AutoDefects
Polski

Segment B

Nissan Micra — niezawodność

W 246 441 brytyjskich badaniach MOT 22,9% egzemplarzy Nissan Micra nie przeszło z powodu usterki mechanicznej lub nadwozia. Mediana dla auta segmentu B w tym samym wieku i z tym samym przebiegiem: 23,4%.

74na 100ŚredniaNa poziomie klasy
Najlepsze roczniki
2006, 2008, 2009
Roczniki z największą liczbą usterek
2017, 2018, 2019
Słaby punkt przy dużym przebiegu
Zawieszenie i koła, Pasy i poduszki powietrzne
Oficjalne akcje przywoławcze
13 akcji, poważnych: 6
Usterki mechaniczne
22,9%
Mediana klasy, ten sam wiek i przebieg
23,4%
badań MOT
246 441
Skargi właścicieli w USA
0

Wyniki badań według roku

Wszystkie egzemplarze modelu na badaniach w danym roku wobec klasy w tym samym wieku i z tym samym przebiegiem. Widać, czy model utrzymuje pozycję z wiekiem.

Rok badaniaBadaniaUsterki mechaniczneMediana klasyWszystkie usterki
2024246 44122,9%23,4%36,1%
2023255 19122,4%23,2%35,7%

Odsetek usterek według roku pierwszej rejestracji

Odsetek usterek mechanicznych na badaniu MOT w 2024 r. według roku pierwszej rejestracji, wobec mediany klasy w tym samym wieku i z tym samym przebiegiem.

Ten modelMediana klasy
0%12%25%2004: 30,7%2004 Mediana klasy: 33,6%042005: 29,9%2005 Mediana klasy: 34,0%2006: 26,9%2006 Mediana klasy: 33,4%062007: 27,6%2007 Mediana klasy: 31,5%2008: 25,0%2008 Mediana klasy: 31,2%082009: 23,7%2009 Mediana klasy: 27,9%2010: 23,7%2010 Mediana klasy: 26,3%102011: 24,4%2011 Mediana klasy: 24,0%2012: 24,2%2012 Mediana klasy: 22,9%122013: 22,1%2013 Mediana klasy: 20,6%2014: 19,7%2014 Mediana klasy: 17,3%142015: 15,1%2015 Mediana klasy: 14,0%2016: 14,6%2016 Mediana klasy: 12,8%162017: 20,8%2017 Mediana klasy: 12,1%2018: 16,2%2018 Mediana klasy: 10,1%182019: 8,0%2019 Mediana klasy: 5,2%2020: 5,5%2020 Mediana klasy: 3,9%202021: 3,0%2021 Mediana klasy: 2,3%2022: 3,5%2022 Mediana klasy: 1,7%22
RokBadaniaUsterki mechaniczneMediana klasyWszystkie usterkiAkcje
20222893,5%1,7%7,3%0
202167793,0%2,3%8,9%1
202062105,5%3,9%12,1%1
201985978,0%5,2%16,6%1
2018996416,2%10,1%22,8%1
201712 62820,8%12,1%28,4%5
201610 69514,6%12,8%24,5%4
201512 94715,1%14,0%26,2%3
201414 02619,7%17,3%30,3%3
201311 48222,1%20,6%33,4%3
201211 46924,2%22,9%36,9%2
201112 57124,4%24,0%38,3%2
201015 55523,7%26,3%39,5%2
200915 48323,7%27,9%40,5%1
200814 07625,0%31,2%41,1%2
200712 93527,6%31,5%44,7%2
200617 07826,9%33,4%45,3%1
200514 80629,9%34,0%48,7%1
200410 33830,7%33,6%48,2%1
Starsze roczniki (14)
RokBadaniaUsterki mechaniczneMediana klasyWszystkie usterkiAkcje
2003926932,8%34,1%48,3%1
2002692033,8%31,6%45,8%1
2001409235,5%32,1%45,9%1
2000267437,0%33,9%47,5%0
1999210434,6%34,4%45,3%0
1998127336,1%35,5%46,0%0
199766334,4%34,8%46,5%0
199650636,8%34,7%47,0%0
199529232,5%31,3%43,2%0
199424032,1%27,4%41,7%0
199314734,0%33,5%38,8%0
199211823,7%23,4%31,4%0
199111728,2%20,3%33,3%0
19909639,6%25,4%43,8%0

Co się psuje w zależności od przebiegu

Odsetek badań niezaliczonych z powodu danego układu. Elementy eksploatacyjne (żarówki, opony, wycieraczki, tablice) nie wpływają na wskaźnik niezawodności.

Układ0-50k km50-100k km100-150k km150k+ km
Usterki mechaniczne9,1% (7,1)20,1% (19,6)28,7% (31,1)36,2% (38,4)
Badania52 25785 83362 57845 773
Zawieszenie i koła4,9% (2,0)12,2% (7,2)18,4% (14,6)24,0% (18,8)
Hamulce3,6% (2,0)6,4% (5,6)7,8% (9,7)9,1% (12,9)
Silnik, wydech i emisja0,5% (0,6)1,7% (1,7)4,0% (3,9)7,5% (7,4)
Układ kierowniczy0,1% (0,2)0,8% (1,4)2,3% (2,9)3,8% (4,6)
Nadwozie, podwozie i korozja0,7% (0,4)3,1% (1,7)5,8% (5,1)8,1% (8,0)
Pasy i poduszki powietrzne0,3% (0,2)1,0% (0,5)2,4% (1,1)4,1% (1,7)
Oświetlenie i elektryka (eksploatacja)4,0% (3,2)12,5% (9,1)24,4% (17,4)33,3% (25,7)
Opony (eksploatacja)3,3% (3,5)5,2% (5,7)6,7% (7,4)8,4% (8,9)
Wycieraczki i szyba (eksploatacja)4,3% (4,0)6,5% (5,3)8,3% (7,0)10,4% (8,1)
Inne i tablice (eksploatacja)0,1% (0,1)0,4% (0,2)0,6% (0,3)0,9% (0,6)

(…) = Mediana klasy, ten sam wiek i przebieg

Lista kontrolna dla mechanika przed zakupem

Na podstawie układów, w których ten model psuje się częściej niż jego klasa przy przebiegu od 100 000 km, oraz otwartych akcji przywoławczych.

  1. Zawieszenie i koła: sprawdź wahacze, tuleje, sworznie, sprężyny i amortyzatory pod kątem luzów, pęknięć i wycieków; zwróć uwagę na nierówne zużycie opon.
  2. Pasy i poduszki: każdy pas musi się zwijać i zapinać, a kontrolka SRS gasnąć po uruchomieniu.
  3. Akcje przywoławcze: poważnych akcji dla modelu — 5. Poproś o potwierdzenie wykonania napraw
    • SR/00954/26 · 2025 · A production anomaly at the supplier’s facility may cause delamination of the anode in a battery cell, where electrode material detaches…
    • A12/00793/23 · 2016–2021 · The driver's seat may be faulty, which can cause the seat belt anchorages not to function as intended, creating a risk of injury in the…
    • A12/00067/19 · 2016, 2017 · Cracks can be developed in the passenger airbag. This will impair it's protective function, increasing the risk of injury in the event of…
    • A12/0530/18 · 2017 · The seat belt retractor internal car sensor may not function as intended. In the event of an accident, the retractors could fail to lock…
    • A12/0872/15 · 2001–2008 · null There is a possibility that the lower pinion needle bearing may have been omitted from the steering system during manufacture. If this…

    Sprawdź konkretne auto po VIN na oficjalnych stronach: NHTSA (US) · DVSA (UK)

Oficjalne akcje przywoławcze

Akcje opublikowane przez NHTSA (USA) i EU Safety Gate, w których wymieniono ten model. Czy dotyczą konkretnego auta, sprawdź po VIN.

  • EU Safety GatePoważne2025

    A production anomaly at the supplier’s facility may cause delamination of the anode in a battery cell, where electrode material detaches and can damage the current collector and separator, potentially leading to an…

    Pełny tekst

    A production anomaly at the supplier’s facility may cause delamination of the anode in a battery cell, where electrode material detaches and can damage the current collector and separator, potentially leading to an internal short circuit in the traction battery and resulting in loss of autonomy, inability to recharge, or thermal runaway which could lead to a fire.

    SR/00954/26 ↗
  • EU Safety GatePoważne2016–2021

    The driver's seat may be faulty, which can cause the seat belt anchorages not to function as intended, creating a risk of injury in the case of an accident.

    A12/00793/23 ↗
  • EU Safety GatePoważne2016, 2017

    Cracks can be developed in the passenger airbag. This will impair it's protective function, increasing the risk of injury in the event of an accident.

    A12/00067/19 ↗
  • EU Safety Gate2017

    Cracks may form in the front wheel hub. The front wheel hub could consequently break leading to the front wheel become detached.

    A12/0529/18 ↗
  • EU Safety GatePoważne2017

    The seat belt retractor internal car sensor may not function as intended. In the event of an accident, the retractors could fail to lock and in such circumstances the seatbelt would not restrain the occupant.

    A12/0530/18 ↗
  • EU Safety Gate2016, 2017

    null The ignition switch harness may not be correctly locked in position. As a result the connector may disconnect, which could result in engine shut down while driving with no possibility to restart.

    A12/1150/17 ↗
Pokaż jeszcze 7 akcji
  • EU Safety Gate2015, 2016

    null As a result of a design change to the engine ignition coils fitted, the internal electrical components of the coil may short circuit resulting in an engine misfire. In the worst case, this short circuit may cause a…

    Pełny tekst

    null As a result of a design change to the engine ignition coils fitted, the internal electrical components of the coil may short circuit resulting in an engine misfire. In the worst case, this short circuit may cause a fuse inside the Power Distribution Module (IPDM) to fail, stopping power to the ignition relay. This may cause the engine to stall.

    A12/0110/16 ↗
  • EU Safety GatePoważne2001–2008

    null There is a possibility that the lower pinion needle bearing may have been omitted from the steering system during manufacture. If this is the case, the upper bearing would be overloaded and, if left in this…

    Pełny tekst

    null There is a possibility that the lower pinion needle bearing may have been omitted from the steering system during manufacture. If this is the case, the upper bearing would be overloaded and, if left in this condition, the pinion may disengage causing loss of steering control.

    A12/0872/15 ↗
  • EU Safety Gate2013–2015

    null The push engine start switch may remain in the pressed position and not return after switching the engine on. If the vehicle continues to be driven in this condition, the emergency engine stop function may operate…

    Pełny tekst

    null The push engine start switch may remain in the pressed position and not return after switching the engine on. If the vehicle continues to be driven in this condition, the emergency engine stop function may operate and cause the engine to stop unexpectedly.

    A12/0850/15 ↗
  • EU Safety Gate2010–2015

    null Due to an Engine Control Module (ECM) software error, under certain very limited engine start conditions, the ECM may set an incorrect engine throttle valve position. As a result, at engine speeds in excess of 3600…

    Pełny tekst

    null Due to an Engine Control Module (ECM) software error, under certain very limited engine start conditions, the ECM may set an incorrect engine throttle valve position. As a result, at engine speeds in excess of 3600 rpm, the vehicle may briefly accelerate unexpectedly.

    A12/0430/15 ↗
  • EU Safety GatePoważne2007–2014

    null The driver airbag inflator may have been assembled incorrectly. In the event of deployment of the airbag, the gas flow path may be blocked increasing the internal pressure in the inflator. As a result, the driver…

    Pełny tekst

    null The driver airbag inflator may have been assembled incorrectly. In the event of deployment of the airbag, the gas flow path may be blocked increasing the internal pressure in the inflator. As a result, the driver airbag inflator casing may crack and fragment causing injuries.

    A12/1742/14 ↗
  • EU Safety Gate

    null The fixing bolt of the steering wheel may initially have been insufficiently tightened. The tightening torque of the fixing bolt may deteriorate over time as the steering wheel boss material is susceptible to…

    Pełny tekst

    null The fixing bolt of the steering wheel may initially have been insufficiently tightened. The tightening torque of the fixing bolt may deteriorate over time as the steering wheel boss material is susceptible to temperature changes that may cause a loss of axial tension, resulting in excessive play in the steering wheel. If the vehicle continues to be driven in this condition over a long period of time, then the steering joint may become damaged eventually leading to steering wheel free rotation.

    A12/0647/13 ↗
  • EU Safety Gate

    null The brake master cylinder plunger may not meet the supplier roughness specification. In this condition when operating the braking system under light braking force the user may experience longer brake pedal travel.…

    Pełny tekst

    null The brake master cylinder plunger may not meet the supplier roughness specification. In this condition when operating the braking system under light braking force the user may experience longer brake pedal travel. In extreme cases reduced braking performance may occur and as a result the braking distances required to stop the vehicle will increase.

    A12/0584/13 ↗