Superminis
Hyundai i20 reliability
In 129,300 UK MOT tests, 15.1% of Hyundai i20 cars failed for a mechanical or structural defect. The median supermini of the same age and mileage: 17.7%.
- Best years
- 2016, 2017, 2018
- Years with most failures
- —
- Weak spot at high mileage
- Brakes, Seat belts and airbags
- Official recalls
- 2 recalls, 0 serious
- Mechanical failure rate
- 15.1%
- Class median, same age and mileage
- 17.7%
- MOT tests
- 129,300
- US owner complaints
- 0
Failure rate by year of first registration
Mechanical failure rate at the 2024 MOT, by the year the car was first registered, against the median of its class at the same age and mileage.
| Year | Tests | Mechanical fail | Class median | Any fail | Recalls |
|---|---|---|---|---|---|
| 2022 | 419 | 1.9% | 2.2% | 9.1% | 1 |
| 2021 | 6,116 | 2.0% | 2.5% | 14.2% | 1 |
| 2020 | 4,262 | 2.4% | 3.8% | 11.0% | 1 |
| 2019 | 7,445 | 3.1% | 5.2% | 12.3% | 1 |
| 2018 | 8,733 | 4.0% | 8.7% | 14.6% | 1 |
| 2017 | 11,718 | 6.1% | 12.8% | 16.8% | 1 |
| 2016 | 13,865 | 8.5% | 14.5% | 19.3% | 1 |
| 2015 | 12,864 | 9.3% | 15.1% | 21.3% | 1 |
| 2014 | 13,066 | 17.7% | 19.2% | 31.0% | 0 |
| 2013 | 12,483 | 24.1% | 23.5% | 37.9% | 0 |
| 2012 | 9,664 | 27.5% | 25.5% | 41.6% | 0 |
| 2011 | 9,666 | 27.4% | 27.3% | 41.0% | 0 |
| 2010 | 9,628 | 26.8% | 28.1% | 40.8% | 0 |
| 2009 | 9,259 | 26.1% | 29.6% | 42.0% | 0 |
| 2008 | 95 | 25.3% | 32.8% | 41.1% | 0 |
What fails, by mileage
Share of MOT tests that failed on each system. Wear items (bulbs, tyres, wipers, plates) are excluded from the reliability score.
(…) = Class median, same age and mileage
Pre-purchase checklist for the mechanic
Built from the systems where this model fails more often than its class at 100,000 km and above, and from open recalls.
- Brakes: measure discs and pads, check brake pipes and hoses for corrosion, and test the handbrake and ABS warning light.
- Seat belts and airbags: check every belt retracts and latches, and that the airbag/SRS light goes out after start.
Official recalls
Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.
Vehicles equipped with a 1.0 T-GDI petrol engine may have an incorrectly routed vacuum hose, causing the vacuum inlet to remain under pressure and generate vibrations that could lead to cracking of the hose, potentially…
SR/01776/26 ↗Full text
Vehicles equipped with a 1.0 T-GDI petrol engine may have an incorrectly routed vacuum hose, causing the vacuum inlet to remain under pressure and generate vibrations that could lead to cracking of the hose, potentially reducing braking efficiency and increasing the risk of an accident.
The impeller that vacuums the fuel and sends it to the engine comes into contact with the outer walls of the fuel pump due to the swelling/expansion caused by operating at high temperatures and by the fuel, which can…
SR/03401/25 ↗Full text
The impeller that vacuums the fuel and sends it to the engine comes into contact with the outer walls of the fuel pump due to the swelling/expansion caused by operating at high temperatures and by the fuel, which can cause the engine to lose power and the vehicle to stop, increasing the risk of injuries.