Segment B
Peugeot 208 — niezawodność
W 207 394 brytyjskich badaniach MOT 17,9% egzemplarzy Peugeot 208 nie przeszło z powodu usterki mechanicznej lub nadwozia. Mediana dla auta segmentu B w tym samym wieku i z tym samym przebiegiem: 16,0%.
- Najlepsze roczniki
- —
- Roczniki z największą liczbą usterek
- 2019, 2020, 2022
- Słaby punkt przy dużym przebiegu
- Silnik, wydech i emisja, Nadwozie, podwozie i korozja
- Oficjalne akcje przywoławcze
- 58 akcji, poważnych: 17
- Usterki mechaniczne
- 17,9%
- Mediana klasy, ten sam wiek i przebieg
- 16,0%
- badań MOT
- 207 394
- Skargi właścicieli w USA
- 0
Wyniki badań według roku
Wszystkie egzemplarze modelu na badaniach w danym roku wobec klasy w tym samym wieku i z tym samym przebiegiem. Widać, czy model utrzymuje pozycję z wiekiem.
| Rok badania | Badania | Usterki mechaniczne | Mediana klasy | Wszystkie usterki |
|---|---|---|---|---|
| 2024 | 207 394 | 17,9% | 16,0% | 29,0% |
| 2023 | 195 427 | 16,1% | 14,7% | 26,5% |
Odsetek usterek według roku pierwszej rejestracji
Odsetek usterek mechanicznych na badaniu MOT w 2024 r. według roku pierwszej rejestracji, wobec mediany klasy w tym samym wieku i z tym samym przebiegiem.
| Rok | Badania | Usterki mechaniczne | Mediana klasy | Wszystkie usterki | Akcje |
|---|---|---|---|---|---|
| 2022 | 852 | 2,6% | 1,9% | 6,9% | 13 |
| 2021 | 14 661 | 2,8% | 2,8% | 12,3% | 14 |
| 2020 | 13 299 | 5,4% | 4,3% | 18,6% | 15 |
| 2019 | 17 052 | 7,5% | 5,6% | 18,7% | 18 |
| 2018 | 15 266 | 10,6% | 10,5% | 23,8% | 12 |
| 2017 | 17 563 | 14,4% | 13,5% | 26,6% | 17 |
| 2016 | 25 778 | 15,6% | 16,3% | 27,3% | 15 |
| 2015 | 27 384 | 18,9% | 17,5% | 30,3% | 15 |
| 2014 | 28 723 | 25,0% | 21,4% | 35,6% | 17 |
| 2013 | 32 666 | 29,6% | 25,4% | 39,5% | 17 |
| 2012 | 14 114 | 32,0% | 27,5% | 41,0% | 17 |
Co się psuje w zależności od przebiegu
Odsetek badań niezaliczonych z powodu danego układu. Elementy eksploatacyjne (żarówki, opony, wycieraczki, tablice) nie wpływają na wskaźnik niezawodności.
(…) = Mediana klasy, ten sam wiek i przebieg
Lista kontrolna dla mechanika przed zakupem
Na podstawie układów, w których ten model psuje się częściej niż jego klasa przy przebiegu od 100 000 km, oraz otwartych akcji przywoławczych.
- Silnik i wydech: szukaj wycieków oleju i płynu chłodniczego, nieszczelności i korozji wydechu, kontrolek; w dieslu stan DPF/EGR i dymienie.
- Nadwozie i podwozie: obejrzyj progi, ramy pomocnicze, punkty podnoszenia i podłogę pod kątem korozji i śladów napraw.
- Akcje przywoławcze: poważnych akcji dla modelu — 5. Poproś o potwierdzenie wykonania napraw
- SR/03006/26 · 2026 · The coolant used may not be compatible with the vehicle’s cooling system. Over time, this could cause corrosion, blockages, damage to hoses…
- SR/00819/26 · 2008–2026 · The vehicle may have contact, or insufficient clearance (< 10 mm), between the petrol particulate filter pipe and the terminal protection…
- SR/02936/25 · 2008–2025 · The vehicle may have a fuel leak in the high-pressure hose, between the high-pressure pump and the rail, because of loose nuts. This may…
- SR/02876/25 · 2023–2025 · The fuel tank may not be leakproof and could allow fuel to leak out. In the event of leakage, leaking fuel may be ignited on hot components…
- SR/00882/25 · 2022–2024 · The oil jet cooling nozzles may be damaged. Failure to cool the crankshaft and/or pistons can cause damage to them and result in the engine…
Sprawdź konkretne auto po VIN na oficjalnych stronach: NHTSA (US) · DVSA (UK)
Oficjalne akcje przywoławcze
Akcje opublikowane przez NHTSA (USA) i EU Safety Gate, w których wymieniono ten model. Czy dotyczą konkretnego auta, sprawdź po VIN.
The coolant used may not be compatible with the vehicle’s cooling system. Over time, this could cause corrosion, blockages, damage to hoses and joints, and coolant leaks, reducing cooling performance and potentially…
SR/03006/26 ↗Pełny tekst
The coolant used may not be compatible with the vehicle’s cooling system. Over time, this could cause corrosion, blockages, damage to hoses and joints, and coolant leaks, reducing cooling performance and potentially causing the engine or hybrid components to overheat and leading to reduced vehicle performance or loss of propulsion assistance. Moreover, a coolant leak could also cause an electrical short circuit in the system, increasing the risk of fire.
The upper bolts on the lower suspension arm may not have been tightened correctly. This could cause the arm to loosen, creating a clicking noise at the front and potentially leading to loss of vehicle control,…
SR/01584/26 ↗Pełny tekst
The upper bolts on the lower suspension arm may not have been tightened correctly. This could cause the arm to loosen, creating a clicking noise at the front and potentially leading to loss of vehicle control, increasing the risk of an accident.
The DV5R engine may experience a loss of power due to slippage of the water pump pulley. This slippage can cause misalignment of the timing belt, potentially resulting in engine shutdown. The sprocket of the water pump…
SR/00970/26 ↗Pełny tekst
The DV5R engine may experience a loss of power due to slippage of the water pump pulley. This slippage can cause misalignment of the timing belt, potentially resulting in engine shutdown. The sprocket of the water pump pulley may detach from the shaft, which can lead to the loss of parts on the road and increase the risk of accidents and injuries.
The vehicle may have contact, or insufficient clearance (< 10 mm), between the petrol particulate filter pipe and the terminal protection cap of the 48 V belt starter generator. In wet conditions, the insufficient…
SR/00819/26 ↗Pełny tekst
The vehicle may have contact, or insufficient clearance (< 10 mm), between the petrol particulate filter pipe and the terminal protection cap of the 48 V belt starter generator. In wet conditions, the insufficient clearance and possible contact between these components can lead to water infiltration, causing an electric arc, that could trigger a thermal event, such as overheating, which may lead to fire.
The vehicle may have a fuel leak in the high-pressure hose, between the high-pressure pump and the rail, because of loose nuts. This may cause a fire in the vehicle.
SR/02936/25 ↗The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…
SR/03153/25 ↗Pełny tekst
The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.
Pokaż jeszcze 52 akcji
The fuel tank may not be leakproof and could allow fuel to leak out. In the event of leakage, leaking fuel may be ignited on hot components or from sparks and catch fire.
SR/02876/25 ↗Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…
SR/02658/25 ↗Pełny tekst
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.
The aluminium of the EBS valve block may not fully cast around the valves. This can lead to an internal leak of brake fluid (from one or more of the 12 valve seats) resulting in a reduction of the fluid level and the…
SR/02104/25 ↗Pełny tekst
The aluminium of the EBS valve block may not fully cast around the valves. This can lead to an internal leak of brake fluid (from one or more of the 12 valve seats) resulting in a reduction of the fluid level and the deactivation of stability control due to damage to the pressure sensor. The brake fluid could come into contact with the printed circuit board and result in the deactivation of all control functions (including the anti-lock system and electronic brake force distribution).
The oil jet cooling nozzles may be damaged. Failure to cool the crankshaft and/or pistons can cause damage to them and result in the engine stalling. This can lead to a hole forming in the engine casing, causing oil…
SR/00882/25 ↗Pełny tekst
The oil jet cooling nozzles may be damaged. Failure to cool the crankshaft and/or pistons can cause damage to them and result in the engine stalling. This can lead to a hole forming in the engine casing, causing oil leaks onto the exhaust pipe. This can cause a fire to start in the engine compartment, causing the vehicle to catch fire.
The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started,…
SR/01450/25 ↗Pełny tekst
The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started, to an acceleration power's loss and to the engine suddenly cutting out while driving. This increases the risk of accidents and injuries.
In certain vehicles fitted with the DV5R E6.3 engine, the nitrogen oxide (NOx) emissions are above the regulatory limits. Excessive NOx emissions pose a risk to the environment.
A12/02824/24 ↗A crack located inside the Electric Power Steering motor of the steering rack can cause plastic parts to detach from the worm wheel. This can lead to a steering blockage, increasing the risk of accidents and injuries.
A12/02727/24 ↗The Motor Control Unit (MCU) can incorrectly indicate an internal loss of insulation, resulting in the clutch opening for safety reasons and an unexpected loss of propulsion. This increases the risk of an accident.
A11/00058/24 ↗The rear axle may not be properly welded, which could result in cracks being formed over time. Consequently, the rear axle could break and cause reduced steerability, increasing the risk of and accident.
A12/00807/24 ↗A fastening clip on the windscreen pillar trim could be rotated by 180°. As a result, when the curtain airbag is deployed, the trim on the windscreen pillar could become detached, injuring the vehicle occupants.
A12/03126/23 ↗A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.
A12/01870/23 ↗The rubber in the tyres originally supplied with the car may be inadequate, which can decrease manoeuvrability by affecting the electronic stability programme (ESP), creating a risk of an accident.
A12/01563/23 ↗Due to damage to the heating/ventilation/air conditioning (HVAC) harness caused by contact with the clutch pedal, the air conditioning may be activated automatically. This could lead to a fire as a result of a short…
A12/00439/23 ↗Pełny tekst
Due to damage to the heating/ventilation/air conditioning (HVAC) harness caused by contact with the clutch pedal, the air conditioning may be activated automatically. This could lead to a fire as a result of a short circuit in the wires.
The vehicle may inadvertently accelerate approximately 30 km/h above the set cruise-control speed when cruise control and the ECO mode are activated. This could increase the risk of an accident.
A12/00332/23 ↗The locking nuts of the steering tie rods may not be properly tightened. This could lead to loss of control over the vehicle, creating a risk of an accident.
A12/00246/23 ↗Improper torque on wheel/axle connection may lead to the loss of connection between a wheel and the axle (front and rear), or a rupture of the rear brake line/hose or an unexpected opening of a door while driving can…
A12/01494/22 ↗Pełny tekst
Improper torque on wheel/axle connection may lead to the loss of connection between a wheel and the axle (front and rear), or a rupture of the rear brake line/hose or an unexpected opening of a door while driving can occur, increasing the risk of injury.
The fuel line can rub against other components, leading to fuel leaks, which create a risk of fire.
A12/01315/22 ↗The high voltage wiring harness may be defective. This could result in an increased risk of fire.
A12/01307/22 ↗The open circuit detecting system on the high voltage circuit may be over-sensitive and could unnecessarily cut off the electric current. As a result, the vehicle may lose power during driving, increasing the risk of an…
A12/00570/22 ↗Pełny tekst
The open circuit detecting system on the high voltage circuit may be over-sensitive and could unnecessarily cut off the electric current. As a result, the vehicle may lose power during driving, increasing the risk of an accident. Moreover, it could be impossible to restart or move the vehicle for several minutes.
Improperly tightened rear axle components can result in the loss or damage of several parts (rod for the wheel and the chassis, brake caliper, rear axle fixing, ABS sensor, brake housing, brake housing support). This…
A11/00055/22 ↗Pełny tekst
Improperly tightened rear axle components can result in the loss or damage of several parts (rod for the wheel and the chassis, brake caliper, rear axle fixing, ABS sensor, brake housing, brake housing support). This can lead to a loss of driving stability, increasing the risk of an accident.
The fastenings on the rear axle are tightened with incorrect torques. This may lead to loosening of connections, deterioration in braking performance, loss of control over the vehicle and even to a loss of a wheel,…
A12/00532/22 ↗Pełny tekst
The fastenings on the rear axle are tightened with incorrect torques. This may lead to loosening of connections, deterioration in braking performance, loss of control over the vehicle and even to a loss of a wheel, thereby endangering the surrounding traffic.
Improper rings used for rocker panel protectors can cause them to come loose and fall on the road, posing a risk to traffic.Contact may occur between the vacuum hose and the surrounding parts. This may result in loss of…
A12/00418/22 ↗Pełny tekst
Improper rings used for rocker panel protectors can cause them to come loose and fall on the road, posing a risk to traffic.Contact may occur between the vacuum hose and the surrounding parts. This may result in loss of the braking assistance, increasing the risk of an accident.The bonnet locking screws are insufficiently tightened. As a result, the bonnet could become detached while driving, increasing the risk of an accident.
Due to an error in the manufacturing process, a short circuit may occur in the battery located under the front bonnet.This could increase the risk of fire while the vehicle is being charged or on is in motion.
A12/00171/22 ↗Computer software used in after-sales operations between October 2020 and January 2021 was incorrect. This may lead to Nitrogen Oxides (NOx) emissions above the regulatory limits. Excessive NOx emissions pose a risk to…
A12/00046/22 ↗Pełny tekst
Computer software used in after-sales operations between October 2020 and January 2021 was incorrect. This may lead to Nitrogen Oxides (NOx) emissions above the regulatory limits. Excessive NOx emissions pose a risk to the environment.
The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of…
A12/01184/21 ↗Pełny tekst
The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The clutch pedal on the instructor side may be impinging on the wiring harness of the heating/ventilation/air conditioning (HVAC) block. As a result, the ventilation motor will speed up, leading to increased risk of…
A12/00550/21 ↗The vacuum pump may be damaged due to material abrasion of the cog belt.As a result, the braking assistance could be reduced or lost, increasing the risk of an accident.
A12/01505/20 ↗The high-pressure pump has not been tightened to the engine with the correct torque. As a result, fuel may leak onto the road, posing a risk to the following traffic.
A12/01462/20 ↗The wheel alignment of the front axle may be incorrect.This may result in unstable road handling of the vehicle, increasing the risk of an accident.
A12/01171/20 ↗The fixings of the rear shock absorbers are not properly tightened. Consequently, the shock absorbers could fall while the vehicle is in movement increasing the risk of accident to incoming traffic.
A12/01021/20 ↗The front wheelhouse trims may be insufficiently fastened.As a result, they may become detached in motion, posing a risk to the following traffic.
A12/00762/20 ↗The steering column may not be manufactured according to the specifications.This may result in steering failure and loss of control over the vehicle, increasing the risk of an accident.
A12/00751/20 ↗The rear-axle fixing screws may be defective and could break.This may result in loss of the rear axle while driving, increasing the risk of an accident.
A12/00016/19 ↗A plastic component (spacer) included in the exhaust line could damage the Diesel Particle Filter (DPF) under certain conditions, creating small cracks or holes. Depending on the amount of damage, the particulate…
A12/1593/19 ↗Pełny tekst
A plastic component (spacer) included in the exhaust line could damage the Diesel Particle Filter (DPF) under certain conditions, creating small cracks or holes. Depending on the amount of damage, the particulate emission level could exceed regulatory limits.
Wrong engine calibration tuning might cause the exhaust emissions' level of nitrogen oxides (NOx) to exceed regulated limits. Nitrogen oxides are harmful to human health and the environment.
A12/1594/19 ↗The rear axle connection may be inadequate and could break. As a result, the rear axle may be disconnected from the vehicle, increasing the risk of an accident.
A12/0975/19 ↗The steering column may have been incorrectly fixed to the shaft of the vehicle's steering system. The steering column might consequently detach from the steering system, leading to a loss of steering control.
A12/0236/19 ↗The front wheel axle assembly may be incorrectly tightened. This may lead to a loss of connection between the steering and the front wheel axle, resulting in an accident causing injury to vehicle occupants or other road…
A12/0624/18 ↗Pełny tekst
The front wheel axle assembly may be incorrectly tightened. This may lead to a loss of connection between the steering and the front wheel axle, resulting in an accident causing injury to vehicle occupants or other road users.
Screws anchoring the alternator and the air conditioning compressor may not be tightened to the correct torque. As a result, the alternator or the compressor could detach from the engine and fall onto the road.
A12/0487/18 ↗null The fixing screws of the wheel axles on the rear cross member may not be tightened correctly. As a result, they could loosen leading to a loss of vehicle control while driving.
A12/1726/17 ↗null The front axle may not have been assembled with the correct tightening torques. As result, parts of the front axle could become loose leading to impaired steering capacity of the vehicle.
A12/1670/17 ↗null An internal component of an electric relay is faulty. As a consequence, the starter may not be activated, the starter control may be constantly blocked or the starter may operate unexpectedly. This could lead to…
A12/0571/17 ↗Pełny tekst
null An internal component of an electric relay is faulty. As a consequence, the starter may not be activated, the starter control may be constantly blocked or the starter may operate unexpectedly. This could lead to unexpected movement of the vehicle or fire caused by damage to the starter due to overheating.
null A problem with a component of the gearbox actuator could prevent gear changing or cause the driver to change to the wrong gear. This could lead to the vehicle moving in the opposite direction to that intended by…
A12/0479/17 ↗Pełny tekst
null A problem with a component of the gearbox actuator could prevent gear changing or cause the driver to change to the wrong gear. This could lead to the vehicle moving in the opposite direction to that intended by the driver.
null A failure in the manufacturer’s gluing process when assembling the rear spoiler could lead to parts of the spoiler detaching while the vehicle is moving, causing a hazard for following vehicles.
A12/0480/17 ↗null Possible presence of a plastic part in an inlet valve of the ABS/ESP (anti-lock braking system/electronic stabilisation program) unit may cause faulty regulation by the ABS/ESP and untimely wheel-locking.
A12/1361/16 ↗null The welding of the fuel injector of the engine may be incorrect. This can lead to a breakdown of the engine and the display of a warning light and alert message on the dashboard. In extreme circumstances, fuel may…
A12/1110/16 ↗Pełny tekst
null The welding of the fuel injector of the engine may be incorrect. This can lead to a breakdown of the engine and the display of a warning light and alert message on the dashboard. In extreme circumstances, fuel may leak which could lead to a fire.
null Oil may leak from the turbocharger on to hot engine parts which could lead to a fire breaking out, even after the engine has been switched off.
A12/0437/16 ↗null The roll-over valve located inside the petrol tank may not work properly. In case of the vehicle turning over, a fuel leak could occur which may lead to a fire.
A12/0241/16 ↗null On affected vehicles, non-conformity of an internal component of the tailgate stabiliser could eventually prevent the tailgate from being held in the open position.
A12/1052/14 ↗null The possible non-conformity of the front suspension mounting bolts could lead to bolt breakage which could lead to difficulties in controlling the vehicle path.
A12/1053/14 ↗null Risk of loosening the rear wheel’s central nut under certain conditions (after shocks or wheel rolling with a seized bearing), which could cause noise, vibration and taking important clearance at the wheel’s hub.
A12/0540/13 ↗null A lack of conformity in the assembly of an internal component of the ABS/ESP system may result in an inability to modulate the fluid pressure when the ABS/ESP function is used. This may lead to a system malfunction.
A12/1904/12 ↗