Superminis
Peugeot 208 reliability
In 207,394 UK MOT tests, 17.9% of Peugeot 208 cars failed for a mechanical or structural defect. The median supermini of the same age and mileage: 15.1%.
- Best years
- —
- Years with most failures
- 2015, 2019, 2020
- Weak spot at high mileage
- Engine, exhaust and emissions, Body, chassis and corrosion
- Official recalls
- 13 recalls, 5 serious
- Mechanical failure rate
- 17.9%
- Class median, same age and mileage
- 15.1%
- MOT tests
- 207,394
- US owner complaints
- 0
Failure rate by year of first registration
Mechanical failure rate at the 2024 MOT, by the year the car was first registered, against the median of its class at the same age and mileage.
| Year | Tests | Mechanical fail | Class median | Any fail | Recalls |
|---|---|---|---|---|---|
| 2022 | 852 | 2.6% | 2.1% | 6.9% | 7 |
| 2021 | 14,661 | 2.8% | 2.8% | 12.3% | 6 |
| 2020 | 13,299 | 5.4% | 3.9% | 18.6% | 6 |
| 2019 | 17,052 | 7.5% | 5.2% | 18.7% | 6 |
| 2018 | 15,266 | 10.6% | 8.8% | 23.8% | 6 |
| 2017 | 17,563 | 14.4% | 12.9% | 26.6% | 6 |
| 2016 | 25,778 | 15.6% | 14.8% | 27.3% | 6 |
| 2015 | 27,384 | 18.9% | 15.2% | 30.3% | 6 |
| 2014 | 28,723 | 25.0% | 20.4% | 35.6% | 6 |
| 2013 | 32,666 | 29.6% | 25.2% | 39.5% | 6 |
| 2012 | 14,114 | 32.0% | 27.3% | 41.0% | 6 |
What fails, by mileage
Share of MOT tests that failed on each system. Wear items (bulbs, tyres, wipers, plates) are excluded from the reliability score.
(…) = Class median, same age and mileage
Pre-purchase checklist for the mechanic
Built from the systems where this model fails more often than its class at 100,000 km and above, and from open recalls.
- Engine and exhaust: check for oil and coolant leaks, exhaust leaks and corrosion, warning lights, and (diesel) DPF/EGR faults and smoke.
- Body and chassis: inspect sills, subframes, jacking points and the floor for corrosion and previous repairs.
- Recalls: ask for proof that open recall work for this model has been done (the dealer can check by VIN).
Official recalls
Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.
The coolant used may not be compatible with the vehicle’s cooling system. Over time, this could cause corrosion, blockages, damage to hoses and joints, and coolant leaks, reducing cooling performance and potentially…
SR/03006/26 ↗Full text
The coolant used may not be compatible with the vehicle’s cooling system. Over time, this could cause corrosion, blockages, damage to hoses and joints, and coolant leaks, reducing cooling performance and potentially causing the engine or hybrid components to overheat and leading to reduced vehicle performance or loss of propulsion assistance. Moreover, a coolant leak could also cause an electrical short circuit in the system, increasing the risk of fire.
The upper bolts on the lower suspension arm may not have been tightened correctly. This could cause the arm to loosen, creating a clicking noise at the front and potentially leading to loss of vehicle control,…
SR/01584/26 ↗Full text
The upper bolts on the lower suspension arm may not have been tightened correctly. This could cause the arm to loosen, creating a clicking noise at the front and potentially leading to loss of vehicle control, increasing the risk of an accident.
The DV5R engine may experience a loss of power due to slippage of the water pump pulley. This slippage can cause misalignment of the timing belt, potentially resulting in engine shutdown. The sprocket of the water pump…
SR/00970/26 ↗Full text
The DV5R engine may experience a loss of power due to slippage of the water pump pulley. This slippage can cause misalignment of the timing belt, potentially resulting in engine shutdown. The sprocket of the water pump pulley may detach from the shaft, which can lead to the loss of parts on the road and increase the risk of accidents and injuries.
The vehicle may have contact, or insufficient clearance (< 10 mm), between the petrol particulate filter pipe and the terminal protection cap of the 48 V belt starter generator. In wet conditions, the insufficient…
SR/00819/26 ↗Full text
The vehicle may have contact, or insufficient clearance (< 10 mm), between the petrol particulate filter pipe and the terminal protection cap of the 48 V belt starter generator. In wet conditions, the insufficient clearance and possible contact between these components can lead to water infiltration, causing an electric arc, that could trigger a thermal event, such as overheating, which may lead to fire.
The vehicle may have a fuel leak in the high-pressure hose, between the high-pressure pump and the rail, because of loose nuts. This may cause a fire in the vehicle.
SR/02936/25 ↗The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…
SR/03153/25 ↗Full text
The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.
Show 7 more recalls
The fuel tank may not be leakproof and could allow fuel to leak out. In the event of leakage, leaking fuel may be ignited on hot components or from sparks and catch fire.
SR/02876/25 ↗Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…
SR/02658/25 ↗Full text
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.
The aluminium of the EBS valve block may not fully cast around the valves. This can lead to an internal leak of brake fluid (from one or more of the 12 valve seats) resulting in a reduction of the fluid level and the…
SR/02104/25 ↗Full text
The aluminium of the EBS valve block may not fully cast around the valves. This can lead to an internal leak of brake fluid (from one or more of the 12 valve seats) resulting in a reduction of the fluid level and the deactivation of stability control due to damage to the pressure sensor. The brake fluid could come into contact with the printed circuit board and result in the deactivation of all control functions (including the anti-lock system and electronic brake force distribution).
The oil jet cooling nozzles may be damaged. Failure to cool the crankshaft and/or pistons can cause damage to them and result in the engine stalling. This can lead to a hole forming in the engine casing, causing oil…
SR/00882/25 ↗Full text
The oil jet cooling nozzles may be damaged. Failure to cool the crankshaft and/or pistons can cause damage to them and result in the engine stalling. This can lead to a hole forming in the engine casing, causing oil leaks onto the exhaust pipe. This can cause a fire to start in the engine compartment, causing the vehicle to catch fire.
The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started,…
SR/01450/25 ↗Full text
The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started, to an acceleration power's loss and to the engine suddenly cutting out while driving. This increases the risk of accidents and injuries.
In certain vehicles fitted with the DV5R E6.3 engine, the nitrogen oxide (NOx) emissions are above the regulatory limits. Excessive NOx emissions pose a risk to the environment.
A12/02824/24 ↗A crack located inside the Electric Power Steering motor of the steering rack can cause plastic parts to detach from the worm wheel. This can lead to a steering blockage, increasing the risk of accidents and injuries.
A12/02727/24 ↗