0850/15 ↗Texto completo
null The push engine start switch may remain in the pressed position and not return after switching the engine on. If the vehicle continues to be driven in this condition, the emergency engine stop function may operate and cause the engine to stop unexpectedly.
null Due to an Engine Control Module (ECM) software error, under certain very limited engine start conditions, the ECM may set an incorrect engine throttle valve position. As a result, at engine speeds in excess of 3600…
A12/0430/15 ↗Texto completo
null Due to an Engine Control Module (ECM) software error, under certain very limited engine start conditions, the ECM may set an incorrect engine throttle valve position. As a result, at engine speeds in excess of 3600 rpm, the vehicle may briefly accelerate unexpectedly.
null The driver airbag inflator may have been assembled incorrectly. In the event of deployment of the airbag, the gas flow path may be blocked increasing the internal pressure in the inflator. As a result, the driver…
A12/1742/14 ↗Texto completo
null The driver airbag inflator may have been assembled incorrectly. In the event of deployment of the airbag, the gas flow path may be blocked increasing the internal pressure in the inflator. As a result, the driver airbag inflator casing may crack and fragment causing injuries.
null The fixing bolt of the steering wheel may initially have been insufficiently tightened. The tightening torque of the fixing bolt may deteriorate over time as the steering wheel boss material is susceptible to…
A12/0647/13 ↗Texto completo
null The fixing bolt of the steering wheel may initially have been insufficiently tightened. The tightening torque of the fixing bolt may deteriorate over time as the steering wheel boss material is susceptible to temperature changes that may cause a loss of axial tension, resulting in excessive play in the steering wheel. If the vehicle continues to be driven in this condition over a long period of time, then the steering joint may become damaged eventually leading to steering wheel free rotation.
null The brake master cylinder plunger may not meet the supplier roughness specification. In this condition when operating the braking system under light braking force the user may experience longer brake pedal travel.…
A12/0584/13 ↗Texto completo
null The brake master cylinder plunger may not meet the supplier roughness specification. In this condition when operating the braking system under light braking force the user may experience longer brake pedal travel. In extreme cases reduced braking performance may occur and as a result the braking distances required to stop the vehicle will increase.